arm64: dts: ti: k3-j721s2-main: Add BCDMA instance for CSI2RX

J721S2 has a dedicated BCDMA controller for the Camera Serial Interface.
Events from the BCDMA controller instance are routed through the
main UDMA interrupt aggregator as unmapped events. Add the node for
the DMA controller and keep it disabled by default.

See J721S2 Technical Reference Manual (SPRUJ28)
for further details: http://www.ti.com/lit/pdf/spruj28Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20231010111723.17524-2-vaishnav.a@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi

@@ -807,6 +807,7 @@ main_udmass_inta: msi-controller@33d00000 {
 			ti,sci = <&sms>;
 			ti,sci-dev-id = <265>;
 			ti,interrupt-ranges = <0 0 256>;
+			ti,unmapped-event-sources = <&main_bcdma_csi>;
 		};
 
 		secure_proxy_main: mailbox@32c00000 {
@@ -1103,6 +1104,22 @@ main_udmap: dma-controller@31150000 {
 			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
 		};
 
+		main_bcdma_csi: dma-controller@311a0000 {
+			compatible = "ti,j721s2-dmss-bcdma-csi";
+			reg = <0x00 0x311a0000 0x00 0x100>,
+			      <0x00 0x35d00000 0x00 0x20000>,
+			      <0x00 0x35c00000 0x00 0x10000>,
+			      <0x00 0x35e00000 0x00 0x80000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+			msi-parent = <&main_udmass_inta>;
+			#dma-cells = <3>;
+			ti,sci = <&sms>;
+			ti,sci-dev-id = <225>;
+			ti,sci-rm-range-rchan = <0x21>;
+			ti,sci-rm-range-tchan = <0x22>;
+			status = "disabled";
+		};
+
 		cpts@310d0000 {
 			compatible = "ti,j721e-cpts";
 			reg = <0x0 0x310d0000 0x0 0x400>;