Commit 10c7fcbd authored by Magnus Damm's avatar Magnus Damm Committed by Simon Horman

ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support

Remove the sh7372 implementation and the shared ZBOOT MMC
and SDHI support code from the compressed ARM boot loader.

With this in place it is no longer possible to boot any
self-contained kernel for sh7372 directly from Mask ROM
via SDHI and MMCIF hardware.
Signed-off-by: default avatarMagnus Damm <damm+renesas@opensource.se>
Acked-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent d1e068fd
...@@ -1848,35 +1848,6 @@ config ZBOOT_ROM ...@@ -1848,35 +1848,6 @@ config ZBOOT_ROM
Say Y here if you intend to execute your compressed kernel image Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N. (zImage) directly from ROM or flash. If unsure, say N.
choice
prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
depends on ZBOOT_ROM && ARCH_SH7372
default ZBOOT_ROM_NONE
help
Include experimental SD/MMC loading code in the ROM-able zImage.
With this enabled it is possible to write the ROM-able zImage
kernel image to an MMC or SD card and boot the kernel straight
from the reset vector. At reset the processor Mask ROM will load
the first part of the ROM-able zImage which in turn loads the
rest the kernel image to RAM.
config ZBOOT_ROM_NONE
bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
help
Do not load image from SD or MMC
config ZBOOT_ROM_MMCIF
bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
help
Load image from MMCIF hardware block.
config ZBOOT_ROM_SH_MOBILE_SDHI
bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
help
Load image from SDHI hardware block
endchoice
config ARM_APPENDED_DTB config ARM_APPENDED_DTB
bool "Use appended device tree blob to zImage (EXPERIMENTAL)" bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
depends on OF depends on OF
......
...@@ -6,21 +6,6 @@ ...@@ -6,21 +6,6 @@
OBJS = OBJS =
# Ensure that MMCIF loader code appears early in the image
# to minimise that number of bocks that have to be read in
# order to load it.
ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
OBJS += mmcif-sh7372.o
endif
# Ensure that SDHI loader code appears early in the image
# to minimise that number of bocks that have to be read in
# order to load it.
ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
OBJS += sdhi-shmobile.o
OBJS += sdhi-sh7372.o
endif
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o HEAD = head.o
OBJS += misc.o decompress.o OBJS += misc.o decompress.o
......
...@@ -25,36 +25,6 @@ ...@@ -25,36 +25,6 @@
/* load board-specific initialization code */ /* load board-specific initialization code */
#include <mach/zboot.h> #include <mach/zboot.h>
#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
/* Load image from MMC/SD */
adr sp, __tmp_stack + 256
ldr r0, __image_start
ldr r1, __image_end
subs r1, r1, r0
ldr r0, __load_base
bl mmc_loader
/* Jump to loaded code */
ldr r0, __loaded
ldr r1, __image_start
sub r0, r0, r1
ldr r1, __load_base
add pc, r0, r1
__image_start:
.long _start
__image_end:
.long _got_end
__load_base:
.long MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
__loaded:
.long __continue
.align
__tmp_stack:
.space 256
__continue:
#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
adr r0, dtb_info adr r0, dtb_info
ldmia r0, {r1, r3, r4, r5, r7} ldmia r0, {r1, r3, r4, r5, r7}
......
/*
* sh7372 MMCIF loader
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2010 Simon Horman
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/boot.h>
#include <mach/mmc.h>
#define MMCIF_BASE (void __iomem *)0xe6bd0000
#define PORT84CR (void __iomem *)0xe6050054
#define PORT85CR (void __iomem *)0xe6050055
#define PORT86CR (void __iomem *)0xe6050056
#define PORT87CR (void __iomem *)0xe6050057
#define PORT88CR (void __iomem *)0xe6050058
#define PORT89CR (void __iomem *)0xe6050059
#define PORT90CR (void __iomem *)0xe605005a
#define PORT91CR (void __iomem *)0xe605005b
#define PORT92CR (void __iomem *)0xe605005c
#define PORT99CR (void __iomem *)0xe6050063
#define SMSTPCR3 (void __iomem *)0xe615013c
/* SH7372 specific MMCIF loader
*
* loads the zImage from an MMC card starting from block 1.
*
* The image must be start with a vrl4 header and
* the zImage must start at offset 512 of the image. That is,
* at block 2 (=byte 1024) on the media
*
* Use the following line to write the vrl4 formated zImage
* to an MMC card
* # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
*/
asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
{
mmc_init_progress();
mmc_update_progress(MMC_PROGRESS_ENTER);
/* Initialise MMC
* registers: PORT84CR-PORT92CR
* (MMCD0_0-MMCD0_7,MMCCMD0 Control)
* value: 0x04 - select function 4
*/
__raw_writeb(0x04, PORT84CR);
__raw_writeb(0x04, PORT85CR);
__raw_writeb(0x04, PORT86CR);
__raw_writeb(0x04, PORT87CR);
__raw_writeb(0x04, PORT88CR);
__raw_writeb(0x04, PORT89CR);
__raw_writeb(0x04, PORT90CR);
__raw_writeb(0x04, PORT91CR);
__raw_writeb(0x04, PORT92CR);
/* Initialise MMC
* registers: PORT99CR (MMCCLK0 Control)
* value: 0x10 | 0x04 - enable output | select function 4
*/
__raw_writeb(0x14, PORT99CR);
/* Enable clock to MMC hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_INIT);
/* setup MMCIF hardware */
sh_mmcif_boot_init(MMCIF_BASE);
mmc_update_progress(MMC_PROGRESS_LOAD);
/* load kernel via MMCIF interface */
sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
(len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
/* Disable clock to MMC hardware block */
__raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
}
/*
* SuperH Mobile SDHI
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2010 Kuninori Morimoto
* Copyright (C) 2010 Simon Horman
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Parts inspired by u-boot
*/
#include <linux/io.h>
#include <mach/mmc.h>
#include <linux/mmc/boot.h>
#include <linux/mmc/tmio.h>
#include "sdhi-shmobile.h"
#define PORT179CR 0xe60520b3
#define PORT180CR 0xe60520b4
#define PORT181CR 0xe60520b5
#define PORT182CR 0xe60520b6
#define PORT183CR 0xe60520b7
#define PORT184CR 0xe60520b8
#define SMSTPCR3 0xe615013c
#define CR_INPUT_ENABLE 0x10
#define CR_FUNCTION1 0x01
#define SDHI1_BASE (void __iomem *)0xe6860000
#define SDHI_BASE SDHI1_BASE
/* SuperH Mobile SDHI loader
*
* loads the zImage from an SD card starting from block 0
* on physical partition 1
*
* The image must be start with a vrl4 header and
* the zImage must start at offset 512 of the image. That is,
* at block 1 (=byte 512) of physical partition 1
*
* Use the following line to write the vrl4 formated zImage
* to an SD card
* # dd if=vrl4.out of=/dev/sdx bs=512
*/
asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
{
int high_capacity;
mmc_init_progress();
mmc_update_progress(MMC_PROGRESS_ENTER);
/* Initialise SDHI1 */
/* PORT184CR: GPIO_FN_SDHICMD1 Control */
__raw_writeb(CR_FUNCTION1, PORT184CR);
/* PORT179CR: GPIO_FN_SDHICLK1 Control */
__raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
/* PORT181CR: GPIO_FN_SDHID1_3 Control */
__raw_writeb(CR_FUNCTION1, PORT183CR);
/* PORT182CR: GPIO_FN_SDHID1_2 Control */
__raw_writeb(CR_FUNCTION1, PORT182CR);
/* PORT183CR: GPIO_FN_SDHID1_1 Control */
__raw_writeb(CR_FUNCTION1, PORT181CR);
/* PORT180CR: GPIO_FN_SDHID1_0 Control */
__raw_writeb(CR_FUNCTION1, PORT180CR);
/* Enable clock to SDHI1 hardware block */
__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
/* setup SDHI hardware */
mmc_update_progress(MMC_PROGRESS_INIT);
high_capacity = sdhi_boot_init(SDHI_BASE);
if (high_capacity < 0)
goto err;
mmc_update_progress(MMC_PROGRESS_LOAD);
/* load kernel */
if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
0, /* Kernel is at block 1 */
(len + TMIO_BBS - 1) / TMIO_BBS, buf))
goto err;
/* Disable clock to SDHI1 hardware block */
__raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
mmc_update_progress(MMC_PROGRESS_DONE);
return;
err:
for(;;);
}
This diff is collapsed.
#ifndef SDHI_MOBILE_H
#define SDHI_MOBILE_H
#include <linux/compiler.h>
int sdhi_boot_do_read(void __iomem *base, int high_capacity,
unsigned long offset, unsigned short count,
unsigned short *buf);
int sdhi_boot_init(void __iomem *base);
#endif
#ifndef MMC_H
#define MMC_H
/**************************************************
*
* board specific settings
*
**************************************************/
#error "unsupported board."
#endif /* MMC_H */
#ifndef SDHI_SH7372_H
#define SDHI_SH7372_H
#define SDGENCNTA 0xfe40009c
/* The countdown of SDGENCNTA is controlled by
* ZB3D2CLK which runs at 149.5MHz.
* That is 149.5ticks/us. Approximate this as 150ticks/us.
*/
static void udelay(int us)
{
__raw_writel(us * 150, SDGENCNTA);
while(__raw_readl(SDGENCNTA)) ;
}
static void msleep(int ms)
{
udelay(ms * 1000);
}
#endif
#ifndef SDHI_H
#define SDHI_H
/**************************************************
*
* CPU specific settings
*
**************************************************/
#ifdef CONFIG_ARCH_SH7372
#include "mach/sdhi-sh7372.h"
#else
#error "unsupported CPU."
#endif
#endif /* SDHI_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment