Commit 10d9029b authored by Rob Herring's avatar Rob Herring Committed by Greg Kroah-Hartman

phy: add Marvell HSIC 28nm PHY

Add PHY driver for the Marvell HSIC 28nm PHY. This PHY is found in PXA1928
SOC.
Signed-off-by: default avatarRob Herring <robh@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 603c5f9d
...@@ -54,6 +54,16 @@ config PHY_EXYNOS_MIPI_VIDEO ...@@ -54,6 +54,16 @@ config PHY_EXYNOS_MIPI_VIDEO
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
and EXYNOS SoCs. and EXYNOS SoCs.
config PHY_PXA_28NM_HSIC
tristate "Marvell USB HSIC 28nm PHY Driver"
select GENERIC_PHY
help
Enable this to support Marvell USB HSIC PHY driver for Marvell
SoC. This driver will do the PHY initialization and shutdown.
The PHY driver will be used by Marvell ehci driver.
To compile this driver as a module, choose M here.
config PHY_PXA_28NM_USB2 config PHY_PXA_28NM_USB2
tristate "Marvell USB 2.0 28nm PHY Driver" tristate "Marvell USB 2.0 28nm PHY Driver"
select GENERIC_PHY select GENERIC_PHY
......
...@@ -11,6 +11,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o ...@@ -11,6 +11,7 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o
obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o obj-$(CONFIG_PHY_MIPHY365X) += phy-miphy365x.o
......
/*
* Copyright (C) 2015 Linaro, Ltd.
* Rob Herring <robh@kernel.org>
*
* Based on vendor driver:
* Copyright (C) 2013 Marvell Inc.
* Author: Chao Xie <xiechao.mail@gmail.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#define PHY_28NM_HSIC_CTRL 0x08
#define PHY_28NM_HSIC_IMPCAL_CAL 0x18
#define PHY_28NM_HSIC_PLL_CTRL01 0x1c
#define PHY_28NM_HSIC_PLL_CTRL2 0x20
#define PHY_28NM_HSIC_INT 0x28
#define PHY_28NM_HSIC_PLL_SELLPFR_SHIFT 26
#define PHY_28NM_HSIC_PLL_FBDIV_SHIFT 0
#define PHY_28NM_HSIC_PLL_REFDIV_SHIFT 9
#define PHY_28NM_HSIC_S2H_PU_PLL BIT(10)
#define PHY_28NM_HSIC_H2S_PLL_LOCK BIT(15)
#define PHY_28NM_HSIC_S2H_HSIC_EN BIT(7)
#define S2H_DRV_SE0_4RESUME BIT(14)
#define PHY_28NM_HSIC_H2S_IMPCAL_DONE BIT(27)
#define PHY_28NM_HSIC_CONNECT_INT BIT(1)
#define PHY_28NM_HSIC_HS_READY_INT BIT(2)
struct mv_hsic_phy {
struct phy *phy;
struct platform_device *pdev;
void __iomem *base;
struct clk *clk;
};
static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
{
timeout += jiffies;
while (time_is_after_eq_jiffies(timeout)) {
if ((readl(reg) & mask) == mask)
return true;
msleep(1);
}
return false;
}
static int mv_hsic_phy_init(struct phy *phy)
{
struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
clk_prepare_enable(mv_phy->clk);
/* Set reference clock */
writel(0x1 << PHY_28NM_HSIC_PLL_SELLPFR_SHIFT |
0xf0 << PHY_28NM_HSIC_PLL_FBDIV_SHIFT |
0xd << PHY_28NM_HSIC_PLL_REFDIV_SHIFT,
base + PHY_28NM_HSIC_PLL_CTRL01);
/* Turn on PLL */
writel(readl(base + PHY_28NM_HSIC_PLL_CTRL2) |
PHY_28NM_HSIC_S2H_PU_PLL,
base + PHY_28NM_HSIC_PLL_CTRL2);
/* Make sure PHY PLL is locked */
if (!wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2,
PHY_28NM_HSIC_H2S_PLL_LOCK, HZ / 10)) {
dev_err(&pdev->dev, "HSIC PHY PLL not locked after 100mS.");
clk_disable_unprepare(mv_phy->clk);
return -ETIMEDOUT;
}
return 0;
}
static int mv_hsic_phy_power_on(struct phy *phy)
{
struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
u32 reg;
reg = readl(base + PHY_28NM_HSIC_CTRL);
/* Avoid SE0 state when resume for some device will take it as reset */
reg &= ~S2H_DRV_SE0_4RESUME;
reg |= PHY_28NM_HSIC_S2H_HSIC_EN; /* Enable HSIC PHY */
writel(reg, base + PHY_28NM_HSIC_CTRL);
/*
* Calibration Timing
* ____________________________
* CAL START ___|
* ____________________
* CAL_DONE ___________|
* | 400us |
*/
/* Make sure PHY Calibration is ready */
if (!wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL,
PHY_28NM_HSIC_H2S_IMPCAL_DONE, HZ / 10)) {
dev_warn(&pdev->dev, "HSIC PHY READY not set after 100mS.");
return -ETIMEDOUT;
}
/* Waiting for HSIC connect int*/
if (!wait_for_reg(base + PHY_28NM_HSIC_INT,
PHY_28NM_HSIC_CONNECT_INT, HZ / 5)) {
dev_warn(&pdev->dev, "HSIC wait for connect interrupt timeout.");
return -ETIMEDOUT;
}
return 0;
}
static int mv_hsic_phy_power_off(struct phy *phy)
{
struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
writel(readl(base + PHY_28NM_HSIC_CTRL) & ~PHY_28NM_HSIC_S2H_HSIC_EN,
base + PHY_28NM_HSIC_CTRL);
return 0;
}
static int mv_hsic_phy_exit(struct phy *phy)
{
struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
/* Turn off PLL */
writel(readl(base + PHY_28NM_HSIC_PLL_CTRL2) &
~PHY_28NM_HSIC_S2H_PU_PLL,
base + PHY_28NM_HSIC_PLL_CTRL2);
clk_disable_unprepare(mv_phy->clk);
return 0;
}
static const struct phy_ops hsic_ops = {
.init = mv_hsic_phy_init,
.power_on = mv_hsic_phy_power_on,
.power_off = mv_hsic_phy_power_off,
.exit = mv_hsic_phy_exit,
.owner = THIS_MODULE,
};
static int mv_hsic_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct mv_hsic_phy *mv_phy;
struct resource *r;
mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
if (!mv_phy)
return -ENOMEM;
mv_phy->pdev = pdev;
mv_phy->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(mv_phy->clk)) {
dev_err(&pdev->dev, "failed to get clock.\n");
return PTR_ERR(mv_phy->clk);
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(mv_phy->base))
return PTR_ERR(mv_phy->base);
mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &hsic_ops);
if (IS_ERR(mv_phy->phy))
return PTR_ERR(mv_phy->phy);
phy_set_drvdata(mv_phy->phy, mv_phy);
phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id mv_hsic_phy_dt_match[] = {
{ .compatible = "marvell,pxa1928-hsic-phy", },
{},
};
MODULE_DEVICE_TABLE(of, mv_hsic_phy_dt_match);
static struct platform_driver mv_hsic_phy_driver = {
.probe = mv_hsic_phy_probe,
.driver = {
.name = "mv-hsic-phy",
.of_match_table = of_match_ptr(mv_hsic_phy_dt_match),
},
};
module_platform_driver(mv_hsic_phy_driver);
MODULE_AUTHOR("Rob Herring <robh@kernel.org>");
MODULE_DESCRIPTION("Marvell HSIC phy driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment