USB: check sg buffer size in usb_submit_urb

USB spec stats that short packet can only appear at the end
of transfer. Because lost of HC(EHCI/UHCI/OHCI/...) can't
build a full packet from discontinuous buffers, we introduce
the limit in usb_submit_urb() to avoid such kind of bad sg buffers
coming from driver.

The limit might be a bit strict:
	- platform has iommu to do sg list mapping
	- some host controllers may support to build full packet from
	discontinuous buffers.

But considered that most of HCs don't support that, and driver
need work well or keep consistent on different HCs and ARCHs, we
have to introduce the limit.

Currently, only usbtest is reported to pass such sg buffers to HC,
and other users(mass storage, usbfs) don't have the problem.

We don't check it on USB wireless device, because:
	- wireless devices can't be attached to common USB
	  bus(EHCI/UHCI/OHCI/...)
	- the max packet size of endpoint may be odd, and often can't
	devide 4KB which is a typical usage in usb mass storage application
Reported-by: Konstantin Filatov <kfilatov@parallels.com>
Reported-by: Denis V. Lunev <den@openvz.org>
Cc: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/urb.c

@@ -7,6 +7,7 @@
 #include <linux/usb.h>
 #include <linux/wait.h>
 #include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
 
 #define to_urb(d) container_of(d, struct urb, kref)
 
@@ -413,6 +414,13 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
 			urb->iso_frame_desc[n].status = -EXDEV;
 			urb->iso_frame_desc[n].actual_length = 0;
 		}
+	} else if (dev->speed != USB_SPEED_WIRELESS && urb->num_sgs) {
+		struct scatterlist *sg;
+		int i;
+
+		for_each_sg(urb->sg, sg, urb->num_sgs - 1, i)
+			if (sg->length % max)
+				return -EINVAL;
 	}
 
 	/* the I/O buffer must be mapped/unmapped, except when length=0 */

include/linux/usb.h

@@ -1258,7 +1258,9 @@ typedef void (*usb_complete_t)(struct urb *);
  *	the device driver is saying that it provided this DMA address,
  *	which the host controller driver should use in preference to the
  *	transfer_buffer.
- * @sg: scatter gather buffer list
+ * @sg: scatter gather buffer list, the buffer size of each element in
+ * 	the list (except the last) must be divisible by the endpoint's
+ * 	max packet size
  * @num_mapped_sgs: (internal) number of mapped sg entries
  * @num_sgs: number of entries in the sg list
  * @transfer_buffer_length: How big is transfer_buffer.  The transfer may