DMA: shdma: switch all __iomem pointers to void

In the shdma driver __iomem pointers are used to point to hardware
registers.  Using typed pointers like "u32 __iomem *" in this case is
inconvenient, because then offsets, added to such pointers, have to be
devided by sizeof(u32) or similar. Switch the driver to use void
pointers, which avoids this clumsiness.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

drivers/dma/sh/shdma.c

@@ -54,22 +54,22 @@ static void channel_clear(struct sh_dmae_chan *sh_dc)
 	struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
 
 	__raw_writel(0, shdev->chan_reg +
-		shdev->pdata->channel[sh_dc->shdma_chan.id].chclr_offset / sizeof(u32));
+		shdev->pdata->channel[sh_dc->shdma_chan.id].chclr_offset);
 }
 
 static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
 {
-	__raw_writel(data, sh_dc->base + reg / sizeof(u32));
+	__raw_writel(data, sh_dc->base + reg);
 }
 
 static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
 {
-	return __raw_readl(sh_dc->base + reg / sizeof(u32));
+	return __raw_readl(sh_dc->base + reg);
 }
 
 static u16 dmaor_read(struct sh_dmae_device *shdev)
 {
-	u32 __iomem *addr = shdev->chan_reg + DMAOR / sizeof(u32);
+	void __iomem *addr = shdev->chan_reg + DMAOR;
 
 	if (shdev->pdata->dmaor_is_32bit)
 		return __raw_readl(addr);
@@ -79,7 +79,7 @@ static u16 dmaor_read(struct sh_dmae_device *shdev)
 
 static void dmaor_write(struct sh_dmae_device *shdev, u16 data)
 {
-	u32 __iomem *addr = shdev->chan_reg + DMAOR / sizeof(u32);
+	void __iomem *addr = shdev->chan_reg + DMAOR;
 
 	if (shdev->pdata->dmaor_is_32bit)
 		__raw_writel(data, addr);
@@ -91,14 +91,14 @@ static void chcr_write(struct sh_dmae_chan *sh_dc, u32 data)
 {
 	struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
 
-	__raw_writel(data, sh_dc->base + shdev->chcr_offset / sizeof(u32));
+	__raw_writel(data, sh_dc->base + shdev->chcr_offset);
 }
 
 static u32 chcr_read(struct sh_dmae_chan *sh_dc)
 {
 	struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
 
-	return __raw_readl(sh_dc->base + shdev->chcr_offset / sizeof(u32));
+	return __raw_readl(sh_dc->base + shdev->chcr_offset);
 }
 
 /*
@@ -242,7 +242,7 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
 	struct sh_dmae_device *shdev = to_sh_dev(sh_chan);
 	struct sh_dmae_pdata *pdata = shdev->pdata;
 	const struct sh_dmae_channel *chan_pdata = &pdata->channel[sh_chan->shdma_chan.id];
-	u16 __iomem *addr = shdev->dmars;
+	void __iomem *addr = shdev->dmars;
 	unsigned int shift = chan_pdata->dmars_bit;
 
 	if (dmae_is_busy(sh_chan))
@@ -253,8 +253,8 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
 
 	/* in the case of a missing DMARS resource use first memory window */
 	if (!addr)
-		addr = (u16 __iomem *)shdev->chan_reg;
-	addr += chan_pdata->dmars / sizeof(u16);
+		addr = shdev->chan_reg;
+	addr += chan_pdata->dmars;
 
 	__raw_writew((__raw_readw(addr) & (0xff00 >> shift)) | (val << shift),
 		     addr);
@@ -517,7 +517,7 @@ static int sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
 
 	shdma_chan_probe(sdev, schan, id);
 
-	sh_chan->base = shdev->chan_reg + chan_pdata->offset / sizeof(u32);
+	sh_chan->base = shdev->chan_reg + chan_pdata->offset;
 
 	/* set up channel irq */
 	if (pdev->id >= 0)

drivers/dma/sh/shdma.h

@@ -28,7 +28,7 @@ struct sh_dmae_chan {
 	struct shdma_chan shdma_chan;
 	const struct sh_dmae_slave_config *config; /* Slave DMA configuration */
 	int xmit_shift;			/* log_2(bytes_per_xfer) */
-	u32 __iomem *base;
+	void __iomem *base;
 	char dev_id[16];		/* unique name per DMAC of channel */
 	int pm_error;
 };
@@ -38,8 +38,8 @@ struct sh_dmae_device {
 	struct sh_dmae_chan *chan[SH_DMAE_MAX_CHANNELS];
 	struct sh_dmae_pdata *pdata;
 	struct list_head node;
-	u32 __iomem *chan_reg;
-	u16 __iomem *dmars;
+	void __iomem *chan_reg;
+	void __iomem *dmars;
 	unsigned int chcr_offset;
 	u32 chcr_ie_bit;
 };