Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:
 - add TQ-Systems TQMX86 watchdog driver
 - add Qualcomm PM8916 watchdog driver
 - w83627hf_wdt: add quirk for Inves system
 - renesas_wdt: several improvements and document r8a774c0 support
 - mena21_wdt, mtx-1: Convert to use GPIO descriptor
 - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
 - documentation: add PM usage and kernel-api: don't reference removed functions
 - update bindings for MT7629 SoC
 - several small fixes

* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
  watchdog: tqmx86: Add watchdog driver for the IO controller
  dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
  watchdog: docs: kernel-api: don't reference removed functions
  watchdog: add documentation for PM usage
  watchdog: mtx-1: Convert to use GPIO descriptor
  watchdog: mena21_wdt: Convert to GPIO descriptors
  dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
  watchdog: Add pm8916 watchdog driver
  dt-bindings: watchdog: update bindings for MT7629 SoC
  watchdog: renesas_wdt: don't keep timer value during suspend/resume
  watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
  watchdog: asm9260_wdt: make array mode_name static, shrinks object size
  watchdog/hpwdt: Update driver version.
  watchdog/hpwdt: Do not claim unsupported hardware
  watchdog/hpwdt: Exclude via blacklist
  Watchdog: remove outdated comment
  watchdog: w83627hf_wdt: Add quirk for Inves system
  watchdog: cpwd: add of_node_put()
  watchdog: renesas_wdt: don't set divider while watchdog is running
  ...

Documentation/devicetree/bindings/watchdog/mtk-wdt.txt

@@ -8,6 +8,7 @@ Required properties:
 	"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
+	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
 
 - reg : Specifies base physical address and size of the registers.
 

Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.txt

+QCOM PM8916 watchdog timer controller
+
+This pm8916 watchdog timer controller must be under pm8916-pon node.
+
+Required properties:
+- compatible: should be "qcom,pm8916-wdt"
+
+Optional properties :
+- interrupts : Watchdog pre-timeout (bark) interrupt.
+- timeout-sec : Watchdog timeout value in seconds.
+
+Example:
+
+	pm8916_0: pm8916@0 {
+		compatible = "qcom,pm8916", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+
+			watchdog {
+				compatible = "qcom,pm8916-wdt";
+				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
+				timeout-sec = <10>;
+			};
+		};
+	};

Documentation/devicetree/bindings/watchdog/renesas-wdt.txt

@@ -9,6 +9,7 @@ Required properties:
 		 - "renesas,r8a7744-wdt" (RZ/G1N)
 		 - "renesas,r8a7745-wdt" (RZ/G1E)
 		 - "renesas,r8a774a1-wdt" (RZ/G2M)
+		 - "renesas,r8a774c0-wdt" (RZ/G2E)
 	         - "renesas,r8a7790-wdt" (R-Car H2)
 	         - "renesas,r8a7791-wdt" (R-Car M2-W)
 	         - "renesas,r8a7792-wdt" (R-Car V2H)

Documentation/watchdog/watchdog-kernel-api.txt

@@ -128,8 +128,6 @@ struct watchdog_ops {
 	int (*set_pretimeout)(struct watchdog_device *, unsigned int);
 	unsigned int (*get_timeleft)(struct watchdog_device *);
 	int (*restart)(struct watchdog_device *);
-	void (*ref)(struct watchdog_device *) __deprecated;
-	void (*unref)(struct watchdog_device *) __deprecated;
 	long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long);
 };
 
@@ -218,8 +216,6 @@ they are supported. These optional routines/operations are:
   if a command is not supported. The parameters that are passed to the ioctl
   call are: watchdog_device, cmd and arg.
 
-The 'ref' and 'unref' operations are no longer used and deprecated.
-
 The status bits should (preferably) be set with the set_bit and clear_bit alike
 bit-operations. The status bits that are defined are:
 * WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device

Documentation/watchdog/watchdog-pm.txt

+The Linux WatchDog Timer Power Management Guide
+===============================================
+Last reviewed: 17-Dec-2018
+
+Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+Introduction
+------------
+This document states rules about watchdog devices and their power management
+handling to ensure a uniform behaviour for Linux systems.
+
+
+Ping on resume
+--------------
+On resume, a watchdog timer shall be reset to its selected value to give
+userspace enough time to resume. [1] [2]
+
+[1] https://patchwork.kernel.org/patch/10252209/
+[2] https://patchwork.kernel.org/patch/10711625/

arch/mips/alchemy/board-mtx1.c

@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mtd/partitions.h>
@@ -130,20 +131,18 @@ static struct platform_device mtx1_button = {
 	}
 };
 
-static struct resource mtx1_wdt_res[] = {
-	[0] = {
-		.start	= 215,
-		.end	= 215,
-		.name	= "mtx1-wdt-gpio",
-		.flags	= IORESOURCE_IRQ,
-	}
+static struct gpiod_lookup_table mtx1_wdt_gpio_table = {
+	.dev_id = "mtx1-wdt.0",
+	.table = {
+		/* Global number 215 is offset 15 on Alchemy GPIO 2 */
+		GPIO_LOOKUP("alchemy-gpio2", 15, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
 };
 
 static struct platform_device mtx1_wdt = {
 	.name = "mtx1-wdt",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(mtx1_wdt_res),
-	.resource = mtx1_wdt_res,
 };
 
 static const struct gpio_led default_leds[] = {
@@ -310,6 +309,7 @@ static int __init mtx1_register_devices(void)
 	}
 	gpio_direction_input(mtx1_gpio_button[0].gpio);
 out:
+	gpiod_add_lookup_table(&mtx1_wdt_gpio_table);
 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
 arch_initcall(mtx1_register_devices);

drivers/watchdog/Kconfig

@@ -538,7 +538,7 @@ config COH901327_WATCHDOG
 config NPCM7XX_WATCHDOG
 	bool "Nuvoton NPCM750 watchdog"
 	depends on ARCH_NPCM || COMPILE_TEST
-	default y if ARCH_NPCM750
+	default y if ARCH_NPCM7XX
 	select WATCHDOG_CORE
 	help
 	  Say Y here to include Watchdog timer support for the
@@ -847,6 +847,14 @@ config SPRD_WATCHDOG
 	  Say Y here to include watchdog timer supported
 	  by Spreadtrum system.
 
+config PM8916_WATCHDOG
+	tristate "QCOM PM8916 pmic watchdog"
+	depends on OF && MFD_SPMI_PMIC
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include support watchdog timer embedded into the
+	  pm8916 module.
+
 # X86 (i386 + ia64 + x86_64) Architecture
 
 config ACQUIRE_WDT
@@ -1308,6 +1316,18 @@ config SMSC37B787_WDT
 
 	  Most people will say N.
 
+config TQMX86_WDT
+	tristate "TQ-Systems TQMX86 Watchdog Timer"
+	depends on X86
+	help
+	This is the driver for the hardware watchdog timer in the TQMX86 IO
+	controller found on some of their ComExpress Modules.
+
+	To compile this driver as a module, choose M here; the module
+	will be called tqmx86_wdt.
+
+	Most people will say N.
+
 config VIA_WDT
 	tristate "VIA Watchdog Timer"
 	depends on X86 && PCI

drivers/watchdog/Makefile

@@ -92,6 +92,7 @@ obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
 obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
 obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
 obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
+obj-$(CONFIG_PM8916_WATCHDOG) += pm8916_wdt.o
 
 # X86 (i386 + ia64 + x86_64) Architecture
 obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
@@ -129,6 +130,7 @@ obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
 obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
 obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o
 obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
+obj-$(CONFIG_TQMX86_WDT) += tqmx86_wdt.o
 obj-$(CONFIG_VIA_WDT) += via_wdt.o
 obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
 obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o

drivers/watchdog/asm9260_wdt.c

@@ -278,7 +278,7 @@ static int asm9260_wdt_probe(struct platform_device *pdev)
 	struct watchdog_device *wdd;
 	struct resource *res;
 	int ret;
-	const char * const mode_name[] = { "hw", "sw", "debug", };
+	static const char * const mode_name[] = { "hw", "sw", "debug", };
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct asm9260_wdt_priv),
 			    GFP_KERNEL);

drivers/watchdog/bcm_kona_wdt.c

@@ -90,7 +90,7 @@ static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset)
 
 #ifdef CONFIG_BCM_KONA_WDT_DEBUG
 
-static int bcm_kona_wdt_dbg_show(struct seq_file *s, void *data)
+static int bcm_kona_show(struct seq_file *s, void *data)
 {
 	int ctl_val, cur_val;
 	unsigned long flags;
@@ -130,17 +130,7 @@ static int bcm_kona_wdt_dbg_show(struct seq_file *s, void *data)
 	return 0;
 }
 
-static int bcm_kona_dbg_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, bcm_kona_wdt_dbg_show, inode->i_private);
-}
-
-static const struct file_operations bcm_kona_dbg_operations = {
-	.open		= bcm_kona_dbg_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(bcm_kona);
 
 static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
 {
@@ -157,7 +147,7 @@ static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
 		return;
 
 	if (debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt,
-				&bcm_kona_dbg_operations))
+				&bcm_kona_fops))
 		wdt->debugfs = dir;
 	else
 		debugfs_remove_recursive(dir);

drivers/watchdog/cpwd.c

@@ -570,6 +570,8 @@ static int cpwd_probe(struct platform_device *op)
 	if (str_prop)
 		p->timeout = simple_strtoul(str_prop, NULL, 10);
 
+	of_node_put(options);
+
 	/* CP1400s seem to have broken PLD implementations-- the
 	 * interrupt_mask register cannot be written, so no timer
 	 * interrupts can be masked within the PLD.

drivers/watchdog/hpwdt.c

@@ -26,7 +26,7 @@
 #include <linux/watchdog.h>
 #include <asm/nmi.h>
 
-#define HPWDT_VERSION			"2.0.1"
+#define HPWDT_VERSION			"2.0.2"
 #define SECS_TO_TICKS(secs)		((secs) * 1000 / 128)
 #define TICKS_TO_SECS(ticks)		((ticks) * 128 / 1000)
 #define HPWDT_MAX_TIMER			TICKS_TO_SECS(65535)
@@ -50,6 +50,11 @@ static const struct pci_device_id hpwdt_devices[] = {
 };
 MODULE_DEVICE_TABLE(pci, hpwdt_devices);
 
+static const struct pci_device_id hpwdt_blacklist[] = {
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_HP, 0x3306, PCI_VENDOR_ID_HP, 0x1979) }, /* auxilary iLO */
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_HP, 0x3306, PCI_VENDOR_ID_HP_3PAR, 0x0289) },  /* CL */
+	{0},			/* terminate list */
+};
 
 /*
  *	Watchdog operations
@@ -274,12 +279,10 @@ static int hpwdt_init_one(struct pci_dev *dev,
 		return -ENODEV;
 	}
 
-	/*
-	 * Ignore all auxilary iLO devices with the following PCI ID
-	 */
-	if (dev->subsystem_vendor == PCI_VENDOR_ID_HP &&
-	    dev->subsystem_device == 0x1979)
+	if (pci_match_id(hpwdt_blacklist, dev)) {
+		dev_dbg(&dev->dev, "Not supported on this device\n");
 		return -ENODEV;
+	}
 
 	if (pci_enable_device(dev)) {
 		dev_warn(&dev->dev,

drivers/watchdog/ie6xx_wdt.c

@@ -193,7 +193,7 @@ static struct watchdog_device ie6xx_wdt_dev = {
 
 #ifdef CONFIG_DEBUG_FS
 
-static int ie6xx_wdt_dbg_show(struct seq_file *s, void *unused)
+static int ie6xx_wdt_show(struct seq_file *s, void *unused)
 {
 	seq_printf(s, "PV1   = 0x%08x\n",
 		inl(ie6xx_wdt_data.sch_wdtba + PV1));
@@ -212,23 +212,13 @@ static int ie6xx_wdt_dbg_show(struct seq_file *s, void *unused)
 	return 0;
 }
 
-static int ie6xx_wdt_dbg_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ie6xx_wdt_dbg_show, NULL);
-}
-
-static const struct file_operations ie6xx_wdt_dbg_operations = {
-	.open		= ie6xx_wdt_dbg_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(ie6xx_wdt);
 
 static void ie6xx_wdt_debugfs_init(void)
 {
 	/* /sys/kernel/debug/ie6xx_wdt */
 	ie6xx_wdt_data.debugfs = debugfs_create_file("ie6xx_wdt",
-		S_IFREG | S_IRUGO, NULL, NULL, &ie6xx_wdt_dbg_operations);
+		S_IFREG | S_IRUGO, NULL, NULL, &ie6xx_wdt_fops);
 }
 
 static void ie6xx_wdt_debugfs_exit(void)

drivers/watchdog/mena21_wdt.c

@@ -13,10 +13,10 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
+#include <linux/of.h>
 
 #define NUM_GPIOS 6
 
@@ -31,7 +31,7 @@ enum a21_wdt_gpios {
 
 struct a21_wdt_drv {
 	struct watchdog_device wdt;
-	unsigned gpios[NUM_GPIOS];
+	struct gpio_desc *gpios[NUM_GPIOS];
 };
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -43,9 +43,9 @@ static unsigned int a21_wdt_get_bootstatus(struct a21_wdt_drv *drv)
 {
 	int reset = 0;
 
-	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0;
-	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0;
-	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0;
+	reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0;
+	reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0;
+	reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0;
 
 	return reset;
 }
@@ -54,7 +54,7 @@ static int a21_wdt_start(struct watchdog_device *wdt)
 {
 	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
 
-	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 1);
+	gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 1);
 
 	return 0;
 }
@@ -63,7 +63,7 @@ static int a21_wdt_stop(struct watchdog_device *wdt)
 {
 	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
 
-	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
+	gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0);
 
 	return 0;
 }
@@ -72,9 +72,9 @@ static int a21_wdt_ping(struct watchdog_device *wdt)
 {
 	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
 
-	gpio_set_value(drv->gpios[GPIO_WD_TRIG], 0);
+	gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 0);
 	ndelay(10);
-	gpio_set_value(drv->gpios[GPIO_WD_TRIG], 1);
+	gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 1);
 
 	return 0;
 }
@@ -96,9 +96,9 @@ static int a21_wdt_set_timeout(struct watchdog_device *wdt,
 	}
 
 	if (timeout == 1)
-		gpio_set_value(drv->gpios[GPIO_WD_FAST], 1);
+		gpiod_set_value(drv->gpios[GPIO_WD_FAST], 1);
 	else
-		gpio_set_value(drv->gpios[GPIO_WD_FAST], 0);
+		gpiod_set_value(drv->gpios[GPIO_WD_FAST], 0);
 
 	wdt->timeout = timeout;
 
@@ -127,7 +127,6 @@ static struct watchdog_device a21_wdt = {
 
 static int a21_wdt_probe(struct platform_device *pdev)
 {
-	struct device_node *node;
 	struct a21_wdt_drv *drv;
 	unsigned int reset = 0;
 	int num_gpios;
@@ -138,40 +137,40 @@ static int a21_wdt_probe(struct platform_device *pdev)
 	if (!drv)
 		return -ENOMEM;
 
-	/* Fill GPIO pin array */
-	node = pdev->dev.of_node;
-
-	num_gpios = of_gpio_count(node);
+	num_gpios = gpiod_count(&pdev->dev, NULL);
 	if (num_gpios != NUM_GPIOS) {
 		dev_err(&pdev->dev, "gpios DT property wrong, got %d want %d",
 			num_gpios, NUM_GPIOS);
 		return -ENODEV;
 	}
 
-	for (i = 0; i < num_gpios; i++) {
-		int val;
-
-		val = of_get_gpio(node, i);
-		if (val < 0)
-			return val;
-
-		drv->gpios[i] = val;
-	}
-
 	/* Request the used GPIOs */
 	for (i = 0; i < num_gpios; i++) {
-		ret = devm_gpio_request(&pdev->dev, drv->gpios[i],
-					"MEN A21 Watchdog");
-		if (ret)
-			return ret;
+		enum gpiod_flags gflags;
 
 		if (i < GPIO_WD_RST0)
-			ret = gpio_direction_output(drv->gpios[i],
-						gpio_get_value(drv->gpios[i]));
-		else		/* GPIO_WD_RST[0..2] are inputs */
-			ret = gpio_direction_input(drv->gpios[i]);
-		if (ret)
+			gflags = GPIOD_ASIS;
+		else
+			gflags = GPIOD_IN;
+		drv->gpios[i] = devm_gpiod_get_index(&pdev->dev, NULL, i,
+						     gflags);
+		if (IS_ERR(drv->gpios[i])) {
+			ret = PTR_ERR(drv->gpios[i]);
 			return ret;
+		}
+
+		gpiod_set_consumer_name(drv->gpios[i], "MEN A21 Watchdog");
+
+		/*
+		 * Retrieve the initial value from the GPIOs that should be
+		 * output, then set up the line as output with that value.
+		 */
+		if (i < GPIO_WD_RST0) {
+			int val;
+
+			val = gpiod_get_value(drv->gpios[i]);
+			gpiod_direction_output(drv->gpios[i], val);
+		}
 	}
 
 	watchdog_init_timeout(&a21_wdt, 30, &pdev->dev);
@@ -207,7 +206,7 @@ static void a21_wdt_shutdown(struct platform_device *pdev)
 {
 	struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev);
 
-	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
+	gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0);
 }
 
 static const struct of_device_id a21_wdt_ids[] = {

drivers/watchdog/mtx-1_wdt.c

@@ -39,7 +39,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 
 #include <asm/mach-au1x00/au1000.h>
 
@@ -55,7 +55,7 @@ static struct {
 	int queue;
 	int default_ticks;
 	unsigned long inuse;
-	unsigned gpio;
+	struct gpio_desc *gpiod;
 	unsigned int gstate;
 } mtx1_wdt_device;
 
@@ -67,7 +67,7 @@ static void mtx1_wdt_trigger(struct timer_list *unused)
 
 	/* toggle wdt gpio */
 	mtx1_wdt_device.gstate = !mtx1_wdt_device.gstate;
-	gpio_set_value(mtx1_wdt_device.gpio, mtx1_wdt_device.gstate);
+	gpiod_set_value(mtx1_wdt_device.gpiod, mtx1_wdt_device.gstate);
 
 	if (mtx1_wdt_device.queue && ticks)
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
@@ -90,7 +90,7 @@ static void mtx1_wdt_start(void)
 	if (!mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 1;
 		mtx1_wdt_device.gstate = 1;
-		gpio_set_value(mtx1_wdt_device.gpio, 1);
+		gpiod_set_value(mtx1_wdt_device.gpiod, 1);
 		mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL);
 	}
 	mtx1_wdt_device.running++;
@@ -105,7 +105,7 @@ static int mtx1_wdt_stop(void)
 	if (mtx1_wdt_device.queue) {
 		mtx1_wdt_device.queue = 0;
 		mtx1_wdt_device.gstate = 0;
-		gpio_set_value(mtx1_wdt_device.gpio, 0);
+		gpiod_set_value(mtx1_wdt_device.gpiod, 0);
 	}
 	ticks = mtx1_wdt_device.default_ticks;
 	spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags);
@@ -198,12 +198,11 @@ static int mtx1_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	mtx1_wdt_device.gpio = pdev->resource[0].start;
-	ret = devm_gpio_request_one(&pdev->dev, mtx1_wdt_device.gpio,
-				GPIOF_OUT_INIT_HIGH, "mtx1-wdt");
-	if (ret < 0) {
+	mtx1_wdt_device.gpiod = devm_gpiod_get(&pdev->dev,
+					       NULL, GPIOD_OUT_HIGH);
+	if (IS_ERR(mtx1_wdt_device.gpiod)) {
 		dev_err(&pdev->dev, "failed to request gpio");
-		return ret;
+		return PTR_ERR(mtx1_wdt_device.gpiod);
 	}
 
 	spin_lock_init(&mtx1_wdt_device.lock);

drivers/watchdog/pm8916_wdt.c

+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/property.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+#define PON_INT_RT_STS			0x10
+#define PMIC_WD_BARK_STS_BIT		BIT(6)
+
+#define PON_PMIC_WD_RESET_S1_TIMER	0x54
+#define PON_PMIC_WD_RESET_S2_TIMER	0x55
+
+#define PON_PMIC_WD_RESET_S2_CTL	0x56
+#define RESET_TYPE_WARM			0x01
+#define RESET_TYPE_SHUTDOWN		0x04
+#define RESET_TYPE_HARD			0x07
+
+#define PON_PMIC_WD_RESET_S2_CTL2	0x57
+#define S2_RESET_EN_BIT			BIT(7)
+
+#define PON_PMIC_WD_RESET_PET		0x58
+#define WATCHDOG_PET_BIT		BIT(0)
+
+#define PM8916_WDT_DEFAULT_TIMEOUT	32
+#define PM8916_WDT_MIN_TIMEOUT		1
+#define PM8916_WDT_MAX_TIMEOUT		127
+
+struct pm8916_wdt {
+	struct regmap *regmap;
+	struct watchdog_device wdev;
+	u32 baseaddr;
+};
+
+static int pm8916_wdt_start(struct watchdog_device *wdev)
+{
+	struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev);
+
+	return regmap_update_bits(wdt->regmap,
+				  wdt->baseaddr + PON_PMIC_WD_RESET_S2_CTL2,
+				  S2_RESET_EN_BIT, S2_RESET_EN_BIT);
+}
+
+static int pm8916_wdt_stop(struct watchdog_device *wdev)
+{
+	struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev);
+
+	return regmap_update_bits(wdt->regmap,
+				  wdt->baseaddr + PON_PMIC_WD_RESET_S2_CTL2,
+				  S2_RESET_EN_BIT, 0);
+}
+
+static int pm8916_wdt_ping(struct watchdog_device *wdev)
+{
+	struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev);
+
+	return regmap_update_bits(wdt->regmap,
+				  wdt->baseaddr + PON_PMIC_WD_RESET_PET,
+				  WATCHDOG_PET_BIT, WATCHDOG_PET_BIT);
+}
+
+static int pm8916_wdt_configure_timers(struct watchdog_device *wdev)
+{
+	struct pm8916_wdt *wdt = watchdog_get_drvdata(wdev);
+	int err;
+
+	err = regmap_write(wdt->regmap,
+			   wdt->baseaddr + PON_PMIC_WD_RESET_S1_TIMER,
+			   wdev->timeout - wdev->pretimeout);
+	if (err)
+		return err;
+
+	return regmap_write(wdt->regmap,
+			    wdt->baseaddr + PON_PMIC_WD_RESET_S2_TIMER,
+			    wdev->pretimeout);
+}
+
+static int pm8916_wdt_set_timeout(struct watchdog_device *wdev,
+				  unsigned int timeout)
+{
+	wdev->timeout = timeout;
+
+	return pm8916_wdt_configure_timers(wdev);
+}
+
+static int pm8916_wdt_set_pretimeout(struct watchdog_device *wdev,
+				     unsigned int pretimeout)
+{
+	wdev->pretimeout = pretimeout;
+
+	return pm8916_wdt_configure_timers(wdev);
+}
+
+static irqreturn_t pm8916_wdt_isr(int irq, void *arg)
+{
+	struct pm8916_wdt *wdt = arg;
+	int err, sts;
+
+	err = regmap_read(wdt->regmap, wdt->baseaddr + PON_INT_RT_STS, &sts);
+	if (err)
+		return IRQ_HANDLED;
+
+	if (sts & PMIC_WD_BARK_STS_BIT)
+		watchdog_notify_pretimeout(&wdt->wdev);
+
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_info pm8916_wdt_ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "QCOM PM8916 PON WDT",
+};
+
+static const struct watchdog_info pm8916_wdt_pt_ident = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE |
+		   WDIOF_PRETIMEOUT,
+	.identity = "QCOM PM8916 PON WDT",
+};
+
+static const struct watchdog_ops pm8916_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = pm8916_wdt_start,
+	.stop = pm8916_wdt_stop,
+	.ping = pm8916_wdt_ping,
+	.set_timeout = pm8916_wdt_set_timeout,
+	.set_pretimeout = pm8916_wdt_set_pretimeout,
+};
+
+static int pm8916_wdt_probe(struct platform_device *pdev)
+{
+	struct pm8916_wdt *wdt;
+	struct device *parent;
+	int err, irq;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	parent = pdev->dev.parent;
+
+	/*
+	 * The pm8916-pon-wdt is a child of the pon device, which is a child
+	 * of the pm8916 mfd device. We want access to the pm8916 registers.
+	 * Retrieve regmap from pm8916 (parent->parent) and base address
+	 * from pm8916-pon (pon).
+	 */
+	wdt->regmap = dev_get_regmap(parent->parent, NULL);
+	if (!wdt->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	err = device_property_read_u32(parent, "reg", &wdt->baseaddr);
+	if (err) {
+		dev_err(&pdev->dev, "failed to get pm8916-pon address\n");
+		return err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq > 0) {
+		if (devm_request_irq(&pdev->dev, irq, pm8916_wdt_isr, 0,
+				     "pm8916_wdt", wdt))
+			irq = 0;
+	}
+
+	/* Configure watchdog to hard-reset mode */
+	err = regmap_write(wdt->regmap,
+			   wdt->baseaddr + PON_PMIC_WD_RESET_S2_CTL,
+			   RESET_TYPE_HARD);
+	if (err) {
+		dev_err(&pdev->dev, "failed configure watchdog\n");
+		return err;
+	}
+
+	wdt->wdev.info = (irq > 0) ? &pm8916_wdt_pt_ident : &pm8916_wdt_ident,
+	wdt->wdev.ops = &pm8916_wdt_ops,
+	wdt->wdev.parent = &pdev->dev;
+	wdt->wdev.min_timeout = PM8916_WDT_MIN_TIMEOUT;
+	wdt->wdev.max_timeout = PM8916_WDT_MAX_TIMEOUT;
+	wdt->wdev.timeout = PM8916_WDT_DEFAULT_TIMEOUT;
+	wdt->wdev.pretimeout = 0;
+	watchdog_set_drvdata(&wdt->wdev, wdt);
+
+	watchdog_init_timeout(&wdt->wdev, 0, &pdev->dev);
+	pm8916_wdt_configure_timers(&wdt->wdev);
+
+	return devm_watchdog_register_device(&pdev->dev, &wdt->wdev);
+}
+
+static const struct of_device_id pm8916_wdt_id_table[] = {
+	{ .compatible = "qcom,pm8916-wdt" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8916_wdt_id_table);
+
+static struct platform_driver pm8916_wdt_driver = {
+	.probe = pm8916_wdt_probe,
+	.driver = {
+		.name = "pm8916-wdt",
+		.of_match_table = of_match_ptr(pm8916_wdt_id_table),
+	},
+};
+module_platform_driver(pm8916_wdt_driver);
+
+MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm pm8916 watchdog driver");
+MODULE_LICENSE("GPL v2");

drivers/watchdog/renesas_wdt.c

@@ -48,7 +48,6 @@ struct rwdt_priv {
 	void __iomem *base;
 	struct watchdog_device wdev;
 	unsigned long clk_rate;
-	u16 time_left;
 	u8 cks;
 };
 
@@ -74,12 +73,17 @@ static int rwdt_init_timeout(struct watchdog_device *wdev)
 static int rwdt_start(struct watchdog_device *wdev)
 {
 	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
+	u8 val;
 
 	pm_runtime_get_sync(wdev->parent);
 
-	rwdt_write(priv, 0, RWTCSRB);
-	rwdt_write(priv, priv->cks, RWTCSRA);
+	/* Stop the timer before we modify any register */
+	val = readb_relaxed(priv->base + RWTCSRA) & ~RWTCSRA_TME;
+	rwdt_write(priv, val, RWTCSRA);
+
 	rwdt_init_timeout(wdev);
+	rwdt_write(priv, priv->cks, RWTCSRA);
+	rwdt_write(priv, 0, RWTCSRB);
 
 	while (readb_relaxed(priv->base + RWTCSRA) & RWTCSRA_WRFLG)
 		cpu_relax();
@@ -220,8 +224,8 @@ static int rwdt_probe(struct platform_device *pdev)
 		goto out_pm_disable;
 	}
 
-	priv->wdev.info = &rwdt_ident,
-	priv->wdev.ops = &rwdt_ops,
+	priv->wdev.info = &rwdt_ident;
+	priv->wdev.ops = &rwdt_ops;
 	priv->wdev.parent = &pdev->dev;
 	priv->wdev.min_timeout = 1;
 	priv->wdev.max_timeout = DIV_BY_CLKS_PER_SEC(priv, 65536);
@@ -263,10 +267,9 @@ static int __maybe_unused rwdt_suspend(struct device *dev)
 {
 	struct rwdt_priv *priv = dev_get_drvdata(dev);
 
-	if (watchdog_active(&priv->wdev)) {
-		priv->time_left = readw(priv->base + RWTCNT);
+	if (watchdog_active(&priv->wdev))
 		rwdt_stop(&priv->wdev);
-	}
+
 	return 0;
 }
 
@@ -274,10 +277,9 @@ static int __maybe_unused rwdt_resume(struct device *dev)
 {
 	struct rwdt_priv *priv = dev_get_drvdata(dev);
 
-	if (watchdog_active(&priv->wdev)) {
+	if (watchdog_active(&priv->wdev))
 		rwdt_start(&priv->wdev);
-		rwdt_write(priv, priv->time_left, RWTCNT);
-	}
+
 	return 0;
 }
 

drivers/watchdog/tqmx86_wdt.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Watchdog driver for TQMx86 PLD.
+ *
+ * The watchdog supports power of 2 timeouts from 1 to 4096sec.
+ * Once started, it cannot be stopped.
+ *
+ * Based on the vendor code written by Vadim V.Vlasov
+ * <vvlasov@dev.rtsoft.ru>
+ */
+
+#include <linux/io.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+#include <linux/watchdog.h>
+
+/* default timeout (secs) */
+#define WDT_TIMEOUT 32
+
+static unsigned int timeout;
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. (1<=timeout<=4096, default="
+				__MODULE_STRING(WDT_TIMEOUT) ")");
+struct tqmx86_wdt {
+	struct watchdog_device wdd;
+	void __iomem *io_base;
+};
+
+#define TQMX86_WDCFG	0x00 /* Watchdog Configuration Register */
+#define TQMX86_WDCS	0x01 /* Watchdog Config/Status Register */
+
+static int tqmx86_wdt_start(struct watchdog_device *wdd)
+{
+	struct tqmx86_wdt *priv = watchdog_get_drvdata(wdd);
+
+	iowrite8(0x81, priv->io_base + TQMX86_WDCS);
+
+	return 0;
+}
+
+static int tqmx86_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
+{
+	struct tqmx86_wdt *priv = watchdog_get_drvdata(wdd);
+	u8 val;
+
+	t = roundup_pow_of_two(t);
+	val = ilog2(t) | 0x90;
+	val += 3; /* values 0,1,2 correspond to 0.125,0.25,0.5s timeouts */
+	iowrite8(val, priv->io_base + TQMX86_WDCFG);
+
+	wdd->timeout = t;
+
+	return 0;
+}
+
+static const struct watchdog_info tqmx86_wdt_info = {
+	.options	= WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING,
+	.identity	= "TQMx86 Watchdog",
+};
+
+static struct watchdog_ops tqmx86_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= tqmx86_wdt_start,
+	.set_timeout	= tqmx86_wdt_set_timeout,
+};
+
+static int tqmx86_wdt_probe(struct platform_device *pdev)
+{
+	struct tqmx86_wdt *priv;
+	struct resource *res;
+	int err;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (IS_ERR(res))
+		return PTR_ERR(res);
+
+	priv->io_base = devm_ioport_map(&pdev->dev, res->start,
+					resource_size(res));
+	if (IS_ERR(priv->io_base))
+		return PTR_ERR(priv->io_base);
+
+	watchdog_set_drvdata(&priv->wdd, priv);
+
+	priv->wdd.parent = &pdev->dev;
+	priv->wdd.info = &tqmx86_wdt_info;
+	priv->wdd.ops = &tqmx86_wdt_ops;
+	priv->wdd.min_timeout = 1;
+	priv->wdd.max_timeout = 4096;
+	priv->wdd.max_hw_heartbeat_ms = 4096*1000;
+	priv->wdd.timeout = WDT_TIMEOUT;
+
+	watchdog_init_timeout(&priv->wdd, timeout, &pdev->dev);
+	watchdog_set_nowayout(&priv->wdd, WATCHDOG_NOWAYOUT);
+
+	tqmx86_wdt_set_timeout(&priv->wdd, priv->wdd.timeout);
+
+	err = devm_watchdog_register_device(&pdev->dev, &priv->wdd);
+	if (err)
+		return err;
+
+	dev_info(&pdev->dev, "TQMx86 watchdog\n");
+
+	return 0;
+}
+
+static struct platform_driver tqmx86_wdt_driver = {
+	.driver		= {
+		.name	= "tqmx86-wdt",
+	},
+	.probe		= tqmx86_wdt_probe,
+};
+
+module_platform_driver(tqmx86_wdt_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("TQMx86 Watchdog");
+MODULE_ALIAS("platform:tqmx86-wdt");
+MODULE_LICENSE("GPL");

drivers/watchdog/w83627hf_wdt.c

@@ -38,6 +38,7 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/dmi.h>
 
 #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
 #define WATCHDOG_TIMEOUT 60		/* 60 sec default timeout */
@@ -46,6 +47,8 @@ static int wdt_io;
 static int cr_wdt_timeout;	/* WDT timeout register */
 static int cr_wdt_control;	/* WDT control register */
 static int cr_wdt_csr;		/* WDT control & status register */
+static int wdt_cfg_enter = 0x87;/* key to unlock configuration space */
+static int wdt_cfg_leave = 0xAA;/* key to lock configuration space */
 
 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
 	     w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
@@ -130,8 +133,8 @@ static int superio_enter(void)
 	if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
 		return -EBUSY;
 
-	outb_p(0x87, WDT_EFER); /* Enter extended function mode */
-	outb_p(0x87, WDT_EFER); /* Again according to manual */
+	outb_p(wdt_cfg_enter, WDT_EFER); /* Enter extended function mode */
+	outb_p(wdt_cfg_enter, WDT_EFER); /* Again according to manual */
 
 	return 0;
 }
@@ -143,7 +146,7 @@ static void superio_select(int ld)
 
 static void superio_exit(void)
 {
-	outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
+	outb_p(wdt_cfg_leave, WDT_EFER); /* Leave extended function mode */
 	release_region(wdt_io, 2);
 }
 
@@ -430,6 +433,32 @@ static int wdt_find(int addr)
 	return ret;
 }
 
+/*
+ * On some systems, the NCT6791D comes with a companion chip and the
+ * watchdog function is in this companion chip. We must use a different
+ * unlocking sequence to access the companion chip.
+ */
+static int __init wdt_use_alt_key(const struct dmi_system_id *d)
+{
+	wdt_cfg_enter = 0x88;
+	wdt_cfg_leave = 0xBB;
+
+	return 0;
+}
+
+static const struct dmi_system_id wdt_dmi_table[] __initconst = {
+	{
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "INVES"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CTS"),
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "INVES"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "SHARKBAY"),
+		},
+		.callback = wdt_use_alt_key,
+	},
+	{}
+};
+
 static int __init wdt_init(void)
 {
 	int ret;
@@ -459,6 +488,9 @@ static int __init wdt_init(void)
 		"NCT6102",
 	};
 
+	/* Apply system-specific quirks */
+	dmi_check_system(wdt_dmi_table);
+
 	wdt_io = 0x2e;
 	chip = wdt_find(0x2e);
 	if (chip < 0) {

include/linux/watchdog.h

@@ -90,9 +90,6 @@ struct watchdog_ops {
  *
  * The driver-data field may not be accessed directly. It must be accessed
  * via the watchdog_set_drvdata and watchdog_get_drvdata helpers.
- *
- * The lock field is for watchdog core internal use only and should not be
- * touched.
  */
 struct watchdog_device {
 	int id;