Skip to content

L
linux
Commit 115588bf authored by Nicolas Saenz Julienne's avatar Nicolas Saenz Julienne Committed by Greg Kroah-Hartman
Browse files
Options

staging: vc04_services: Get rid of vchi_cfg.h 

Nothing in it is being used.
Signed-off-by: default avatarNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200629150945.10720-18-nsaenzjulienne@suse.deSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7bfb15cc
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 239 deletions
drivers/staging/vc04_services/interface/vchi/vchi.h
View file @ 115588bf
......@@ -4,7 +4,6 @@
#ifndef VCHI_H_
#define VCHI_H_
#include "vchi_cfg.h"
#include "vchi_common.h"
/******************************************************************************
......
drivers/staging/vc04_services/interface/vchi/vchi_cfg.h deleted 100644 → 0
View file @ 7bfb15cc
/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/* Copyright (c) 2010-2012 Broadcom. All rights reserved. */
#ifndef VCHI_CFG_H_
#define VCHI_CFG_H_
/*******************************************************************************
* Defines in this first section are part of the VCHI API and may be examined by
* VCHI services.
******************************************************************************/
/*
* Required alignment of base addresses for bulk transfer, if unaligned
* transfers are not enabled
* Really determined by the message driver, and should be available from
* a run-time call.
*/
#ifndef VCHI_BULK_ALIGN
# if __VCCOREVER__ >= 0x04000000
# define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans
# else
# define VCHI_BULK_ALIGN 16
# endif
#endif
/*
* Required length multiple for bulk transfers, if unaligned transfers are
* not enabled
* May be less than or greater than VCHI_BULK_ALIGN
* Really determined by the message driver, and should be available from
* a run-time call.
*/
#ifndef VCHI_BULK_GRANULARITY
# if __VCCOREVER__ >= 0x04000000
# define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans
# else
# define VCHI_BULK_GRANULARITY 16
# endif
#endif
/* The largest possible message to be queued with vchi_msg_queue. */
#ifndef VCHI_MAX_MSG_SIZE
# if defined VCHI_LOCAL_HOST_PORT
# define VCHI_MAX_MSG_SIZE 16384 // makes file transfers fast, but should they be using bulk?
# else
# define VCHI_MAX_MSG_SIZE 4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!!
# endif
#endif
/******************************************************************************
* Defines below are system configuration options, and should not be used by
* VCHI services.
******************************************************************************/
/*
* How many connections can we support? A localhost implementation uses
* 2 connections, 1 for host-app, 1 for VMCS, and these are hooked together
* by a loopback MPHI VCFW driver.
*/
#ifndef VCHI_MAX_NUM_CONNECTIONS
# define VCHI_MAX_NUM_CONNECTIONS 3
#endif
/*
* How many services can we open per connection? Extending this doesn't cost
* processing time, just a small amount of static memory.
*/
#ifndef VCHI_MAX_SERVICES_PER_CONNECTION
# define VCHI_MAX_SERVICES_PER_CONNECTION 36
#endif
/* Adjust if using a message driver that supports more logical TX channels */
#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION
# define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels
#endif
/* Adjust if using a message driver that supports more logical RX channels */
#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION
# define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI
#endif
/*
* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the
* effective receive queue space, less message headers.
*/
#ifndef VCHI_NUM_READ_SLOTS
# if defined(VCHI_LOCAL_HOST_PORT)
# define VCHI_NUM_READ_SLOTS 4
# else
# define VCHI_NUM_READ_SLOTS 48
# endif
#endif
/*
* Do we utilise overrun facility for receive message slots? Can aid peer
* transmit performance. Only define on VideoCore end, talking to host.
*/
//#define VCHI_MSG_RX_OVERRUN
/*
* How many transmit slots do we use. Generally don't need many,
* as the hardware driver underneath VCHI will usually have its own buffering.
*/
#ifndef VCHI_NUM_WRITE_SLOTS
# define VCHI_NUM_WRITE_SLOTS 4
#endif
/*
* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or
* more slots, then it's taking up too much buffer space,
* and the peer service will be told to stop transmitting with an XOFF message.
* For this to be effective, the VCHI_NUM_READ_SLOTS needs to be considerably
* bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency is too high.
*/
#ifndef VCHI_XOFF_THRESHOLD
# define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2)
#endif
/*
* After we've sent an XOFF, the peer will be told to resume transmission
* once the local service has dequeued/released enough messages that it's now
* occupying VCHI_XON_THRESHOLD slots or fewer.
*/
#ifndef VCHI_XON_THRESHOLD
# define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4)
#endif
/*
* A size below which a bulk transfer omits the handshake completely and always
* goes via the message channel, if bulk auxiliary is being sent on that
* service. (The user can guarantee this by enabling unaligned transmits).
* Not API.
*/
#ifndef VCHI_MIN_BULK_SIZE
# define VCHI_MIN_BULK_SIZE (VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096)
#endif
/*
* Maximum size of bulk transmission chunks, for each interface type.
* A trade-off between speed and latency; the smaller the chunk size the better
* change of messages and other bulk transmissions getting in when big bulk
* transfers are happening. Set to 0 to not break transmissions into chunks.
*/
#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI
# define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024)
#endif
/*
* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec
* by using "JPEG8" mode with multiple-line frames. Only use if the receiver
* can cope.
*/
#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2
# define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0
#endif
/*
* How many TX messages can we have pending in our transmit slots.
* Once exhausted, vchi_msg_queue will be blocked.
*/
#ifndef VCHI_TX_MSG_QUEUE_SIZE
# define VCHI_TX_MSG_QUEUE_SIZE 256
#endif
/*
* How many RX messages can we have parsed in the receive slots. Once exhausted,
* parsing will be suspended until older messages are dequeued/released.
*/
#ifndef VCHI_RX_MSG_QUEUE_SIZE
# define VCHI_RX_MSG_QUEUE_SIZE 256
#endif
/*
* Really should be able to cope if we run out of received message descriptors,
* by suspending parsing as the comment above says, but we don't.
* This sweeps the issue under the carpet.
*/
#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE / 16 + 1) * VCHI_NUM_READ_SLOTS
# undef VCHI_RX_MSG_QUEUE_SIZE
# define VCHI_RX_MSG_QUEUE_SIZE ((VCHI_MAX_MSG_SIZE / 16 + 1) * VCHI_NUM_READ_SLOTS)
#endif
/*
* How many bulk transmits can we have pending. Once exhausted,
* vchi_bulk_queue_transmit will be blocked.
*/
#ifndef VCHI_TX_BULK_QUEUE_SIZE
# define VCHI_TX_BULK_QUEUE_SIZE 64
#endif
/*
* How many bulk receives can we have pending. Once exhausted,
*vchi_bulk_queue_receive will be blocked.
*/
#ifndef VCHI_RX_BULK_QUEUE_SIZE
# define VCHI_RX_BULK_QUEUE_SIZE 64
#endif
/*
* A limit on how many outstanding bulk requests we expect the peer to give us.
* If the peer asks for more than this, VCHI will fail and assert.
* The number is determined by the peer's hardware
* - it's the number of outstanding requests that can be queued
* on all bulk channels. VC3's MPHI peripheral allows 16.
*/
#ifndef VCHI_MAX_PEER_BULK_REQUESTS
# define VCHI_MAX_PEER_BULK_REQUESTS 32
#endif
/*
* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2
* transmitter on and off.
*/
/*#define VCHI_CCP2TX_MANUAL_POWER*/
#ifndef VCHI_CCP2TX_MANUAL_POWER
/*
* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state.
* Set negative for no IDLE.
*/
# ifndef VCHI_CCP2TX_IDLE_TIMEOUT
# define VCHI_CCP2TX_IDLE_TIMEOUT 5
# endif
/*
* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state.
* Set negative for no OFF.
*/
# ifndef VCHI_CCP2TX_OFF_TIMEOUT
# define VCHI_CCP2TX_OFF_TIMEOUT 1000
# endif
#endif /* VCHI_CCP2TX_MANUAL_POWER */
#endif /* VCHI_CFG_H_ */
/****************************** End of file **********************************/
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7