Commit 117401ee authored by Eric Dumazet's avatar Eric Dumazet Committed by David S. Miller

bnx2x: add TSO support for IPIP

bnx2x driver already handles TSO for GRE, current code
is the same for IPIP.

Performance results : (Note we are now limited by receiver,
as it does not support GRO for IPIP yet)

Before patch :

lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.00      7710.19   4.52     6.62     1.152   1.687

After patch :

lpq83:~# ./netperf -H 7.7.9.84 -Cc
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.9.84 () port 0 AF_INET
Recv   Send    Send                          Utilization       Service Demand
Socket Socket  Message  Elapsed              Send     Recv     Send    Recv
Size   Size    Size     Time     Throughput  local    remote   local   remote
bytes  bytes   bytes    secs.    10^6bits/s  % S      % S      us/KB   us/KB

 87380  16384  16384    10.00      8532.40   2.55     7.73     0.588   1.781
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cb32f511
......@@ -12260,10 +12260,12 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO |
NETIF_F_RXHASH | NETIF_F_HW_VLAN_CTAG_TX;
if (!CHIP_IS_E1x(bp)) {
dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL;
dev->hw_features |= NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_IPIP;
dev->hw_enc_features =
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG |
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 |
NETIF_F_GSO_IPIP |
NETIF_F_GSO_GRE | NETIF_F_GSO_UDP_TUNNEL;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment