Commit 11ad470c authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Maxime Ripard

dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU

The A83T clock control unit is a hybrid of some new style clock designs
from the A80, and old style layout from the other Allwinner SoCs.

Like the A80, the SoC does not have a low speed 32.768 kHz oscillator.
Unlike the A80, there is no clock input either. The only low speed clock
available is the internal oscillator which runs at around 16 MHz,
divided by 512, yielding a low speed clock around 31.250 kHz.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 1f6d640c
...@@ -6,6 +6,7 @@ Required properties : ...@@ -6,6 +6,7 @@ Required properties :
- "allwinner,sun6i-a31-ccu" - "allwinner,sun6i-a31-ccu"
- "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a23-ccu"
- "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-a83t-ccu"
- "allwinner,sun8i-h3-ccu" - "allwinner,sun8i-h3-ccu"
- "allwinner,sun8i-h3-r-ccu" - "allwinner,sun8i-h3-r-ccu"
- "allwinner,sun8i-v3s-ccu" - "allwinner,sun8i-v3s-ccu"
...@@ -18,6 +19,7 @@ Required properties : ...@@ -18,6 +19,7 @@ Required properties :
- clocks: phandle to the oscillators feeding the CCU. Two are needed: - clocks: phandle to the oscillators feeding the CCU. Two are needed:
- "hosc": the high frequency oscillator (usually at 24MHz) - "hosc": the high frequency oscillator (usually at 24MHz)
- "losc": the low frequency oscillator (usually at 32kHz) - "losc": the low frequency oscillator (usually at 32kHz)
On the A83T, this is the internal 16MHz oscillator divided by 512
- clock-names: Must contain the clock names described just above - clock-names: Must contain the clock names described just above
- #clock-cells : must contain 1 - #clock-cells : must contain 1
- #reset-cells : must contain 1 - #reset-cells : must contain 1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment