[NET] 8021Q: Fix whitespace errors.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/8021q/vlan.c

@@ -5,7 +5,7 @@
  * Authors:	Ben Greear <greearb@candelatech.com>
  *              Please send support related email to: vlan@scry.wanfear.com
  *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
- * 
+ *
  * Fixes:
  *              Fix for packet capture - Nick Eggleston <nick@dccinc.com>;
  *		Add HW acceleration hooks - David S. Miller <davem@redhat.com>;
@@ -72,7 +72,7 @@ static struct packet_type vlan_packet_type = {
 /*
  * Function vlan_proto_init (pro)
  *
- *    Initialize VLAN protocol layer, 
+ *    Initialize VLAN protocol layer,
  *
  */
 static int __init vlan_proto_init(void)
@@ -87,7 +87,7 @@ static int __init vlan_proto_init(void)
 	/* proc file system initialization */
 	err = vlan_proc_init();
 	if (err < 0) {
-		printk(KERN_ERR 
+		printk(KERN_ERR
 		       "%s %s: can't create entry in proc filesystem!\n",
 		       __FUNCTION__, VLAN_NAME);
 		return err;
@@ -108,7 +108,7 @@ static int __init vlan_proto_init(void)
 	return 0;
 }
 
-/* Cleanup all vlan devices 
+/* Cleanup all vlan devices
  * Note: devices that have been registered that but not
  * brought up will exist but have no module ref count.
  */
@@ -132,7 +132,7 @@ static void __exit vlan_cleanup_devices(void)
 /*
  *     Module 'remove' entry point.
  *     o delete /proc/net/router directory and static entries.
- */ 
+ */
 static void __exit vlan_cleanup_module(void)
 {
 	int i;
@@ -184,7 +184,7 @@ struct net_device *__find_vlan_dev(struct net_device *real_dev,
 	struct vlan_group *grp = __vlan_find_group(real_dev->ifindex);
 
 	if (grp)
-                return grp->vlan_devices[VID];
+		return grp->vlan_devices[VID];
 
 	return NULL;
 }
@@ -269,7 +269,7 @@ static int unregister_vlan_dev(struct net_device *real_dev,
 		}
 	}
 
-        return ret;
+	return ret;
 }
 
 static int unregister_vlan_device(const char *vlan_IF_name)
@@ -295,7 +295,7 @@ static int unregister_vlan_device(const char *vlan_IF_name)
 			if (ret == 1)
 				ret = 0;
 		} else {
-			printk(VLAN_ERR 
+			printk(VLAN_ERR
 			       "%s: ERROR:	Tried to remove a non-vlan device "
 			       "with VLAN code, name: %s  priv_flags: %hX\n",
 			       __FUNCTION__, dev->name, dev->priv_flags);
@@ -315,7 +315,7 @@ static int unregister_vlan_device(const char *vlan_IF_name)
 static void vlan_setup(struct net_device *new_dev)
 {
 	SET_MODULE_OWNER(new_dev);
-	    
+
 	/* new_dev->ifindex = 0;  it will be set when added to
 	 * the global list.
 	 * iflink is set as well.
@@ -324,7 +324,7 @@ static void vlan_setup(struct net_device *new_dev)
 
 	/* Make this thing known as a VLAN device */
 	new_dev->priv_flags |= IFF_802_1Q_VLAN;
-				
+
 	/* Set us up to have no queue, as the underlying Hardware device
 	 * can do all the queueing we could want.
 	 */
@@ -461,7 +461,7 @@ static struct net_device *register_vlan_device(const char *eth_IF_name,
 	default:
 		snprintf(name, IFNAMSIZ, "vlan%.4i", VLAN_ID);
 	};
-		    
+
 	new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name,
 			       vlan_setup);
 
@@ -477,7 +477,7 @@ static struct net_device *register_vlan_device(const char *eth_IF_name,
 
 	new_dev->state = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
 					     (1<<__LINK_STATE_DORMANT))) |
-			 (1<<__LINK_STATE_PRESENT); 
+			 (1<<__LINK_STATE_PRESENT);
 
 	/* need 4 bytes for extra VLAN header info,
 	 * hope the underlying device can handle it.
@@ -496,7 +496,7 @@ static struct net_device *register_vlan_device(const char *eth_IF_name,
 	VLAN_MEM_DBG("new_dev->priv malloc, addr: %p  size: %i\n",
 		     new_dev->priv,
 		     sizeof(struct vlan_dev_info));
-	    
+
 	memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len);
 	memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len);
 	new_dev->addr_len = real_dev->addr_len;
@@ -521,7 +521,7 @@ static struct net_device *register_vlan_device(const char *eth_IF_name,
 	printk(VLAN_DBG "About to go find the group for idx: %i\n",
 	       real_dev->ifindex);
 #endif
-	    
+
 	if (register_netdevice(new_dev))
 		goto out_free_newdev;
 
@@ -543,22 +543,22 @@ static struct net_device *register_vlan_device(const char *eth_IF_name,
 		grp = kzalloc(sizeof(struct vlan_group), GFP_KERNEL);
 		if (!grp)
 			goto out_free_unregister;
-					
+
 		/* printk(KERN_ALERT "VLAN REGISTER:  Allocated new group.\n"); */
 		grp->real_dev_ifindex = real_dev->ifindex;
 
-		hlist_add_head_rcu(&grp->hlist, 
+		hlist_add_head_rcu(&grp->hlist,
 				   &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]);
 
 		if (real_dev->features & NETIF_F_HW_VLAN_RX)
 			real_dev->vlan_rx_register(real_dev, grp);
 	}
-	    
+
 	grp->vlan_devices[VLAN_ID] = new_dev;
 
 	if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */
-            	printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
-					                 new_dev->name);
+		printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
+							 new_dev->name);
 
 	if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
 		real_dev->vlan_rx_add_vid(real_dev, VLAN_ID);
@@ -635,7 +635,7 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			vlandev = grp->vlan_devices[i];
 			if (!vlandev)
 				continue;
-				
+
 			flgs = vlandev->flags;
 			if (flgs & IFF_UP)
 				continue;
@@ -643,7 +643,7 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			dev_change_flags(vlandev, flgs | IFF_UP);
 		}
 		break;
-		
+
 	case NETDEV_UNREGISTER:
 		/* Delete all VLANs for this dev. */
 		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
@@ -755,8 +755,8 @@ static int vlan_ioctl_handler(void __user *arg)
 		/* TODO:  Implement
 		   err = vlan_dev_get_ingress_priority(args);
 		   if (copy_to_user((void*)arg, &args,
-		        sizeof(struct vlan_ioctl_args))) {
-		        err = -EFAULT;
+			sizeof(struct vlan_ioctl_args))) {
+			err = -EFAULT;
 		   }
 		*/
 		err = -EINVAL;
@@ -765,8 +765,8 @@ static int vlan_ioctl_handler(void __user *arg)
 		/* TODO:  Implement
 		   err = vlan_dev_get_egress_priority(args.device1, &(args.args);
 		   if (copy_to_user((void*)arg, &args,
-		        sizeof(struct vlan_ioctl_args))) {
-		        err = -EFAULT;
+			sizeof(struct vlan_ioctl_args))) {
+			err = -EFAULT;
 		   }
 		*/
 		err = -EINVAL;
@@ -788,7 +788,7 @@ static int vlan_ioctl_handler(void __user *arg)
 		args.u.VID = vid;
 		if (copy_to_user(arg, &args,
 				 sizeof(struct vlan_ioctl_args))) {
-                      err = -EFAULT;
+		      err = -EFAULT;
 		}
 		break;
 

net/8021q/vlan.h

@@ -9,8 +9,8 @@
 #define VLAN_ERR KERN_ERR
 #define VLAN_INF KERN_INFO
 #define VLAN_DBG KERN_ALERT /* change these... to debug, having a hard time
-                             * changing the log level at run-time..for some reason.
-                             */
+			     * changing the log level at run-time..for some reason.
+			     */
 
 /*
 
@@ -24,7 +24,7 @@ I'll bet they might prove useful again... --Ben
 */
 
 /* This way they don't do anything! */
-#define VLAN_MEM_DBG(x, y, z) 
+#define VLAN_MEM_DBG(x, y, z)
 #define VLAN_FMEM_DBG(x, y)
 
 
@@ -51,10 +51,10 @@ struct net_device *__find_vlan_dev(struct net_device* real_dev,
 /* found in vlan_dev.c */
 int vlan_dev_rebuild_header(struct sk_buff *skb);
 int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-                  struct packet_type *ptype, struct net_device *orig_dev);
+		  struct packet_type *ptype, struct net_device *orig_dev);
 int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
-                         unsigned short type, void *daddr, void *saddr,
-                         unsigned len);
+			 unsigned short type, void *daddr, void *saddr,
+			 unsigned len);
 int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
 int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
 int vlan_dev_change_mtu(struct net_device *dev, int new_mtu);

net/8021q/vlan_dev.c

@@ -5,14 +5,14 @@
  * Authors:	Ben Greear <greearb@candelatech.com>
  *              Please send support related email to: vlan@scry.wanfear.com
  *              VLAN Home Page: http://www.candelatech.com/~greear/vlan.html
- * 
+ *
  * Fixes:       Mar 22 2001: Martin Bokaemper <mbokaemper@unispherenetworks.com>
  *                - reset skb->pkt_type on incoming packets when MAC was changed
  *                - see that changed MAC is saddr for outgoing packets
  *              Oct 20, 2001:  Ard van Breeman:
  *                - Fix MC-list, finally.
  *                - Flush MC-list on VLAN destroy.
- *                
+ *
  *
  *		This program is free software; you can redistribute it and/or
  *		modify it under the terms of the GNU General Public License
@@ -58,12 +58,12 @@ int vlan_dev_rebuild_header(struct sk_buff *skb)
 
 		/* TODO:  Confirm this will work with VLAN headers... */
 		return arp_find(veth->h_dest, skb);
-#endif	
+#endif
 	default:
 		printk(VLAN_DBG
-		       "%s: unable to resolve type %X addresses.\n", 
+		       "%s: unable to resolve type %X addresses.\n",
 		       dev->name, ntohs(veth->h_vlan_encapsulated_proto));
-	 
+
 		memcpy(veth->h_source, dev->dev_addr, ETH_ALEN);
 		break;
 	};
@@ -91,7 +91,7 @@ static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
 }
 
 /*
- *	Determine the packet's protocol ID. The rule here is that we 
+ *	Determine the packet's protocol ID. The rule here is that we
  *	assume 802.3 if the type field is short enough to be a length.
  *	This is normal practice and works for any 'now in use' protocol.
  *
@@ -113,7 +113,7 @@ static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
  *
  */
 int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
-                  struct packet_type* ptype, struct net_device *orig_dev)
+		  struct packet_type* ptype, struct net_device *orig_dev)
 {
 	unsigned char *rawp = NULL;
 	struct vlan_hdr *vhdr = (struct vlan_hdr *)(skb->data);
@@ -175,8 +175,8 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 
 #ifdef VLAN_DEBUG
 		printk(VLAN_DBG "%s: dropping skb: %p because came in on wrong device, dev: %s  real_dev: %s, skb_dev: %s\n",
-			__FUNCTION__, skb, dev->name, 
-			VLAN_DEV_INFO(skb->dev)->real_dev->name, 
+			__FUNCTION__, skb, dev->name,
+			VLAN_DEV_INFO(skb->dev)->real_dev->name,
 			skb->dev->name);
 #endif
 		kfree_skb(skb);
@@ -191,7 +191,7 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 
 #ifdef VLAN_DEBUG
 	printk(VLAN_DBG "%s: priority: %lu  for TCI: %hu (hbo)\n",
-		__FUNCTION__, (unsigned long)(skb->priority), 
+		__FUNCTION__, (unsigned long)(skb->priority),
 		ntohs(vhdr->h_vlan_TCI));
 #endif
 
@@ -207,7 +207,7 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 		stats->multicast++;
 		break;
 
-	case PACKET_OTHERHOST: 
+	case PACKET_OTHERHOST:
 		/* Our lower layer thinks this is not local, let's make sure.
 		 * This allows the VLAN to have a different MAC than the underlying
 		 * device, and still route correctly.
@@ -319,7 +319,7 @@ static inline unsigned short vlan_dev_get_egress_qos_mask(struct net_device* dev
 }
 
 /*
- *	Create the VLAN header for an arbitrary protocol layer 
+ *	Create the VLAN header for an arbitrary protocol layer
  *
  *	saddr=NULL	means use device source address
  *	daddr=NULL	means leave destination address (eg unresolved arp)
@@ -328,8 +328,8 @@ static inline unsigned short vlan_dev_get_egress_qos_mask(struct net_device* dev
  *  physical devices.
  */
 int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
-                         unsigned short type, void *daddr, void *saddr,
-                         unsigned len)
+			 unsigned short type, void *daddr, void *saddr,
+			 unsigned len)
 {
 	struct vlan_hdr *vhdr;
 	unsigned short veth_TCI = 0;
@@ -346,7 +346,7 @@ int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 	 * fixes some programs that get confused when they see a VLAN device
 	 * sending a frame that is VLAN encoded (the consensus is that the VLAN
 	 * device should look completely like an Ethernet device when the
-	 * REORDER_HEADER flag is set)	The drawback to this is some extra 
+	 * REORDER_HEADER flag is set)	The drawback to this is some extra
 	 * header shuffling in the hard_start_xmit.  Users can turn off this
 	 * REORDER behaviour with the vconfig tool.
 	 */
@@ -553,7 +553,7 @@ int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio
 	struct net_device *dev = dev_get_by_name(dev_name);
 	struct vlan_priority_tci_mapping *mp = NULL;
 	struct vlan_priority_tci_mapping *np;
-   
+
 	if (dev) {
 		if (dev->priv_flags & IFF_802_1Q_VLAN) {
 			/* See if a priority mapping exists.. */
@@ -610,13 +610,13 @@ int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val)
 				return -EINVAL;
 			}
 		} else {
-			printk(KERN_ERR 
+			printk(KERN_ERR
 			       "%s: %s is not a vlan device, priv_flags: %hX.\n",
 			       __FUNCTION__, dev->name, dev->priv_flags);
 			dev_put(dev);
 		}
 	} else {
-		printk(KERN_ERR  "%s: Could not find device: %s\n", 
+		printk(KERN_ERR  "%s: Could not find device: %s\n",
 			__FUNCTION__, dev_name);
 	}
 
@@ -700,7 +700,7 @@ int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p)
 }
 
 static inline int vlan_dmi_equals(struct dev_mc_list *dmi1,
-                                  struct dev_mc_list *dmi2)
+				  struct dev_mc_list *dmi2)
 {
 	return ((dmi1->dmi_addrlen == dmi2->dmi_addrlen) &&
 		(memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0));
@@ -810,7 +810,7 @@ int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
-		if (real_dev->do_ioctl && netif_device_present(real_dev)) 
+		if (real_dev->do_ioctl && netif_device_present(real_dev))
 			err = real_dev->do_ioctl(real_dev, &ifrr, cmd);
 		break;
 
@@ -818,7 +818,7 @@ int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		err = dev_ethtool(&ifrr);
 	}
 
-	if (!err) 
+	if (!err)
 		ifr->ifr_ifru = ifrr.ifr_ifru;
 
 	return err;

net/8021q/vlanproc.c

@@ -51,7 +51,7 @@ static int vlandev_seq_show(struct seq_file *seq, void *v);
 
 
 /*
- *	Names of the proc directory entries 
+ *	Names of the proc directory entries
  */
 
 static const char name_root[]	 = "vlan";
@@ -66,7 +66,7 @@ static const char name_conf[]	 = "config";
  */
 
 /*
- *	Generic /proc/net/vlan/<file> file and inode operations 
+ *	Generic /proc/net/vlan/<file> file and inode operations
  */
 
 static struct seq_operations vlan_seq_ops = {
@@ -111,13 +111,13 @@ static struct file_operations vlandev_fops = {
  */
 
 /*
- *	/proc/net/vlan 
+ *	/proc/net/vlan
  */
 
 static struct proc_dir_entry *proc_vlan_dir;
 
 /*
- *	/proc/net/vlan/config 
+ *	/proc/net/vlan/config
  */
 
 static struct proc_dir_entry *proc_vlan_conf;
@@ -238,15 +238,15 @@ int vlan_proc_rem_dev(struct net_device *vlandev)
  */
 
 /* starting at dev, find a VLAN device */
-static struct net_device *vlan_skip(struct net_device *dev) 
+static struct net_device *vlan_skip(struct net_device *dev)
 {
-	while (dev && !(dev->priv_flags & IFF_802_1Q_VLAN)) 
+	while (dev && !(dev->priv_flags & IFF_802_1Q_VLAN))
 		dev = dev->next;
 
 	return dev;
 }
 
-/* start read of /proc/net/vlan/config */ 
+/* start read of /proc/net/vlan/config */
 static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	struct net_device *dev;
@@ -256,19 +256,19 @@ static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
 
 	if (*pos == 0)
 		return SEQ_START_TOKEN;
-	
-	for (dev = vlan_skip(dev_base); dev && i < *pos; 
+
+	for (dev = vlan_skip(dev_base); dev && i < *pos;
 	     dev = vlan_skip(dev->next), ++i);
-		
+
 	return  (i == *pos) ? dev : NULL;
-} 
+}
 
 static void *vlan_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	++*pos;
 
-	return vlan_skip((v == SEQ_START_TOKEN)  
-			    ? dev_base 
+	return vlan_skip((v == SEQ_START_TOKEN)
+			    ? dev_base
 			    : ((struct net_device *)v)->next);
 }
 
@@ -287,13 +287,13 @@ static int vlan_seq_show(struct seq_file *seq, void *v)
 		if (vlan_name_type < ARRAY_SIZE(vlan_name_type_str))
 		    nmtype =  vlan_name_type_str[vlan_name_type];
 
-		seq_printf(seq, "Name-Type: %s\n", 
+		seq_printf(seq, "Name-Type: %s\n",
 			   nmtype ? nmtype :  "UNKNOWN" );
 	} else {
 		const struct net_device *vlandev = v;
 		const struct vlan_dev_info *dev_info = VLAN_DEV_INFO(vlandev);
 
-		seq_printf(seq, "%-15s| %d  | %s\n",  vlandev->name,  
+		seq_printf(seq, "%-15s| %d  | %s\n",  vlandev->name,
 			   dev_info->vlan_id,    dev_info->real_dev->name);
 	}
 	return 0;
@@ -323,13 +323,13 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
 	seq_puts(seq, "\n");
 	seq_printf(seq, fmt, "total frames transmitted", stats->tx_packets);
 	seq_printf(seq, fmt, "total bytes transmitted", stats->tx_bytes);
-	seq_printf(seq, fmt, "total headroom inc", 
+	seq_printf(seq, fmt, "total headroom inc",
 		   dev_info->cnt_inc_headroom_on_tx);
-	seq_printf(seq, fmt, "total encap on xmit", 
+	seq_printf(seq, fmt, "total encap on xmit",
 		   dev_info->cnt_encap_on_xmit);
 	seq_printf(seq, "Device: %s", dev_info->real_dev->name);
 	/* now show all PRIORITY mappings relating to this VLAN */
-	seq_printf(seq, 
+	seq_printf(seq,
 		       "\nINGRESS priority mappings: 0:%lu  1:%lu  2:%lu  3:%lu  4:%lu  5:%lu  6:%lu 7:%lu\n",
 		       dev_info->ingress_priority_map[0],
 		       dev_info->ingress_priority_map[1],