Commit 127b7218 authored by Nick Child's avatar Nick Child Committed by David S. Miller

ibmveth: Always stop tx queues during close

netif_stop_all_queues must be called before calling H_FREE_LOGICAL_LAN.
As a result, we can remove the pool_config field from the ibmveth
adapter structure.

Some device configuration changes call ibmveth_close in order to free
the current resources held by the device. These functions then make
their changes and call ibmveth_open to reallocate and reserve resources
for the device.

Prior to this commit, the flag pool_config was used to tell ibmveth_close
that it should not halt the transmit queue. pool_config was introduced in
commit 860f242e ("[PATCH] ibmveth change buffer pools dynamically")
to avoid interrupting the tx flow when making rx config changes. Since
then, other commits adopted this approach, even if making tx config
changes.

The issue with this approach was that the hypervisor freed all of
the devices control structures after the hcall H_FREE_LOGICAL_LAN
was performed but the transmit queues were never stopped. So the higher
layers in the network stack would continue transmission but any
H_SEND_LOGICAL_LAN hcall would fail with H_PARAMETER until the
hypervisor's structures for the device were allocated with the
H_REGISTER_LOGICAL_LAN hcall in ibmveth_open. This resulted in
no real networking harm but did cause several of these error
messages to be logged: "h_send_logical_lan failed with rc=-4"

So, instead of trying to keep the transmit queues alive during network
configuration changes, just stop the queues, make necessary changes then
restart the queues.
Signed-off-by: default avatarNick Child <nnac123@linux.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 233baf9a
......@@ -690,8 +690,7 @@ static int ibmveth_close(struct net_device *netdev)
napi_disable(&adapter->napi);
if (!adapter->pool_config)
netif_tx_stop_all_queues(netdev);
netif_tx_stop_all_queues(netdev);
h_vio_signal(adapter->vdev->unit_address, VIO_IRQ_DISABLE);
......@@ -799,9 +798,7 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data)
if (netif_running(dev)) {
restart = 1;
adapter->pool_config = 1;
ibmveth_close(dev);
adapter->pool_config = 0;
}
set_attr = 0;
......@@ -883,9 +880,7 @@ static int ibmveth_set_tso(struct net_device *dev, u32 data)
if (netif_running(dev)) {
restart = 1;
adapter->pool_config = 1;
ibmveth_close(dev);
adapter->pool_config = 0;
}
set_attr = 0;
......@@ -1535,9 +1530,7 @@ static int ibmveth_change_mtu(struct net_device *dev, int new_mtu)
only the buffer pools necessary to hold the new MTU */
if (netif_running(adapter->netdev)) {
need_restart = 1;
adapter->pool_config = 1;
ibmveth_close(adapter->netdev);
adapter->pool_config = 0;
}
/* Look for an active buffer pool that can hold the new MTU */
......@@ -1701,7 +1694,6 @@ static int ibmveth_probe(struct vio_dev *dev, const struct vio_device_id *id)
adapter->vdev = dev;
adapter->netdev = netdev;
adapter->mcastFilterSize = be32_to_cpu(*mcastFilterSize_p);
adapter->pool_config = 0;
ibmveth_init_link_settings(netdev);
netif_napi_add_weight(netdev, &adapter->napi, ibmveth_poll, 16);
......@@ -1841,9 +1833,7 @@ static ssize_t veth_pool_store(struct kobject *kobj, struct attribute *attr,
return -ENOMEM;
}
pool->active = 1;
adapter->pool_config = 1;
ibmveth_close(netdev);
adapter->pool_config = 0;
if ((rc = ibmveth_open(netdev)))
return rc;
} else {
......@@ -1869,10 +1859,8 @@ static ssize_t veth_pool_store(struct kobject *kobj, struct attribute *attr,
}
if (netif_running(netdev)) {
adapter->pool_config = 1;
ibmveth_close(netdev);
pool->active = 0;
adapter->pool_config = 0;
if ((rc = ibmveth_open(netdev)))
return rc;
}
......@@ -1883,9 +1871,7 @@ static ssize_t veth_pool_store(struct kobject *kobj, struct attribute *attr,
return -EINVAL;
} else {
if (netif_running(netdev)) {
adapter->pool_config = 1;
ibmveth_close(netdev);
adapter->pool_config = 0;
pool->size = value;
if ((rc = ibmveth_open(netdev)))
return rc;
......@@ -1898,9 +1884,7 @@ static ssize_t veth_pool_store(struct kobject *kobj, struct attribute *attr,
return -EINVAL;
} else {
if (netif_running(netdev)) {
adapter->pool_config = 1;
ibmveth_close(netdev);
adapter->pool_config = 0;
pool->buff_size = value;
if ((rc = ibmveth_open(netdev)))
return rc;
......
......@@ -146,7 +146,6 @@ struct ibmveth_adapter {
dma_addr_t filter_list_dma;
struct ibmveth_buff_pool rx_buff_pool[IBMVETH_NUM_BUFF_POOLS];
struct ibmveth_rx_q rx_queue;
int pool_config;
int rx_csum;
int large_send;
bool is_active_trunk;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment