Commit 12a87c64 authored by Dale Farnsworth's avatar Dale Farnsworth Committed by Jeff Garzik

[PATCH] mv643xx_eth: Rename "channels" to "queues"

Use better terminology for HW queues.  No functional changes.
Signed-off-by: default avatarDale Farnsworth <dale@farnsworth.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent e38fd1a0
......@@ -83,9 +83,9 @@ static void eth_port_uc_addr_get(struct net_device *dev,
unsigned char *MacAddr);
static void eth_port_set_multicast_list(struct net_device *);
static void mv643xx_eth_port_enable_tx(unsigned int port_num,
unsigned int channels);
unsigned int queues);
static void mv643xx_eth_port_enable_rx(unsigned int port_num,
unsigned int channels);
unsigned int queues);
static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num);
static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num);
static int mv643xx_eth_open(struct net_device *);
......@@ -466,7 +466,7 @@ static void mv643xx_eth_update_pscr(struct net_device *dev,
struct mv643xx_private *mp = netdev_priv(dev);
int port_num = mp->port_num;
u32 o_pscr, n_pscr;
unsigned int channels;
unsigned int queues;
o_pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
n_pscr = o_pscr;
......@@ -494,7 +494,7 @@ static void mv643xx_eth_update_pscr(struct net_device *dev,
mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
n_pscr);
else {
channels = mv643xx_eth_port_disable_tx(port_num);
queues = mv643xx_eth_port_disable_tx(port_num);
o_pscr &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
......@@ -503,8 +503,8 @@ static void mv643xx_eth_update_pscr(struct net_device *dev,
n_pscr);
mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
n_pscr);
if (channels)
mv643xx_eth_port_enable_tx(port_num, channels);
if (queues)
mv643xx_eth_port_enable_tx(port_num, queues);
}
}
}
......@@ -2453,28 +2453,28 @@ static void ethernet_phy_reset(unsigned int eth_port_num)
}
static void mv643xx_eth_port_enable_tx(unsigned int port_num,
unsigned int channels)
unsigned int queues)
{
mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num), channels);
mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num), queues);
}
static void mv643xx_eth_port_enable_rx(unsigned int port_num,
unsigned int channels)
unsigned int queues)
{
mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), channels);
mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), queues);
}
static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num)
{
u32 channels;
u32 queues;
/* Stop Tx port activity. Check port Tx activity. */
channels = mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
queues = mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
& 0xFF;
if (channels) {
/* Issue stop command for active channels only */
if (queues) {
/* Issue stop command for active queues only */
mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num),
(channels << 8));
(queues << 8));
/* Wait for all Tx activity to terminate. */
/* Check port cause register that all Tx queues are stopped */
......@@ -2488,20 +2488,20 @@ static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num)
udelay(PHY_WAIT_MICRO_SECONDS);
}
return channels;
return queues;
}
static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
{
u32 channels;
u32 queues;
/* Stop Rx port activity. Check port Rx activity. */
channels = mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
queues = mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
& 0xFF;
if (channels) {
/* Issue stop command for active channels only */
if (queues) {
/* Issue stop command for active queues only */
mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
(channels << 8));
(queues << 8));
/* Wait for all Rx activity to terminate. */
/* Check port cause register that all Rx queues are stopped */
......@@ -2510,7 +2510,7 @@ static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
udelay(PHY_WAIT_MICRO_SECONDS);
}
return channels;
return queues;
}
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment