Commit 13569a70 authored by Emilio López's avatar Emilio López Committed by Mike Turquette

clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates

This patchset adds DT support for all the AXI, AHB, APB0 and APB1
gates present on sunxi SoCs.
Signed-off-by: default avatarEmilio López <emilio@elopez.com.ar>
Reviewed-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent 056b2053
......@@ -10,15 +10,23 @@ Required properties:
"allwinner,sun4i-pll1-clk" - for the main PLL clock
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
"allwinner,sun4i-ahb-clk" - for the AHB clock
"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
"allwinner,sun4i-apb0-clk" - for the APB0 clock
"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
"allwinner,sun4i-apb1-clk" - for the APB1 clock
"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
Required properties for all clocks:
- reg : shall be the control register address for the clock.
- clocks : shall be the input parent clock(s) phandle for the clock
- #clock-cells : from common clock binding; shall be set to 0.
- #clock-cells : from common clock binding; shall be set to 0 except for
"allwinner,sun4i-*-gates-clk" where it shall be set to 1
Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
- clock-output-names : the corresponding gate names that the clock controls
For example:
......@@ -42,3 +50,102 @@ cpu: cpu@01c20054 {
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>;
};
Gate clock outputs
The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
their corresponding offsets as present on sun4i are listed below. Note that
some of these gates are not present on sun5i.
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun4i-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2*
EHCI1 3
OHCI1 4*
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12**
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
PATA 24
SATA 25**
GPS 26*
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE0 46
DE_FE1 47
MP 50
MALI400 52
* APB0 gates ("allwinner,sun4i-apb0-gates-clk")
CODEC 0
SPDIF 1*
AC97 2
IIS 3
PIO 5
IR0 6
IR1 7
KEYPAD 10
* APB1 gates ("allwinner,sun4i-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
CAN 4
SCR 5
PS20 6
PS21 7
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
......@@ -302,6 +302,82 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
}
/**
* sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
*/
#define SUNXI_GATES_MAX_SIZE 64
struct gates_data {
DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
};
static const __initconst struct gates_data axi_gates_data = {
.mask = {1},
};
static const __initconst struct gates_data ahb_gates_data = {
.mask = {0x7F77FFF, 0x14FB3F},
};
static const __initconst struct gates_data apb0_gates_data = {
.mask = {0x4EF},
};
static const __initconst struct gates_data apb1_gates_data = {
.mask = {0xFF00F7},
};
static void __init sunxi_gates_clk_setup(struct device_node *node,
struct gates_data *data)
{
struct clk_onecell_data *clk_data;
const char *clk_parent;
const char *clk_name;
void *reg;
int qty;
int i = 0;
int j = 0;
int ignore;
reg = of_iomap(node, 0);
clk_parent = of_clk_get_parent_name(node, 0);
/* Worst-case size approximation and memory allocation */
qty = find_last_bit(data->mask, SUNXI_GATES_MAX_SIZE);
clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
if (!clk_data)
return;
clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL);
if (!clk_data->clks) {
kfree(clk_data);
return;
}
for_each_set_bit(i, data->mask, SUNXI_GATES_MAX_SIZE) {
of_property_read_string_index(node, "clock-output-names",
j, &clk_name);
/* No driver claims this clock, but it should remain gated */
ignore = !strcmp("ahb_sdram", clk_name) ? CLK_IGNORE_UNUSED : 0;
clk_data->clks[i] = clk_register_gate(NULL, clk_name,
clk_parent, ignore,
reg + 4 * (i/32), i % 32,
0, &clk_lock);
WARN_ON(IS_ERR(clk_data->clks[i]));
j++;
}
/* Adjust to the real max */
clk_data->clk_num = i;
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
}
/* Matches for of_clk_init */
static const __initconst struct of_device_id clk_match[] = {
{.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
......@@ -331,6 +407,15 @@ static const __initconst struct of_device_id clk_mux_match[] = {
{}
};
/* Matches for gate clocks */
static const __initconst struct of_device_id clk_gates_match[] = {
{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,},
{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,},
{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,},
{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,},
{}
};
static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
void *function)
{
......@@ -359,4 +444,7 @@ void __init sunxi_init_clocks(void)
/* Register mux clocks */
of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
/* Register gate clocks */
of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment