Commit 13622708 authored by Ben Dooks's avatar Ben Dooks

[ARM] S3C: Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat.

Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat ready
ready to clean out old include directories.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 57bd4b91
......@@ -30,7 +30,7 @@
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
[DMACH_XD0] = {
......
......@@ -32,7 +32,7 @@
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
#define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }
......
......@@ -39,7 +39,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
#include <plat/s3c2412.h>
......
......@@ -30,7 +30,7 @@
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {
[DMACH_XD0] = {
......
......@@ -31,7 +31,7 @@
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <asm/plat-s3c24xx/regs-iis.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
#define MAP(x) { \
[0] = (x) | DMA_CH_VALID, \
......
......@@ -33,7 +33,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
/* Serial port registrations */
......
......@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <asm/plat-s3c24xx/regs-spi.h>
#include <plat/regs-spi.h>
#include <mach/spi.h>
struct s3c24xx_spi {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment