arm64: dts: ls1046a: make dma-coherent global to the SoC

These SoCs are really completely dma coherent in their entirety so add
the dma-coherent property at the soc level in the device tree and drop
the instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -273,6 +273,7 @@ soc: soc {
 		#size-cells = <2>;
 		ranges;
 		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+		dma-coherent;
 
 		ddr: memory-controller@1080000 {
 			compatible = "fsl,qoriq-memory-controller";
@@ -355,7 +356,6 @@ crypto: crypto@1700000 {
 			ranges = <0x0 0x00 0x1700000 0x100000>;
 			reg = <0x00 0x1700000 0x0 0x100000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
 
 			sec_jr0: jr@10000 {
 				compatible = "fsl,sec-v5.4-job-ring",
@@ -794,7 +794,6 @@ pcie1: pcie@3400000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -834,7 +833,6 @@ pcie2: pcie@3500000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
@@ -874,7 +872,6 @@ pcie3: pcie@3600000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			dma-coherent;
 			num-viewport = <8>;
 			bus-range = <0x0 0xff>;
 			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */