Commit 136dfa5e authored by Linus Walleij's avatar Linus Walleij

ARM: delete mach-shark

The Shark machine sub-architecture (also known as DNARD, the
DIGITAL Network Appliance Reference Design) lacks a maintainer
able to apply and test patches to modernize the architecture.

It is suspected that the current kernel, while it compiles,
does not even boot on this machine. The listed maintainer has
expressed that he will not be able to spend any time on the
maintenance for the coming year.

So let's delete it from the kernel for now. It can always be
resurrected with git revert if maintenance is resumed.

As the VIA82c505 PCI adapter was only used by this
architecture, that gets deleted too.

Cc: arm@kernel.org
Cc: Alexander Schulz <alex@shark-linux.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 272b98c6
...@@ -824,20 +824,6 @@ config ARCH_EXYNOS ...@@ -824,20 +824,6 @@ config ARCH_EXYNOS
help help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
config ARCH_SHARK
bool "Shark"
select ARCH_USES_GETTIMEOFFSET
select CPU_SA110
select ISA
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_DAVINCI config ARCH_DAVINCI
bool "TI DaVinci" bool "TI DaVinci"
select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_HAS_HOLES_MEMORYMODEL
...@@ -1431,12 +1417,6 @@ config PCI_NANOENGINE ...@@ -1431,12 +1417,6 @@ config PCI_NANOENGINE
config PCI_SYSCALL config PCI_SYSCALL
def_bool PCI def_bool PCI
# Select the host bridge type
config PCI_HOST_VIA82C505
bool
depends on PCI && ARCH_SHARK
default y
config PCI_HOST_ITE8152 config PCI_HOST_ITE8152
bool bool
depends on PCI && MACH_ARMCORE depends on PCI && MACH_ARMCORE
......
...@@ -188,7 +188,6 @@ machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 ...@@ -188,7 +188,6 @@ machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0
machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PC100) += s5pc100
machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_S5PV210) += s5pv210
machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_SIRF) += prima2
......
...@@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y) ...@@ -44,10 +44,6 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
OBJS += ll_char_wr.o font.o OBJS += ll_char_wr.o font.o
endif endif
ifeq ($(CONFIG_ARCH_SHARK),y)
OBJS += head-shark.o ofw-shark.o
endif
ifeq ($(CONFIG_ARCH_SA1100),y) ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o OBJS += head-sa1100.o
endif endif
......
/* The head-file for the Shark
* by Alexander Schulz
*
* Does the following:
* - get the memory layout from firmware. This can only be done as long as the mmu
* is still on.
* - switch the mmu off, so we have physical addresses
* - copy the kernel to 0x08508000. This is done to have a fixed address where the
* C-parts (misc.c) are executed. This address must be known at compile-time,
* but the load-address of the kernel depends on how much memory is installed.
* - Jump to this location.
* - Set r8 with 0, r7 with the architecture ID for head.S
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
.section ".start", "ax"
.arch armv4
b __beginning
__ofw_data: .long 0 @ the number of memory blocks
.space 128 @ (startaddr,size) ...
.space 128 @ bootargs
.align
__beginning: mov r4, r0 @ save the entry to the firmware
mov r0, #0xC0 @ disable irq and fiq
mov r1, r0
mrs r3, cpsr
bic r2, r3, r0
eor r2, r2, r1
msr cpsr_c, r2
mov r0, r4 @ get the Memory layout from firmware
adr r1, __ofw_data
add r2, r1, #4
mov lr, pc
b ofw_init
mov r1, #0
adr r2, __mmu_off @ calculate physical address
sub r2, r2, #0xf0000000 @ openprom maps us at f000 virt, 0e50 phys
adr r0, __ofw_data
ldr r0, [r0, #4]
add r2, r2, r0
add r2, r2, #0x00500000
mrc p15, 0, r3, c1, c0
bic r3, r3, #0xC @ Write Buffer and DCache
bic r3, r3, #0x1000 @ ICache
mcr p15, 0, r3, c1, c0 @ disabled
mov r0, #0
mcr p15, 0, r0, c7, c7 @ flush I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
mcr p15, 0, r0, c8, c7 @ flush I,D TLBs on v4
bic r3, r3, #0x1 @ MMU
mcr p15, 0, r3, c1, c0 @ disabled
mov pc, r2
__copy_target: .long 0x08507FFC
__copy_end: .long 0x08607FFC
.word _start
.word __bss_start
.align
__temp_stack: .space 128
__mmu_off:
adr r0, __ofw_data @ read the 1. entry of the memory map
ldr r0, [r0, #4]
orr r0, r0, #0x00600000
sub r0, r0, #4
ldr r1, __copy_end
ldr r3, __copy_target
/* r0 = 0x0e600000 (current end of kernelcode)
* r3 = 0x08508000 (where it should begin)
* r1 = 0x08608000 (end of copying area, 1MB)
* The kernel is compressed, so 1 MB should be enough.
* copy the kernel to the beginning of physical memory
* We start from the highest address, so we can copy
* from 0x08500000 to 0x08508000 if we have only 8MB
*/
/* As we get more 2.6-kernels it gets more and more
* uncomfortable to be bound to kernel images of 1MB only.
* So we add a loop here, to be able to copy some more.
* Alexander Schulz 2005-07-17
*/
mov r4, #3 @ How many megabytes to copy
__MoveCode: sub r4, r4, #1
__Copy: ldr r2, [r0], #-4
str r2, [r1], #-4
teq r1, r3
bne __Copy
/* The firmware maps us in blocks of 1 MB, the next block is
_below_ the last one. So our decrementing source pointer
ist right here, but the destination pointer must be increased
by 2 MB */
add r1, r1, #0x00200000
add r3, r3, #0x00100000
teq r4, #0
bne __MoveCode
/* and jump to it */
adr r2, __go_on @ where we want to jump
adr r0, __ofw_data @ read the 1. entry of the memory map
ldr r0, [r0, #4]
sub r2, r2, r0 @ we are mapped add 0e50 now, sub that (-0e00)
sub r2, r2, #0x00500000 @ -0050
ldr r0, __copy_target @ and add 0850 8000 instead
add r0, r0, #4
add r2, r2, r0
mov pc, r2 @ and jump there
__go_on:
adr sp, __temp_stack
add sp, sp, #128
adr r0, __ofw_data
mov lr, pc
b create_params
mov r8, #0
mov r7, #15
/*
* linux/arch/arm/boot/compressed/ofw-shark.c
*
* by Alexander Schulz
*
* This file is used to get some basic information
* about the memory layout of the shark we are running
* on. Memory is usually divided in blocks a 8 MB.
* And bootargs are copied from OpenFirmware.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/setup.h>
#include <asm/page.h>
asmlinkage void
create_params (unsigned long *buffer)
{
/* Is there a better address? Also change in mach-shark/core.c */
struct tag *tag = (struct tag *) 0x08003000;
int j,i,m,k,nr_banks,size;
unsigned char *c;
k = 0;
/* Head of the taglist */
tag->hdr.tag = ATAG_CORE;
tag->hdr.size = tag_size(tag_core);
tag->u.core.flags = 1;
tag->u.core.pagesize = PAGE_SIZE;
tag->u.core.rootdev = 0;
/* Build up one tagged block for each memory region */
size=0;
nr_banks=(unsigned int) buffer[0];
for (j=0;j<nr_banks;j++){
/* search the lowest address and put it into the next entry */
/* not a fast sort algorithm, but there are at most 8 entries */
/* and this is used only once anyway */
m=0xffffffff;
for (i=0;i<(unsigned int) buffer[0];i++){
if (buffer[2*i+1]<m) {
m=buffer[2*i+1];
k=i;
}
}
tag = tag_next(tag);
tag->hdr.tag = ATAG_MEM;
tag->hdr.size = tag_size(tag_mem32);
tag->u.mem.size = buffer[2*k+2];
tag->u.mem.start = buffer[2*k+1];
size += buffer[2*k+2];
buffer[2*k+1]=0xffffffff; /* mark as copied */
}
/* The command line */
tag = tag_next(tag);
tag->hdr.tag = ATAG_CMDLINE;
c=(unsigned char *)(&buffer[34]);
j=0;
while (*c) tag->u.cmdline.cmdline[j++]=*c++;
tag->u.cmdline.cmdline[j]=0;
tag->hdr.size = (j + 7 + sizeof(struct tag_header)) >> 2;
/* Hardware revision */
tag = tag_next(tag);
tag->hdr.tag = ATAG_REVISION;
tag->hdr.size = tag_size(tag_revision);
tag->u.revision.rev = ((unsigned char) buffer[33])-'0';
/* End of the taglist */
tag = tag_next(tag);
tag->hdr.tag = 0;
tag->hdr.size = 0;
}
typedef int (*ofw_handle_t)(void *);
/* Everything below is called with a wrong MMU setting.
* This means: no string constants, no initialization of
* arrays, no global variables! This is ugly but I didn't
* want to write this in assembler :-)
*/
int
of_decode_int(const unsigned char *p)
{
unsigned int i = *p++ << 8;
i = (i + *p++) << 8;
i = (i + *p++) << 8;
return (i + *p);
}
int
OF_finddevice(ofw_handle_t openfirmware, char *name)
{
unsigned int args[8];
char service[12];
service[0]='f';
service[1]='i';
service[2]='n';
service[3]='d';
service[4]='d';
service[5]='e';
service[6]='v';
service[7]='i';
service[8]='c';
service[9]='e';
service[10]='\0';
args[0]=(unsigned int)service;
args[1]=1;
args[2]=1;
args[3]=(unsigned int)name;
if (openfirmware(args) == -1)
return -1;
return args[4];
}
int
OF_getproplen(ofw_handle_t openfirmware, int handle, char *prop)
{
unsigned int args[8];
char service[12];
service[0]='g';
service[1]='e';
service[2]='t';
service[3]='p';
service[4]='r';
service[5]='o';
service[6]='p';
service[7]='l';
service[8]='e';
service[9]='n';
service[10]='\0';
args[0] = (unsigned int)service;
args[1] = 2;
args[2] = 1;
args[3] = (unsigned int)handle;
args[4] = (unsigned int)prop;
if (openfirmware(args) == -1)
return -1;
return args[5];
}
int
OF_getprop(ofw_handle_t openfirmware, int handle, char *prop, void *buf, unsigned int buflen)
{
unsigned int args[8];
char service[8];
service[0]='g';
service[1]='e';
service[2]='t';
service[3]='p';
service[4]='r';
service[5]='o';
service[6]='p';
service[7]='\0';
args[0] = (unsigned int)service;
args[1] = 4;
args[2] = 1;
args[3] = (unsigned int)handle;
args[4] = (unsigned int)prop;
args[5] = (unsigned int)buf;
args[6] = buflen;
if (openfirmware(args) == -1)
return -1;
return args[7];
}
asmlinkage void ofw_init(ofw_handle_t o, int *nomr, int *pointer)
{
int phandle,i,mem_len,buffer[32];
char temp[15];
temp[0]='/';
temp[1]='m';
temp[2]='e';
temp[3]='m';
temp[4]='o';
temp[5]='r';
temp[6]='y';
temp[7]='\0';
phandle=OF_finddevice(o,temp);
temp[0]='r';
temp[1]='e';
temp[2]='g';
temp[3]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
*nomr=mem_len >> 3;
for (i=0; i<=mem_len/4; i++) pointer[i]=of_decode_int((const unsigned char *)&buffer[i]);
temp[0]='/';
temp[1]='c';
temp[2]='h';
temp[3]='o';
temp[4]='s';
temp[5]='e';
temp[6]='n';
temp[7]='\0';
phandle=OF_finddevice(o,temp);
temp[0]='b';
temp[1]='o';
temp[2]='o';
temp[3]='t';
temp[4]='a';
temp[5]='r';
temp[6]='g';
temp[7]='s';
temp[8]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
if (mem_len > 128) mem_len=128;
for (i=0; i<=mem_len/4; i++) pointer[i+33]=buffer[i];
pointer[i+33]=0;
temp[0]='/';
temp[1]='\0';
phandle=OF_finddevice(o,temp);
temp[0]='b';
temp[1]='a';
temp[2]='n';
temp[3]='n';
temp[4]='e';
temp[5]='r';
temp[6]='-';
temp[7]='n';
temp[8]='a';
temp[9]='m';
temp[10]='e';
temp[11]='\0';
mem_len = OF_getproplen(o,phandle, temp);
OF_getprop(o,phandle, temp, buffer, mem_len);
* ((unsigned char *) &pointer[32]) = ((unsigned char *) buffer)[mem_len-2];
}
...@@ -6,7 +6,6 @@ obj-y += firmware.o ...@@ -6,7 +6,6 @@ obj-y += firmware.o
obj-$(CONFIG_ICST) += icst.o obj-$(CONFIG_ICST) += icst.o
obj-$(CONFIG_SA1111) += sa1111.o obj-$(CONFIG_SA1111) += sa1111.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
obj-$(CONFIG_DMABOUNCE) += dmabounce.o obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
......
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <asm/mach/pci.h>
#define MAX_SLOTS 7
#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
static int
via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
outl(CONFIG_CMD(bus,devfn,where),0xCF8);
switch (size) {
case 1:
*value=inb(0xCFC + (where&3));
break;
case 2:
*value=inw(0xCFC + (where&2));
break;
case 4:
*value=inl(0xCFC);
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
outl(CONFIG_CMD(bus,devfn,where),0xCF8);
switch (size) {
case 1:
outb(value, 0xCFC + (where&3));
break;
case 2:
outw(value, 0xCFC + (where&2));
break;
case 4:
outl(value, 0xCFC);
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops via82c505_ops = {
.read = via82c505_read_config,
.write = via82c505_write_config,
};
void __init via82c505_preinit(void)
{
printk(KERN_DEBUG "PCI: VIA 82c505\n");
if (!request_region(0xA8,2,"via config")) {
printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");
return;
}
if (!request_region(0xCF8,8,"pci config")) {
printk(KERN_WARNING"VIA 82c505: Unable to request region 0xCF8\n");
release_region(0xA8, 2);
return;
}
/* Enable compatible Mode */
outb(0x96,0xA8);
outb(0x18,0xA9);
outb(0x93,0xA8);
outb(0xd0,0xA9);
}
int __init via82c505_setup(int nr, struct pci_sys_data *sys)
{
return (nr == 0);
}
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_SHARK=y
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_SCSI=m
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_CS89x0=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_PRINTER=m
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_CYBER2000=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_SOUND=m
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
CONFIG_SOUND_SB=m
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_CMOS=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_DEBUG_USER=y
...@@ -106,8 +106,4 @@ extern int dc21285_setup(int nr, struct pci_sys_data *); ...@@ -106,8 +106,4 @@ extern int dc21285_setup(int nr, struct pci_sys_data *);
extern void dc21285_preinit(void); extern void dc21285_preinit(void);
extern void dc21285_postinit(void); extern void dc21285_postinit(void);
extern struct pci_ops via82c505_ops;
extern int via82c505_setup(int nr, struct pci_sys_data *);
extern void via82c505_init(void *sysdata);
#endif /* __ASM_MACH_PCI_H */ #endif /* __ASM_MACH_PCI_H */
...@@ -41,7 +41,6 @@ else ...@@ -41,7 +41,6 @@ else
endif endif
lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o
lib-$(CONFIG_ARCH_SHARK) += io-shark.o
$(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
......
/*
* linux/arch/arm/lib/io-shark.c
*
* by Alexander Schulz
*
* derived from:
* linux/arch/arm/lib/io-ebsa.S
* Copyright (C) 1995, 1996 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := core.o dma.o irq.o pci.o leds.o
obj-m :=
obj-n :=
obj- :=
/*
* linux/arch/arm/mach-shark/arch.c
*
* Architecture specific stuff.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/serial_8250.h>
#include <linux/io.h>
#include <linux/cpu.h>
#include <linux/reboot.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/param.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#define ROMCARD_SIZE 0x08000000
#define ROMCARD_START 0x10000000
static void shark_restart(enum reboot_mode mode, const char *cmd)
{
short temp;
/* Reset the Machine via pc[3] of the sequoia chipset */
outw(0x09,0x24);
temp=inw(0x26);
temp = temp | (1<<3) | (1<<10);
outw(0x09,0x24);
outw(temp,0x26);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
.irq = 4,
.uartclk = 1843200,
.regshift = 0,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{
.iobase = 0x2f8,
.irq = 3,
.uartclk = 1843200,
.regshift = 0,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
};
static struct resource rtc_resources[] = {
[0] = {
.start = 0x70,
.end = 0x73,
.flags = IORESOURCE_IO,
},
[1] = {
.start = IRQ_ISA_RTC_ALARM,
.end = IRQ_ISA_RTC_ALARM,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device rtc_device = {
.name = "rtc_cmos",
.id = -1,
.resource = rtc_resources,
.num_resources = ARRAY_SIZE(rtc_resources),
};
static int __init shark_init(void)
{
int ret;
if (machine_is_shark())
{
ret = platform_device_register(&rtc_device);
if (ret) printk(KERN_ERR "Unable to register RTC device: %d\n", ret);
ret = platform_device_register(&serial_device);
if (ret) printk(KERN_ERR "Unable to register Serial device: %d\n", ret);
}
return 0;
}
arch_initcall(shark_init);
extern void shark_init_irq(void);
#define IRQ_TIMER 0
#define HZ_TIME ((1193180 + HZ/2) / HZ)
static irqreturn_t
shark_timer_interrupt(int irq, void *dev_id)
{
timer_tick();
return IRQ_HANDLED;
}
static struct irqaction shark_timer_irq = {
.name = "Shark Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = shark_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
static void __init shark_timer_init(void)
{
outb(0x34, 0x43); /* binary, mode 0, LSB/MSB, Ch 0 */
outb(HZ_TIME & 0xff, 0x40); /* LSB of count */
outb(HZ_TIME >> 8, 0x40);
setup_irq(IRQ_TIMER, &shark_timer_irq);
}
static void shark_init_early(void)
{
cpu_idle_poll_ctrl(true);
}
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
.init_early = shark_init_early,
.init_irq = shark_init_irq,
.init_time = shark_timer_init,
.dma_zone_size = SZ_4M,
.restart = shark_restart,
MACHINE_END
/*
* linux/arch/arm/mach-shark/dma.c
*
* by Alexander Schulz
*
* derived from:
* arch/arm/kernel/dma-ebsa285.c
* Copyright (C) 1998 Phil Blundell
*/
#include <linux/init.h>
#include <asm/dma.h>
#include <asm/mach/dma.h>
static int __init shark_dma_init(void)
{
#ifdef CONFIG_ISA_DMA
isa_init_dma();
#endif
return 0;
}
core_initcall(shark_dma_init);
/* arch/arm/mach-shark/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.macro addruart, rp, rv, tmp
mov \rp, #0x3f8
orr \rv, \rp, #0xfe000000
orr \rv, \rv, #0x00e00000
orr \rp, \rp, #0x40000000
.endm
.macro senduart,rd,rx
strb \rd, [\rx]
.endm
.macro waituart,rd,rx
.endm
.macro busyuart,rd,rx
mov \rd, #0
1001: add \rd, \rd, #1
teq \rd, #0x10000
bne 1001b
.endm
/*
* arch/arm/mach-shark/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Shark platform
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro get_irqnr_preamble, base, tmp
mov \base, #0xfe000000
orr \base, \base, #0x00e00000
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqstat, #0x0C
strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */
ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7
and \irqstat, \irqnr, #0x80
teq \irqstat, #0
beq 43f
and \irqnr, \irqnr, #7
teq \irqnr, #2
bne 44f
43: mov \irqstat, #0x0C
strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8
and \irqstat, \irqnr, #0x80
teq \irqstat, #0
beq 44f
and \irqnr, \irqnr, #7
add \irqnr, \irqnr, #8
44: teq \irqstat, #0
.endm
/*
* arch/arm/mach-shark/include/mach/framebuffer.h
*
* by Alexander Schulz
*
*/
#ifndef __ASM_ARCH_FRAMEBUFFER_H
#define __ASM_ARCH_FRAMEBUFFER_H
/* defines for the Framebuffer */
#define FB_START 0x06000000
#define FB_SIZE 0x01000000
#endif
/*
* arch/arm/mach-shark/include/mach/hardware.h
*
* by Alexander Schulz
*
* derived from:
* arch/arm/mach-ebsa110/include/mach/hardware.h
* Copyright (C) 1996-1999 Russell King.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#define UNCACHEABLE_ADDR 0xdf010000
#endif
/*
* arch/arm/mach-shark/include/mach/irqs.h
*
* by Alexander Schulz
*/
#define NR_IRQS 16
#define IRQ_ISA_KEYBOARD 1
#define IRQ_ISA_RTC_ALARM 8
#define I8042_KBD_IRQ 1
#define I8042_AUX_IRQ 12
#define IRQ_HARDDISK 14
/*
* arch/arm/mach-shark/include/mach/isa-dma.h
*
* by Alexander Schulz
*/
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
#define MAX_DMA_CHANNELS 8
#define DMA_ISA_CASCADE 4
#endif /* _ASM_ARCH_DMA_H */
/*
* arch/arm/mach-shark/include/mach/memory.h
*
* by Alexander Schulz
*
* derived from:
* arch/arm/mach-ebsa110/include/mach/memory.h
* Copyright (c) 1996-1999 Russell King.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#include <asm/sizes.h>
/*
* Physical DRAM offset.
*/
#define PLAT_PHYS_OFFSET UL(0x08000000)
/*
* Cache flushing area
*/
#define FLUSH_BASE_PHYS 0x80000000
#define FLUSH_BASE 0xdf000000
#endif
/*
* arch/arm/mach-shark/include/mach/timex.h
*
* by Alexander Schulz
*/
#define CLOCK_TICK_RATE 1193180
/*
* arch/arm/mach-shark/include/mach/uncompress.h
* by Alexander Schulz
*
* derived from:
* arch/arm/mach-footbridge/include/mach/uncompress.h
* Copyright (C) 1996,1997,1998 Russell King
*/
#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
static inline void putc(int c)
{
volatile int t;
SERIAL_BASE[0] = c;
t=0x10000;
while (t--);
}
static inline void flush(void)
{
}
#ifdef DEBUG
static void putn(unsigned long z)
{
int i;
char x;
putc('0');
putc('x');
for (i=0;i<8;i++) {
x='0'+((z>>((7-i)*4))&0xf);
if (x>'9') x=x-'0'+'A'-10;
putc(x);
}
}
static void putr()
{
putc('\n');
putc('\r');
}
#endif
/*
* nothing to do
*/
#define arch_decomp_setup()
/*
* linux/arch/arm/mach-shark/irq.c
*
* by Alexander Schulz
*
* derived from linux/arch/ppc/kernel/i8259.c and:
* arch/arm/mach-ebsa110/include/mach/irq.h
* Copyright (C) 1996-1998 Russell King
*/
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
/*
* 8259A PIC functions to handle ISA devices:
*/
/*
* This contains the irq mask for both 8259A irq controllers,
* Let through the cascade-interrupt no. 2 (ff-(1<<2)==fb)
*/
static unsigned char cached_irq_mask[2] = { 0xfb, 0xff };
/*
* These have to be protected by the irq controller spinlock
* before being called.
*/
static void shark_disable_8259A_irq(struct irq_data *d)
{
unsigned int mask;
if (d->irq<8) {
mask = 1 << d->irq;
cached_irq_mask[0] |= mask;
outb(cached_irq_mask[1],0xA1);
} else {
mask = 1 << (d->irq-8);
cached_irq_mask[1] |= mask;
outb(cached_irq_mask[0],0x21);
}
}
static void shark_enable_8259A_irq(struct irq_data *d)
{
unsigned int mask;
if (d->irq<8) {
mask = ~(1 << d->irq);
cached_irq_mask[0] &= mask;
outb(cached_irq_mask[0],0x21);
} else {
mask = ~(1 << (d->irq-8));
cached_irq_mask[1] &= mask;
outb(cached_irq_mask[1],0xA1);
}
}
static void shark_ack_8259A_irq(struct irq_data *d){}
static irqreturn_t bogus_int(int irq, void *dev_id)
{
printk("Got interrupt %i!\n",irq);
return IRQ_NONE;
}
static struct irqaction cascade;
static struct irq_chip fb_chip = {
.name = "XT-PIC",
.irq_ack = shark_ack_8259A_irq,
.irq_mask = shark_disable_8259A_irq,
.irq_unmask = shark_enable_8259A_irq,
};
void __init shark_init_irq(void)
{
int irq;
for (irq = 0; irq < NR_IRQS; irq++) {
irq_set_chip_and_handler(irq, &fb_chip, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
/* init master interrupt controller */
outb(0x11, 0x20); /* Start init sequence, edge triggered (level: 0x19)*/
outb(0x00, 0x21); /* Vector base */
outb(0x04, 0x21); /* Cascade (slave) on IRQ2 */
outb(0x03, 0x21); /* Select 8086 mode , auto eoi*/
outb(0x0A, 0x20);
/* init slave interrupt controller */
outb(0x11, 0xA0); /* Start init sequence, edge triggered */
outb(0x08, 0xA1); /* Vector base */
outb(0x02, 0xA1); /* Cascade (slave) on IRQ2 */
outb(0x03, 0xA1); /* Select 8086 mode, auto eoi */
outb(0x0A, 0xA0);
outb(cached_irq_mask[1],0xA1);
outb(cached_irq_mask[0],0x21);
//request_region(0x20,0x2,"pic1");
//request_region(0xA0,0x2,"pic2");
cascade.handler = bogus_int;
cascade.name = "cascade";
setup_irq(2,&cascade);
}
/*
* DIGITAL Shark LED control routines.
*
* Driver for the 3 user LEDs found on the Shark
* Based on Versatile and RealView machine LED code
*
* License terms: GNU General Public License (GPL) version 2
* Author: Bryan Wu <bryan.wu@canonical.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
struct shark_led {
struct led_classdev cdev;
u8 mask;
};
/*
* The triggers lines up below will only be used if the
* LED triggers are compiled in.
*/
static const struct {
const char *name;
const char *trigger;
} shark_leds[] = {
{ "shark:amber0", "default-on", }, /* Bit 5 */
{ "shark:green", "heartbeat", }, /* Bit 6 */
{ "shark:amber1", "cpu0" }, /* Bit 7 */
};
static u16 led_reg_read(void)
{
outw(0x09, 0x24);
return inw(0x26);
}
static void led_reg_write(u16 value)
{
outw(0x09, 0x24);
outw(value, 0x26);
}
static void shark_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct shark_led *led = container_of(cdev,
struct shark_led, cdev);
u16 reg = led_reg_read();
if (b != LED_OFF)
reg |= led->mask;
else
reg &= ~led->mask;
led_reg_write(reg);
}
static enum led_brightness shark_led_get(struct led_classdev *cdev)
{
struct shark_led *led = container_of(cdev,
struct shark_led, cdev);
u16 reg = led_reg_read();
return (reg & led->mask) ? LED_FULL : LED_OFF;
}
static int __init shark_leds_init(void)
{
int i;
u16 reg;
if (!machine_is_shark())
return -ENODEV;
for (i = 0; i < ARRAY_SIZE(shark_leds); i++) {
struct shark_led *led;
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (!led)
break;
led->cdev.name = shark_leds[i].name;
led->cdev.brightness_set = shark_led_set;
led->cdev.brightness_get = shark_led_get;
led->cdev.default_trigger = shark_leds[i].trigger;
/* Count in 5 bits offset */
led->mask = BIT(i + 5);
if (led_classdev_register(NULL, &led->cdev) < 0) {
kfree(led);
break;
}
}
/* Make LEDs independent of power-state */
request_region(0x24, 4, "led_reg");
reg = led_reg_read();
reg |= 1 << 10;
led_reg_write(reg);
return 0;
}
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(shark_leds_init);
#endif
/*
* linux/arch/arm/mach-shark/pci.c
*
* PCI bios-type initialisation for PCI machines
*
* Bits taken from various places.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/io.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#define IO_START 0x40000000
static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if (dev->bus->number == 0)
if (dev->devfn == 0)
return 255;
else
return 11;
else
return 255;
}
extern void __init via82c505_preinit(void);
static struct hw_pci shark_pci __initdata = {
.setup = via82c505_setup,
.map_irq = shark_map_irq,
.nr_controllers = 1,
.ops = &via82c505_ops,
.preinit = via82c505_preinit,
};
static int __init shark_pci_init(void)
{
if (!machine_is_shark())
return -ENODEV;
pcibios_min_io = 0x6000;
pcibios_min_mem = 0x50000000;
vga_base = 0xe8000000;
pci_ioremap_io(0, IO_START);
pci_common_init(&shark_pci);
return 0;
}
subsys_initcall(shark_pci_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment