Commit 1399846d authored by John Garry's avatar John Garry Committed by Martin K. Petersen

scsi: libsas: Delete sas_dump.{c, h}

The code in these files is not longer referenced, so delete them.
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 15bc43f3
......@@ -26,7 +26,6 @@ libsas-y += sas_init.o \
sas_phy.o \
sas_port.o \
sas_event.o \
sas_dump.o \
sas_discover.o \
sas_expander.o \
sas_scsi_host.o \
......
/*
* Serial Attached SCSI (SAS) Dump/Debugging routines
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "sas_dump.h"
static const char *sas_porte_str[] = {
[0] = "PORTE_BYTES_DMAED",
[1] = "PORTE_BROADCAST_RCVD",
[2] = "PORTE_LINK_RESET_ERR",
[3] = "PORTE_TIMER_EVENT",
[4] = "PORTE_HARD_RESET",
};
static const char *sas_phye_str[] = {
[0] = "PHYE_LOSS_OF_SIGNAL",
[1] = "PHYE_OOB_DONE",
[2] = "PHYE_OOB_ERROR",
[3] = "PHYE_SPINUP_HOLD",
[4] = "PHYE_RESUME_TIMEOUT",
};
void sas_dprint_porte(int phyid, enum port_event pe)
{
SAS_DPRINTK("phy%d: port event: %s\n", phyid, sas_porte_str[pe]);
}
void sas_dprint_phye(int phyid, enum phy_event pe)
{
SAS_DPRINTK("phy%d: phy event: %s\n", phyid, sas_phye_str[pe]);
}
void sas_dump_port(struct asd_sas_port *port)
{
SAS_DPRINTK("port%d: class:0x%x\n", port->id, port->class);
SAS_DPRINTK("port%d: sas_addr:%llx\n", port->id,
SAS_ADDR(port->sas_addr));
SAS_DPRINTK("port%d: attached_sas_addr:%llx\n", port->id,
SAS_ADDR(port->attached_sas_addr));
SAS_DPRINTK("port%d: iproto:0x%x\n", port->id, port->iproto);
SAS_DPRINTK("port%d: tproto:0x%x\n", port->id, port->tproto);
SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
}
/*
* Serial Attached SCSI (SAS) Dump/Debugging routines header file
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*
* This file is licensed under GPLv2.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include "sas_internal.h"
void sas_dprint_porte(int phyid, enum port_event pe);
void sas_dprint_phye(int phyid, enum phy_event pe);
void sas_dump_port(struct asd_sas_port *port);
......@@ -25,7 +25,6 @@
#include <linux/export.h>
#include <scsi/scsi_host.h>
#include "sas_internal.h"
#include "sas_dump.h"
int sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment