Commit 13a6ddb0 authored by Yinghai Lu's avatar Yinghai Lu Committed by Jesse Barnes

x86/pci: add pci=skip_isa_align command lines.

so we don't align the io port start address for pci cards.

also move out dmi check out acpi.c, because it has nothing to do with acpi.
it could spare some calling when we have several peer root buses.
Signed-off-by: default avatarYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 70b9f7dc
...@@ -1518,6 +1518,8 @@ and is between 256 and 4096 characters. It is defined in the file ...@@ -1518,6 +1518,8 @@ and is between 256 and 4096 characters. It is defined in the file
This is normally done in pci_enable_device(), This is normally done in pci_enable_device(),
so this option is a temporary workaround so this option is a temporary workaround
for broken drivers that don't call it. for broken drivers that don't call it.
skip_isa_align [X86] do not align io start addr, so can
handle more pci cards
firmware [ARM] Do not re-enumerate the bus but instead firmware [ARM] Do not re-enumerate the bus but instead
just use the configuration from the just use the configuration from the
bootloader. This is currently used on bootloader. This is currently used on
......
...@@ -6,45 +6,6 @@ ...@@ -6,45 +6,6 @@
#include <asm/numa.h> #include <asm/numa.h>
#include "pci.h" #include "pci.h"
static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
{
pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
return 0;
}
static struct dmi_system_id acpi_pciprobe_dmi_table[] __devinitdata = {
/*
* Systems where PCI IO resource ISA alignment can be skipped
* when the ISA enable bit in the bridge control is not set
*/
{
.callback = can_skip_ioresource_align,
.ident = "IBM System x3800",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
},
},
{
.callback = can_skip_ioresource_align,
.ident = "IBM System x3850",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
},
},
{
.callback = can_skip_ioresource_align,
.ident = "IBM System x3950",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
},
},
{}
};
struct pci_root_info { struct pci_root_info {
char *name; char *name;
unsigned int res_num; unsigned int res_num;
...@@ -196,8 +157,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do ...@@ -196,8 +157,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
int pxm; int pxm;
#endif #endif
dmi_check_system(acpi_pciprobe_dmi_table);
if (domain && !pci_domains_supported) { if (domain && !pci_domains_supported) {
printk(KERN_WARNING "PCI: Multiple domains not supported " printk(KERN_WARNING "PCI: Multiple domains not supported "
"(dom %d, bus %d)\n", domain, busnum); "(dom %d, bus %d)\n", domain, busnum);
......
...@@ -90,6 +90,50 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev) ...@@ -90,6 +90,50 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
rom_r->start = rom_r->end = rom_r->flags = 0; rom_r->start = rom_r->end = rom_r->flags = 0;
} }
static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
{
pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
return 0;
}
static struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitdata = {
/*
* Systems where PCI IO resource ISA alignment can be skipped
* when the ISA enable bit in the bridge control is not set
*/
{
.callback = can_skip_ioresource_align,
.ident = "IBM System x3800",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
},
},
{
.callback = can_skip_ioresource_align,
.ident = "IBM System x3850",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
},
},
{
.callback = can_skip_ioresource_align,
.ident = "IBM System x3950",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
},
},
{}
};
void __init dmi_check_skip_isa_align(void)
{
dmi_check_system(can_skip_pciprobe_dmi_table);
}
/* /*
* Called after each bus is probed, but before its children * Called after each bus is probed, but before its children
* are examined. * are examined.
...@@ -462,6 +506,9 @@ char * __devinit pcibios_setup(char *str) ...@@ -462,6 +506,9 @@ char * __devinit pcibios_setup(char *str)
} else if (!strcmp(str, "routeirq")) { } else if (!strcmp(str, "routeirq")) {
pci_routeirq = 1; pci_routeirq = 1;
return NULL; return NULL;
} else if (!strcmp(str, "skip_isa_align")) {
pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
return NULL;
} }
return str; return str;
} }
......
...@@ -33,6 +33,8 @@ static __init int pci_access_init(void) ...@@ -33,6 +33,8 @@ static __init int pci_access_init(void)
printk(KERN_ERR printk(KERN_ERR
"PCI: Fatal: No config space access function found\n"); "PCI: Fatal: No config space access function found\n");
dmi_check_skip_isa_align();
return 0; return 0;
} }
arch_initcall(pci_access_init); arch_initcall(pci_access_init);
...@@ -38,6 +38,8 @@ enum pci_bf_sort_state { ...@@ -38,6 +38,8 @@ enum pci_bf_sort_state {
pci_dmi_bf, pci_dmi_bf,
}; };
extern void __init dmi_check_skip_isa_align(void);
/* pci-i386.c */ /* pci-i386.c */
extern unsigned int pcibios_max_latency; extern unsigned int pcibios_max_latency;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment