Commit 13b54a50 authored by Haavard Skinnemoen's avatar Haavard Skinnemoen

[AVR32] Enable debugging only when needed

Keep track of processes being debugged (including the kernel itself)
and turn the OCD system on and off as appropriate. Since enabling
debugging turns off some optimizations in the CPU core, this fixes the
issue that enabling KProbes support or simply running a program under
gdbserver will reduce system performance significantly until the next
reboot.

The CPU performance will still be reduced for all processes while a
process is being debugged, but this is a lot better than reducing the
performance forever.
Signed-off-by: default avatarHaavard Skinnemoen <hskinnemoen@atmel.com>
parent 6ea6dd93
......@@ -6,7 +6,7 @@ extra-y := head.o vmlinux.lds
obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o
obj-y += syscall_table.o syscall-stubs.o irq.o
obj-y += setup.o traps.o semaphore.o ptrace.o
obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
obj-y += signal.o sys_avr32.o process.o time.o
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
......
......@@ -48,6 +48,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
pr_debug("arming kprobe at %p\n", p->addr);
ocd_enable(NULL);
*p->addr = BREAKPOINT_INSTRUCTION;
flush_icache_range((unsigned long)p->addr,
(unsigned long)p->addr + sizeof(kprobe_opcode_t));
......@@ -56,6 +57,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
pr_debug("disarming kprobe at %p\n", p->addr);
ocd_disable(NULL);
*p->addr = p->opcode;
flush_icache_range((unsigned long)p->addr,
(unsigned long)p->addr + sizeof(kprobe_opcode_t));
......@@ -260,9 +262,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
int __init arch_init_kprobes(void)
{
printk("KPROBES: Enabling monitor mode (MM|DBE)...\n");
ocd_write(DC, (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
/* TODO: Register kretprobe trampoline */
return 0;
}
/*
* Copyright (C) 2007 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <asm/ocd.h>
static long ocd_count;
static spinlock_t ocd_lock;
/**
* ocd_enable - enable on-chip debugging
* @child: task to be debugged
*
* If @child is non-NULL, ocd_enable() first checks if debugging has
* already been enabled for @child, and if it has, does nothing.
*
* If @child is NULL (e.g. when debugging the kernel), or debugging
* has not already been enabled for it, ocd_enable() increments the
* reference count and enables the debugging hardware.
*/
void ocd_enable(struct task_struct *child)
{
u32 dc;
if (child)
pr_debug("ocd_enable: child=%s [%u]\n",
child->comm, child->pid);
else
pr_debug("ocd_enable (no child)\n");
if (!child || !test_and_set_tsk_thread_flag(child, TIF_DEBUG)) {
spin_lock(&ocd_lock);
ocd_count++;
dc = ocd_read(DC);
dc |= (1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT);
ocd_write(DC, dc);
spin_unlock(&ocd_lock);
}
}
/**
* ocd_disable - disable on-chip debugging
* @child: task that was being debugged, but isn't anymore
*
* If @child is non-NULL, ocd_disable() checks if debugging is enabled
* for @child, and if it isn't, does nothing.
*
* If @child is NULL (e.g. when debugging the kernel), or debugging is
* enabled, ocd_disable() decrements the reference count, and if it
* reaches zero, disables the debugging hardware.
*/
void ocd_disable(struct task_struct *child)
{
u32 dc;
if (!child)
pr_debug("ocd_disable (no child)\n");
else if (test_tsk_thread_flag(child, TIF_DEBUG))
pr_debug("ocd_disable: child=%s [%u]\n",
child->comm, child->pid);
if (!child || test_and_clear_tsk_thread_flag(child, TIF_DEBUG)) {
spin_lock(&ocd_lock);
ocd_count--;
WARN_ON(ocd_count < 0);
if (ocd_count <= 0) {
dc = ocd_read(DC);
dc &= ~((1 << OCD_DC_MM_BIT) | (1 << OCD_DC_DBE_BIT));
ocd_write(DC, dc);
}
spin_unlock(&ocd_lock);
}
}
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/module.h>
static struct dentry *ocd_debugfs_root;
static struct dentry *ocd_debugfs_DC;
static struct dentry *ocd_debugfs_DS;
static struct dentry *ocd_debugfs_count;
static u64 ocd_DC_get(void *data)
{
return ocd_read(DC);
}
static void ocd_DC_set(void *data, u64 val)
{
ocd_write(DC, val);
}
DEFINE_SIMPLE_ATTRIBUTE(fops_DC, ocd_DC_get, ocd_DC_set, "0x%08llx\n");
static u64 ocd_DS_get(void *data)
{
return ocd_read(DS);
}
DEFINE_SIMPLE_ATTRIBUTE(fops_DS, ocd_DS_get, NULL, "0x%08llx\n");
static u64 ocd_count_get(void *data)
{
return ocd_count;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_count, ocd_count_get, NULL, "%lld\n");
static void ocd_debugfs_init(void)
{
struct dentry *root;
root = debugfs_create_dir("ocd", NULL);
if (IS_ERR(root) || !root)
goto err_root;
ocd_debugfs_root = root;
ocd_debugfs_DC = debugfs_create_file("DC", S_IRUSR | S_IWUSR,
root, NULL, &fops_DC);
if (!ocd_debugfs_DC)
goto err_DC;
ocd_debugfs_DS = debugfs_create_file("DS", S_IRUSR, root,
NULL, &fops_DS);
if (!ocd_debugfs_DS)
goto err_DS;
ocd_debugfs_count = debugfs_create_file("count", S_IRUSR, root,
NULL, &fops_count);
if (!ocd_debugfs_count)
goto err_count;
return;
err_count:
debugfs_remove(ocd_debugfs_DS);
err_DS:
debugfs_remove(ocd_debugfs_DC);
err_DC:
debugfs_remove(ocd_debugfs_root);
err_root:
printk(KERN_WARNING "OCD: Failed to create debugfs entries\n");
}
#else
static inline void ocd_debugfs_init(void)
{
}
#endif
static int __init ocd_init(void)
{
spin_lock_init(&ocd_lock);
ocd_debugfs_init();
return 0;
}
arch_initcall(ocd_init);
......@@ -103,7 +103,7 @@ EXPORT_SYMBOL(kernel_thread);
*/
void exit_thread(void)
{
/* nothing to do */
ocd_disable(current);
}
void flush_thread(void)
......@@ -345,6 +345,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
p->thread.cpu_context.ksp = (unsigned long)childregs;
p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
if ((clone_flags & CLONE_PTRACE) && test_thread_flag(TIF_DEBUG))
ocd_enable(p);
return 0;
}
......
......@@ -58,6 +58,7 @@ void ptrace_disable(struct task_struct *child)
{
clear_tsk_thread_flag(child, TIF_SINGLE_STEP);
clear_tsk_thread_flag(child, TIF_BREAKPOINT);
ocd_disable(child);
}
/*
......@@ -144,10 +145,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
pr_debug("ptrace: Enabling monitor mode...\n");
ocd_write(DC, ocd_read(DC) | (1 << OCD_DC_MM_BIT)
| (1 << OCD_DC_DBE_BIT));
switch (request) {
/* Read the word at location addr in the child process */
case PTRACE_PEEKTEXT:
......
......@@ -533,6 +533,11 @@ static inline void __ocd_write(unsigned int reg, unsigned long value)
#define ocd_read(reg) __ocd_read(OCD_##reg)
#define ocd_write(reg, value) __ocd_write(OCD_##reg, value)
struct task_struct;
void ocd_enable(struct task_struct *child);
void ocd_disable(struct task_struct *child);
#endif /* !__ASSEMBLER__ */
#endif /* __ASM_AVR32_OCD_H */
......@@ -121,7 +121,15 @@ struct pt_regs {
};
#ifdef __KERNEL__
# define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
#include <asm/ocd.h>
#define arch_ptrace_attach(child) ocd_enable(child)
#define user_mode(regs) (((regs)->sr & MODE_MASK) == MODE_USER)
#define instruction_pointer(regs) ((regs)->pc)
#define profile_pc(regs) instruction_pointer(regs)
extern void show_regs (struct pt_regs *);
static __inline__ int valid_user_regs(struct pt_regs *regs)
......@@ -141,9 +149,6 @@ static __inline__ int valid_user_regs(struct pt_regs *regs)
return 0;
}
#define instruction_pointer(regs) ((regs)->pc)
#define profile_pc(regs) instruction_pointer(regs)
#endif /* __KERNEL__ */
......
......@@ -88,6 +88,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_MEMDIE 6
#define TIF_RESTORE_SIGMASK 7 /* restore signal mask in do_signal */
#define TIF_CPU_GOING_TO_SLEEP 8 /* CPU is entering sleep 0 mode */
#define TIF_DEBUG 30 /* debugging enabled */
#define TIF_USERSPACE 31 /* true if FS sets userspace */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment