sky2: fix hang on shutdown (and other irq issues)

There are several problems with recent change to how IRQ's are setup.
   * synchronize_irq in sky2_shutdown would hang because there
     was no IRQ setup.
   * when device was set to down, some IRQ bits left enabled so a
     hardware error would produce IRQ with no handler
   * quick link on Optima chip set was enabled without handler
   * suspend/resume would leave IRQ on with no handler if device
     was down
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/sky2.c

@@ -1747,6 +1747,11 @@ static int sky2_up(struct net_device *dev)
 
 	sky2_hw_up(sky2);
 
+	if (hw->chip_id == CHIP_ID_YUKON_OPT ||
+	    hw->chip_id == CHIP_ID_YUKON_PRM ||
+	    hw->chip_id == CHIP_ID_YUKON_OP_2)
+		imask |= Y2_IS_PHY_QLNK;	/* enable PHY Quick Link */
+
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
 	imask |= portirq_msk[port];
@@ -2101,15 +2106,21 @@ static int sky2_down(struct net_device *dev)
 
 	netif_info(sky2, ifdown, dev, "disabling interface\n");
 
-	/* Disable port IRQ */
-	sky2_write32(hw, B0_IMSK,
-		     sky2_read32(hw, B0_IMSK) & ~portirq_msk[sky2->port]);
+	if (hw->ports == 1) {
+		sky2_write32(hw, B0_IMSK, 0);
 		sky2_read32(hw, B0_IMSK);
 
-	if (hw->ports == 1) {
 		napi_disable(&hw->napi);
 		free_irq(hw->pdev->irq, hw);
 	} else {
+		u32 imask;
+
+		/* Disable port IRQ */
+		imask  = sky2_read32(hw, B0_IMSK);
+		imask &= ~portirq_msk[sky2->port];
+		sky2_write32(hw, B0_IMSK, imask);
+		sky2_read32(hw, B0_IMSK);
+
 		synchronize_irq(hw->pdev->irq);
 		napi_synchronize(&hw->napi);
 	}
@@ -3258,7 +3269,6 @@ static void sky2_reset(struct sky2_hw *hw)
 	    hw->chip_id == CHIP_ID_YUKON_PRM ||
 	    hw->chip_id == CHIP_ID_YUKON_OP_2) {
 		u16 reg;
-		u32 msk;
 
 		if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
 			/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
@@ -3281,11 +3291,6 @@ static void sky2_reset(struct sky2_hw *hw)
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
 
-		/* enable PHY Quick Link */
-		msk = sky2_read32(hw, B0_IMSK);
-		msk |= Y2_IS_PHY_QLNK;
-		sky2_write32(hw, B0_IMSK, msk);
-
 		/* check if PSMv2 was running before */
 		reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
 		if (reg & PCI_EXP_LNKCTL_ASPMC)
@@ -3412,6 +3417,8 @@ static void sky2_all_down(struct sky2_hw *hw)
 
 	sky2_read32(hw, B0_IMSK);
 	sky2_write32(hw, B0_IMSK, 0);
+
+	if (hw->ports > 1 || netif_running(hw->dev[0]))
 		synchronize_irq(hw->pdev->irq);
 	napi_disable(&hw->napi);
 
@@ -3430,7 +3437,7 @@ static void sky2_all_down(struct sky2_hw *hw)
 
 static void sky2_all_up(struct sky2_hw *hw)
 {
-	u32 imask = Y2_IS_BASE;
+	u32 imask = 0;
 	int i;
 
 	for (i = 0; i < hw->ports; i++) {
@@ -3446,11 +3453,13 @@ static void sky2_all_up(struct sky2_hw *hw)
 		netif_wake_queue(dev);
 	}
 
+	if (imask || hw->ports > 1) {
+		imask |= Y2_IS_BASE;
 		sky2_write32(hw, B0_IMSK, imask);
 		sky2_read32(hw, B0_IMSK);
-
 		sky2_read32(hw, B0_Y2_SP_LISR);
 		napi_enable(&hw->napi);
+	}
 }
 
 static void sky2_restart(struct work_struct *work)