ARM: dts: sun8i: Adjust power key nodes

Several H3 and one H2+ board have power key nodes, which are slightly
off. Some are missing wakeup-source property and some have BTN_0 code
assigned instead of KEY_POWER.

Adjust them, so they can function as intended by designer.
Co-developed-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211129165510.370717-1-jernej.skrabec@gmail.com

arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts

@@ -52,8 +52,9 @@ gpio_keys {
 
 		sw4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/sun8i-h3-nanopi.dtsi

@@ -81,6 +81,7 @@ k1 {
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };

arch/arm/boot/dts/sun8i-h3-orangepi-2.dts

@@ -99,8 +99,9 @@ sw2 {
 
 		sw4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts

@@ -91,8 +91,9 @@ r_gpio_keys {
 
 		sw4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };

arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi

@@ -82,8 +82,9 @@ gpio_keys {
 
 		sw4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi

@@ -49,6 +49,7 @@ power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
 		};
 	};