crypto/nx: Add P9 NX specific error codes for 842 engine

This patch adds changes for checking P9 specific 842 engine
error codes. These errros are reported in coprocessor status
block (CSB) for failures.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/icswx.h

@@ -69,7 +69,10 @@ struct coprocessor_completion_block {
 #define CSB_CC_WR_PROTECTION	(16)
 #define CSB_CC_UNKNOWN_CODE	(17)
 #define CSB_CC_ABORT		(18)
+#define CSB_CC_EXCEED_BYTE_COUNT	(19)	/* P9 or later */
 #define CSB_CC_TRANSPORT	(20)
+#define CSB_CC_INVALID_CRB	(21)	/* P9 or later */
+#define CSB_CC_INVALID_DDE	(30)	/* P9 or later */
 #define CSB_CC_SEGMENTED_DDL	(31)
 #define CSB_CC_PROGRESS_POINT	(32)
 #define CSB_CC_DDE_OVERFLOW	(33)

drivers/crypto/nx/nx-842-powernv.c

@@ -243,6 +243,13 @@ static int wait_for_csb(struct nx842_workmem *wmem,
 	case CSB_CC_TEMPL_OVERFLOW:
 		CSB_ERR(csb, "Compressed data template shows data past end");
 		return -EINVAL;
+	case CSB_CC_EXCEED_BYTE_COUNT:	/* P9 or later */
+		/*
+		 * DDE byte count exceeds the limit specified in Maximum
+		 * byte count register.
+		 */
+		CSB_ERR(csb, "DDE byte count exceeds the limit");
+		return -EINVAL;
 
 	/* these should not happen */
 	case CSB_CC_INVALID_ALIGN:
@@ -284,9 +291,17 @@ static int wait_for_csb(struct nx842_workmem *wmem,
 		CSB_ERR(csb, "Too many DDEs in DDL");
 		return -EINVAL;
 	case CSB_CC_TRANSPORT:
+	case CSB_CC_INVALID_CRB:	/* P9 or later */
 		/* shouldn't happen, we setup CRB correctly */
 		CSB_ERR(csb, "Invalid CRB");
 		return -EINVAL;
+	case CSB_CC_INVALID_DDE:	/* P9 or later */
+		/*
+		 * shouldn't happen, setup_direct/indirect_dde creates
+		 * DDE right
+		 */
+		CSB_ERR(csb, "Invalid DDE");
+		return -EINVAL;
 	case CSB_CC_SEGMENTED_DDL:
 		/* shouldn't happen, setup_ddl creates DDL right */
 		CSB_ERR(csb, "Segmented DDL error");
@@ -330,6 +345,9 @@ static int wait_for_csb(struct nx842_workmem *wmem,
 	case CSB_CC_HW:
 		CSB_ERR(csb, "Correctable hardware error");
 		return -EPROTO;
+	case CSB_CC_HW_EXPIRED_TIMER:	/* P9 or later */
+		CSB_ERR(csb, "Job did not finish within allowed time");
+		return -EPROTO;
 
 	default:
 		CSB_ERR(csb, "Invalid CC %d", csb->cc);

drivers/crypto/nx/nx-842.h

@@ -76,9 +76,17 @@
 #define CSB_CC_DECRYPT_OVERFLOW	(64)
 /* asym crypt codes */
 #define CSB_CC_MINV_OVERFLOW	(128)
+/*
+ * HW error - Job did not finish in the maximum time allowed.
+ * Job terminated.
+ */
+#define CSB_CC_HW_EXPIRED_TIMER		(224)
 /* These are reserved for hypervisor use */
 #define CSB_CC_HYP_RESERVE_START	(240)
 #define CSB_CC_HYP_RESERVE_END		(253)
+#define CSB_CC_HYP_RESERVE_P9_END	(251)
+/* No valid interrupt server (P9 or later). */
+#define CSB_CC_HYP_RESERVE_NO_INTR_SERVER	(252)
 #define CSB_CC_HYP_NO_HW		(254)
 #define CSB_CC_HYP_HANG_ABORTED		(255)