Commit 14cdbf04 authored by Alexander Shishkin's avatar Alexander Shishkin Committed by Greg Kroah-Hartman

intel_th: Add PTI output driver

Parallel Trace Interface (PTI) unit is a trace output device that sends
data over a PTI port.

The driver provides interfaces to configure bus width, bus clock divider
and mode. Tracing is enabled via output device's "active" attribute.
Signed-off-by: default avatarAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ba82664c
What: /sys/bus/intel_th/devices/<intel_th_id>-pti/mode
Date: June 2015
KernelVersion: 4.3
Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Description: (RW) Configure PTI output width. Currently supported values
are 4, 8, 12, 16.
What: /sys/bus/intel_th/devices/<intel_th_id>-pti/freerunning_clock
Date: June 2015
KernelVersion: 4.3
Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Description: (RW) 0: PTI trace clock acts as a strobe which only toggles
when there is trace data to send. 1: PTI trace clock is a
free-running clock.
What: /sys/bus/intel_th/devices/<intel_th_id>-pti/clock_divider
Date: June 2015
KernelVersion: 4.3
Contact: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Description: (RW) Configure PTI port clock divider:
- 0: Intel TH clock rate,
- 1: 1/2 Intel TH clock rate,
- 2: 1/4 Intel TH clock rate,
- 3: 1/8 Intel TH clock rate.
......@@ -54,6 +54,15 @@ config INTEL_TH_MSU
Say Y here to enable MSU output device for Intel TH.
config INTEL_TH_PTI
tristate "Intel(R) Trace Hub PTI output"
help
Parallel Trace Interface unit (PTI) is a trace output device
of Intel TH architecture that facilitates STP trace output via
a PTI port.
Say Y to enable PTI output of Intel TH data.
config INTEL_TH_DEBUG
bool "Intel(R) Trace Hub debugging"
depends on DEBUG_FS
......
......@@ -13,3 +13,6 @@ intel_th_sth-y := sth.o
obj-$(CONFIG_INTEL_TH_MSU) += intel_th_msu.o
intel_th_msu-y := msu.o
obj-$(CONFIG_INTEL_TH_PTI) += intel_th_pti.o
intel_th_pti-y := pti.o
/*
* Intel(R) Trace Hub PTI output driver
*
* Copyright (C) 2014-2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/sizes.h>
#include <linux/printk.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/io.h>
#include "intel_th.h"
#include "pti.h"
struct pti_device {
void __iomem *base;
struct intel_th_device *thdev;
unsigned int mode;
unsigned int freeclk;
unsigned int clkdiv;
unsigned int patgen;
};
/* map PTI widths to MODE settings of PTI_CTL register */
static const unsigned int pti_mode[] = {
0, 4, 8, 0, 12, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0,
};
static int pti_width_mode(unsigned int width)
{
int i;
for (i = 0; i < ARRAY_SIZE(pti_mode); i++)
if (pti_mode[i] == width)
return i;
return -EINVAL;
}
static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pti_device *pti = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%d\n", pti_mode[pti->mode]);
}
static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct pti_device *pti = dev_get_drvdata(dev);
unsigned long val;
int ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
ret = pti_width_mode(val);
if (ret < 0)
return ret;
pti->mode = ret;
return size;
}
static DEVICE_ATTR_RW(mode);
static ssize_t
freerunning_clock_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pti_device *pti = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%d\n", pti->freeclk);
}
static ssize_t
freerunning_clock_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct pti_device *pti = dev_get_drvdata(dev);
unsigned long val;
int ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
pti->freeclk = !!val;
return size;
}
static DEVICE_ATTR_RW(freerunning_clock);
static ssize_t
clock_divider_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pti_device *pti = dev_get_drvdata(dev);
return scnprintf(buf, PAGE_SIZE, "%d\n", 1u << pti->clkdiv);
}
static ssize_t
clock_divider_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
struct pti_device *pti = dev_get_drvdata(dev);
unsigned long val;
int ret;
ret = kstrtoul(buf, 10, &val);
if (ret)
return ret;
if (!is_power_of_2(val) || val > 8 || !val)
return -EINVAL;
pti->clkdiv = val;
return size;
}
static DEVICE_ATTR_RW(clock_divider);
static struct attribute *pti_output_attrs[] = {
&dev_attr_mode.attr,
&dev_attr_freerunning_clock.attr,
&dev_attr_clock_divider.attr,
NULL,
};
static struct attribute_group pti_output_group = {
.attrs = pti_output_attrs,
};
static int intel_th_pti_activate(struct intel_th_device *thdev)
{
struct pti_device *pti = dev_get_drvdata(&thdev->dev);
u32 ctl = PTI_EN;
if (pti->patgen)
ctl |= pti->patgen << __ffs(PTI_PATGENMODE);
if (pti->freeclk)
ctl |= PTI_FCEN;
ctl |= pti->mode << __ffs(PTI_MODE);
ctl |= pti->clkdiv << __ffs(PTI_CLKDIV);
iowrite32(ctl, pti->base + REG_PTI_CTL);
intel_th_trace_enable(thdev);
return 0;
}
static void intel_th_pti_deactivate(struct intel_th_device *thdev)
{
struct pti_device *pti = dev_get_drvdata(&thdev->dev);
intel_th_trace_disable(thdev);
iowrite32(0, pti->base + REG_PTI_CTL);
}
static void read_hw_config(struct pti_device *pti)
{
u32 ctl = ioread32(pti->base + REG_PTI_CTL);
pti->mode = (ctl & PTI_MODE) >> __ffs(PTI_MODE);
pti->clkdiv = (ctl & PTI_CLKDIV) >> __ffs(PTI_CLKDIV);
pti->freeclk = !!(ctl & PTI_FCEN);
if (!pti_mode[pti->mode])
pti->mode = pti_width_mode(4);
if (!pti->clkdiv)
pti->clkdiv = 1;
}
static int intel_th_pti_probe(struct intel_th_device *thdev)
{
struct device *dev = &thdev->dev;
struct resource *res;
struct pti_device *pti;
void __iomem *base;
int ret;
res = intel_th_device_get_resource(thdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
base = devm_ioremap(dev, res->start, resource_size(res));
if (IS_ERR(base))
return PTR_ERR(base);
pti = devm_kzalloc(dev, sizeof(*pti), GFP_KERNEL);
if (!pti)
return -ENOMEM;
pti->thdev = thdev;
pti->base = base;
read_hw_config(pti);
ret = sysfs_create_group(&dev->kobj, &pti_output_group);
if (ret)
return ret;
dev_set_drvdata(dev, pti);
return 0;
}
static void intel_th_pti_remove(struct intel_th_device *thdev)
{
}
static struct intel_th_driver intel_th_pti_driver = {
.probe = intel_th_pti_probe,
.remove = intel_th_pti_remove,
.activate = intel_th_pti_activate,
.deactivate = intel_th_pti_deactivate,
.driver = {
.name = "pti",
.owner = THIS_MODULE,
},
};
module_driver(intel_th_pti_driver,
intel_th_driver_register,
intel_th_driver_unregister);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel(R) Trace Hub PTI output driver");
MODULE_AUTHOR("Alexander Shishkin <alexander.shishkin@linux.intel.com>");
/*
* Intel(R) Trace Hub PTI output data structures
*
* Copyright (C) 2014-2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#ifndef __INTEL_TH_STH_H__
#define __INTEL_TH_STH_H__
enum {
REG_PTI_CTL = 0x1c00,
};
#define PTI_EN BIT(0)
#define PTI_FCEN BIT(1)
#define PTI_MODE 0xf0
#define PTI_CLKDIV 0x000f0000
#define PTI_PATGENMODE 0x00f00000
#endif /* __INTEL_TH_STH_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment