Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:

   - OpenFirmware/DeviceTree support for the Power Supply core: the core
     now automatically populates supplied_from hierarchy from the device
     tree.  With these patches chargers and batteries can now lookup
     each other without the board files support shim.  Rhyland Klein at
     NVIDIA did the work

   - New ST-Ericsson ABX500 hwmon driver.  The driver is heavily using
     the AB85xx core and depends on some recent changes to it, so that
     is why the driver comes through the battery tree.  It has an
     appropriate ack from the hwmon maintainer (i.e.  Guenter Roeck).
     Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored
     the driver

   - Final bits to sync AB85xx ST-Ericsson changes into mainline.  The
     changes touch mfd parts, but these were acked by the appropriate
     MFD maintainer (ie Samuel Ortiz).  Lee Jones at Linaro did most of
     the work and lead the submission process.

  Minor changes, but still worth mentioning:

   - Battery temperature reporting fix for Nokia N900 phones
   - Versatile Express poweroff driver moved into drivers/power/reset/
   - Tree-wide: use devm_kzalloc() where appropriate
   - Tree-wide: dev_pm_ops cleanups/fixes"

* tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits)
  pm2301-charger: Fix suspend/resume
  charger-manager: Use kmemdup instead of kzalloc + memcpy
  power_supply: Populate supplied_from hierarchy from the device tree
  power_supply: Add core support for supplied_from
  power_supply: Define Binding for power-supplies
  rx51_battery: Fix reporting temperature
  hwmon: Add ST-Ericsson ABX500 hwmon driver
  ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
  ab8500_{bmdata,fg}: Add const attributes to some data arrays
  ab8500_bmdata: Eliminate CamelCase warning of some variables
  ab8500_btemp: Make ab8500_btemp_get* interfaces public
  goldfish_battery: Use resource_size()
  lp8788-charger: Use PAGE_SIZE for the sysfs read operation
  max8925_power: Use devm_kzalloc()
  da9030_battery: Use devm_kzalloc()
  da9052-battery: Use devm_kzalloc()
  ds2760_battery: Use devm_kzalloc()
  ds2780_battery: Use devm_kzalloc()
  gpio-charger: Use devm_kzalloc()
  isp1704_charger: Use devm_kzalloc()
  ...

Documentation/devicetree/bindings/power_supply/power_supply.txt

+Power Supply Core Support
+
+Optional Properties:
+ - power-supplies : This property is added to a supply in order to list the
+   devices which supply it power, referenced by their phandles.
+
+Example:
+
+	usb-charger: power@e {
+		compatible = "some,usb-charger";
+		...
+	};
+
+	ac-charger: power@c {
+		compatible = "some,ac-charger";
+		...
+	};
+
+	battery@b {
+		compatible = "some,battery";
+		...
+		power-supplies = <&usb-charger>, <&ac-charger>;
+	};

Documentation/devicetree/bindings/power_supply/tps65090.txt

+TPS65090 Frontend PMU with Switchmode Charger
+
+Required Properties:
+-compatible: "ti,tps65090-charger"
+
+Optional Properties:
+-ti,enable-low-current-chrg: Enables charging when a low current is detected
+ while the default logic is to stop charging.
+
+This node is a subnode of the tps65090 PMIC.
+
+Example:
+
+	tps65090-charger {
+		compatible = "ti,tps65090-charger";
+		ti,enable-low-current-chrg;
+	};

Documentation/hwmon/ab8500

+Kernel driver ab8500
+====================
+
+Supported chips:
+  * ST-Ericsson AB8500
+    Prefix: 'ab8500'
+    Addresses scanned: -
+    Datasheet: http://www.stericsson.com/developers/documentation.jsp
+
+Authors:
+        Martin Persson <martin.persson@stericsson.com>
+        Hongbo Zhang <hongbo.zhang@linaro.org>
+
+Description
+-----------
+
+See also Documentation/hwmon/abx500. This is the ST-Ericsson AB8500 specific
+driver.
+
+Currently only the AB8500 internal sensor and one external sensor for battery
+temperature are monitored. Other GPADC channels can also be monitored if needed
+in future.

Documentation/hwmon/abx500

+Kernel driver abx500
+====================
+
+Supported chips:
+  * ST-Ericsson ABx500 series
+    Prefix: 'abx500'
+    Addresses scanned: -
+    Datasheet: http://www.stericsson.com/developers/documentation.jsp
+
+Authors:
+        Martin Persson <martin.persson@stericsson.com>
+        Hongbo Zhang <hongbo.zhang@linaro.org>
+
+Description
+-----------
+
+Every ST-Ericsson Ux500 SOC consists of both ABx500 and DBx500 physically,
+this is kernel hwmon driver for ABx500.
+
+There are some GPADCs inside ABx500 which are designed for connecting to
+thermal sensors, and there is also a thermal sensor inside ABx500 too, which
+raises interrupt when critical temperature reached.
+
+This abx500 is a common layer which can monitor all of the sensors, every
+specific abx500 chip has its special configurations in its own file, e.g. some
+sensors can be configured invisible if they are not available on that chip, and
+the corresponding gpadc_addr should be set to 0, thus this sensor won't be
+polled.

arch/arm/mach-vexpress/Kconfig

@@ -17,6 +17,9 @@ config ARCH_VEXPRESS
 	select NO_IOPORT
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
+	select POWER_RESET
+	select POWER_RESET_VEXPRESS
+	select POWER_SUPPLY
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select VEXPRESS_CONFIG
 	help

arch/arm/mach-vexpress/Makefile

@@ -4,7 +4,7 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= v2m.o reset.o
+obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o

arch/arm/mach-vexpress/v2m.c

@@ -363,8 +363,6 @@ static void __init v2m_init(void)
 	for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
 		amba_device_register(v2m_amba_devs[i], &iomem_resource);
 
-	pm_power_off = vexpress_power_off;
-
 	ct_desc->init_tile();
 }
 
@@ -376,7 +374,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
 	.init_irq	= v2m_init_irq,
 	.init_time	= v2m_timer_init,
 	.init_machine	= v2m_init,
-	.restart	= vexpress_restart,
 MACHINE_END
 
 static struct map_desc v2m_rs1_io_desc __initdata = {
@@ -470,7 +467,6 @@ static void __init v2m_dt_init(void)
 {
 	l2x0_of_init(0x00400000, 0xfe0fffff);
 	of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL);
-	pm_power_off = vexpress_power_off;
 }
 
 static const char * const v2m_dt_match[] __initconst = {
@@ -487,5 +483,4 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
 	.init_irq	= irqchip_init,
 	.init_time	= v2m_dt_timer_init,
 	.init_machine	= v2m_dt_init,
-	.restart	= vexpress_restart,
 MACHINE_END

drivers/hwmon/Kconfig

@@ -39,6 +39,19 @@ config HWMON_DEBUG_CHIP
 
 comment "Native drivers"
 
+config SENSORS_AB8500
+	tristate "AB8500 thermal monitoring"
+	depends on AB8500_GPADC && AB8500_BM
+	default n
+	help
+	  If you say yes here you get support for the thermal sensor part
+	  of the AB8500 chip. The driver includes thermal management for
+	  AB8500 die and two GPADC channels. The GPADC channel are preferably
+	  used to access sensors outside the AB8500 chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called abx500-temp.
+
 config SENSORS_ABITUGURU
 	tristate "Abit uGuru (rev 1 & 2)"
 	depends on X86 && DMI

drivers/hwmon/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_SENSORS_W83795)	+= w83795.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
+obj-$(CONFIG_SENSORS_AB8500)	+= abx500.o ab8500.o
 obj-$(CONFIG_SENSORS_ABITUGURU)	+= abituguru.o
 obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
 obj-$(CONFIG_SENSORS_AD7314)	+= ad7314.o

drivers/hwmon/ab8500.c

+/*
+ * Copyright (C) ST-Ericsson 2010 - 2013
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ *         Hongbo Zhang <hongbo.zhang@linaro.org>
+ * License Terms: GNU General Public License v2
+ *
+ * When the AB8500 thermal warning temperature is reached (threshold cannot
+ * be changed by SW), an interrupt is set, and if no further action is taken
+ * within a certain time frame, pm_power off will be called.
+ *
+ * When AB8500 thermal shutdown temperature is reached a hardware shutdown of
+ * the AB8500 will occur.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power/ab8500.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include "abx500.h"
+
+#define DEFAULT_POWER_OFF_DELAY	(HZ * 10)
+#define THERMAL_VCC		1800
+#define PULL_UP_RESISTOR	47000
+/* Number of monitored sensors should not greater than NUM_SENSORS */
+#define NUM_MONITORED_SENSORS	4
+
+struct ab8500_gpadc_cfg {
+	const struct abx500_res_to_temp *temp_tbl;
+	int tbl_sz;
+	int vcc;
+	int r_up;
+};
+
+struct ab8500_temp {
+	struct ab8500_gpadc *gpadc;
+	struct ab8500_btemp *btemp;
+	struct delayed_work power_off_work;
+	struct ab8500_gpadc_cfg cfg;
+	struct abx500_temp *abx500_data;
+};
+
+/*
+ * The hardware connection is like this:
+ * VCC----[ R_up ]-----[ NTC ]----GND
+ * where R_up is pull-up resistance, and GPADC measures voltage on NTC.
+ * and res_to_temp table is strictly sorted by falling resistance values.
+ */
+static int ab8500_voltage_to_temp(struct ab8500_gpadc_cfg *cfg,
+		int v_ntc, int *temp)
+{
+	int r_ntc, i = 0, tbl_sz = cfg->tbl_sz;
+	const struct abx500_res_to_temp *tbl = cfg->temp_tbl;
+
+	if (cfg->vcc < 0 || v_ntc >= cfg->vcc)
+		return -EINVAL;
+
+	r_ntc = v_ntc * cfg->r_up / (cfg->vcc - v_ntc);
+	if (r_ntc > tbl[0].resist || r_ntc < tbl[tbl_sz - 1].resist)
+		return -EINVAL;
+
+	while (!(r_ntc <= tbl[i].resist && r_ntc > tbl[i + 1].resist) &&
+			i < tbl_sz - 2)
+		i++;
+
+	/* return milli-Celsius */
+	*temp = tbl[i].temp * 1000 + ((tbl[i + 1].temp - tbl[i].temp) * 1000 *
+		(r_ntc - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
+
+	return 0;
+}
+
+static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
+{
+	int voltage, ret;
+	struct ab8500_temp *ab8500_data = data->plat_data;
+
+	if (sensor == BAT_CTRL) {
+		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
+	} else if (sensor == BTEMP_BALL) {
+		*temp = ab8500_btemp_get_temp(ab8500_data->btemp);
+	} else {
+		voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor);
+		if (voltage < 0)
+			return voltage;
+
+		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void ab8500_thermal_power_off(struct work_struct *work)
+{
+	struct ab8500_temp *ab8500_data = container_of(work,
+				struct ab8500_temp, power_off_work.work);
+	struct abx500_temp *abx500_data = ab8500_data->abx500_data;
+
+	dev_warn(&abx500_data->pdev->dev, "Power off due to critical temp\n");
+
+	pm_power_off();
+}
+
+static ssize_t ab8500_show_name(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	return sprintf(buf, "ab8500\n");
+}
+
+static ssize_t ab8500_show_label(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	char *label;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int index = attr->index;
+
+	switch (index) {
+	case 1:
+		label = "ext_adc1";
+		break;
+	case 2:
+		label = "ext_adc2";
+		break;
+	case 3:
+		label = "bat_temp";
+		break;
+	case 4:
+		label = "bat_ctrl";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return sprintf(buf, "%s\n", label);
+}
+
+static int ab8500_temp_irq_handler(int irq, struct abx500_temp *data)
+{
+	struct ab8500_temp *ab8500_data = data->plat_data;
+
+	dev_warn(&data->pdev->dev, "Power off in %d s\n",
+		 DEFAULT_POWER_OFF_DELAY / HZ);
+
+	schedule_delayed_work(&ab8500_data->power_off_work,
+		DEFAULT_POWER_OFF_DELAY);
+	return 0;
+}
+
+int abx500_hwmon_init(struct abx500_temp *data)
+{
+	struct ab8500_temp *ab8500_data;
+
+	ab8500_data = devm_kzalloc(&data->pdev->dev, sizeof(*ab8500_data),
+		GFP_KERNEL);
+	if (!ab8500_data)
+		return -ENOMEM;
+
+	ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	if (IS_ERR(ab8500_data->gpadc))
+		return PTR_ERR(ab8500_data->gpadc);
+
+	ab8500_data->btemp = ab8500_btemp_get();
+	if (IS_ERR(ab8500_data->btemp))
+		return PTR_ERR(ab8500_data->btemp);
+
+	INIT_DELAYED_WORK(&ab8500_data->power_off_work,
+			  ab8500_thermal_power_off);
+
+	ab8500_data->cfg.vcc = THERMAL_VCC;
+	ab8500_data->cfg.r_up = PULL_UP_RESISTOR;
+	ab8500_data->cfg.temp_tbl = ab8500_temp_tbl_a_thermistor;
+	ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
+
+	data->plat_data = ab8500_data;
+
+	/*
+	 * ADC_AUX1 and ADC_AUX2, connected to external NTC
+	 * BTEMP_BALL and BAT_CTRL, fixed usage
+	 */
+	data->gpadc_addr[0] = ADC_AUX1;
+	data->gpadc_addr[1] = ADC_AUX2;
+	data->gpadc_addr[2] = BTEMP_BALL;
+	data->gpadc_addr[3] = BAT_CTRL;
+	data->monitored_sensors = NUM_MONITORED_SENSORS;
+
+	data->ops.read_sensor = ab8500_read_sensor;
+	data->ops.irq_handler = ab8500_temp_irq_handler;
+	data->ops.show_name = ab8500_show_name;
+	data->ops.show_label = ab8500_show_label;
+	data->ops.is_visible = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(abx500_hwmon_init);
+
+MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@linaro.org>");
+MODULE_DESCRIPTION("AB8500 temperature driver");
+MODULE_LICENSE("GPL");

drivers/hwmon/abx500.h

+/*
+ * Copyright (C) ST-Ericsson 2010 - 2013
+ * License terms: GNU General Public License v2
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ *         Hongbo Zhang <hongbo.zhang@linaro.com>
+ */
+
+#ifndef _ABX500_H
+#define _ABX500_H
+
+#define NUM_SENSORS 5
+
+struct abx500_temp;
+
+/*
+ * struct abx500_temp_ops - abx500 chip specific ops
+ * @read_sensor: reads gpadc output
+ * @irq_handler: irq handler
+ * @show_name: hwmon device name
+ * @show_label: hwmon attribute label
+ * @is_visible: is attribute visible
+ */
+struct abx500_temp_ops {
+	int (*read_sensor)(struct abx500_temp *, u8, int *);
+	int (*irq_handler)(int, struct abx500_temp *);
+	ssize_t (*show_name)(struct device *,
+			struct device_attribute *, char *);
+	ssize_t (*show_label) (struct device *,
+			struct device_attribute *, char *);
+	int (*is_visible)(struct attribute *, int);
+};
+
+/*
+ * struct abx500_temp - representation of temp mon device
+ * @pdev: platform device
+ * @hwmon_dev: hwmon device
+ * @ops: abx500 chip specific ops
+ * @gpadc_addr: gpadc channel address
+ * @min: sensor temperature min value
+ * @max: sensor temperature max value
+ * @max_hyst: sensor temperature hysteresis value for max limit
+ * @min_alarm: sensor temperature min alarm
+ * @max_alarm: sensor temperature max alarm
+ * @work: delayed work scheduled to monitor temperature periodically
+ * @work_active: True if work is active
+ * @lock: mutex
+ * @monitored_sensors: number of monitored sensors
+ * @plat_data: private usage, usually points to platform specific data
+ */
+struct abx500_temp {
+	struct platform_device *pdev;
+	struct device *hwmon_dev;
+	struct abx500_temp_ops ops;
+	u8 gpadc_addr[NUM_SENSORS];
+	unsigned long min[NUM_SENSORS];
+	unsigned long max[NUM_SENSORS];
+	unsigned long max_hyst[NUM_SENSORS];
+	bool min_alarm[NUM_SENSORS];
+	bool max_alarm[NUM_SENSORS];
+	struct delayed_work work;
+	bool work_active;
+	struct mutex lock;
+	int monitored_sensors;
+	void *plat_data;
+};
+
+int abx500_hwmon_init(struct abx500_temp *data);
+
+#endif /* _ABX500_H */

drivers/mfd/ab8500-sysctrl.c

@@ -15,19 +15,30 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-sysctrl.h>
 
+/* RtcCtrl bits */
+#define AB8500_ALARM_MIN_LOW  0x08
+#define AB8500_ALARM_MIN_MID 0x09
+#define RTC_CTRL 0x0B
+#define RTC_ALARM_ENABLE 0x4
+
 static struct device *sysctrl_dev;
 
 void ab8500_power_off(void)
 {
 	sigset_t old;
 	sigset_t all;
-	static char *pss[] = {"ab8500_ac", "ab8500_usb"};
+	static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
 	int i;
 	bool charger_present = false;
 	union power_supply_propval val;
 	struct power_supply *psy;
 	int ret;
 
+	if (sysctrl_dev == NULL) {
+		pr_err("%s: sysctrl not initialized\n", __func__);
+		return;
+	}
+
 	/*
 	 * If we have a charger connected and we're powering off,
 	 * reboot into charge-only mode.
@@ -74,6 +85,63 @@ void ab8500_power_off(void)
 	}
 }
 
+/*
+ * Use the AB WD to reset the platform. It will perform a hard
+ * reset instead of a soft reset. Write the reset reason to
+ * the AB before reset, which can be read upon restart.
+ */
+void ab8500_restart(char mode, const char *cmd)
+{
+	struct ab8500_platform_data *plat;
+	struct ab8500_sysctrl_platform_data *pdata;
+	u16 reason = 0;
+	u8 val;
+
+	if (sysctrl_dev == NULL) {
+		pr_err("%s: sysctrl not initialized\n", __func__);
+		return;
+	}
+
+	plat = dev_get_platdata(sysctrl_dev->parent);
+	pdata = plat->sysctrl;
+	if (pdata->reboot_reason_code)
+		reason = pdata->reboot_reason_code(cmd);
+	else
+		pr_warn("[%s] No reboot reason set. Default reason %d\n",
+			__func__, reason);
+
+	/*
+	 * Disable RTC alarm, just a precaution so that no alarm
+	 * is running when WD reset is executed.
+	 */
+	abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
+		RTC_CTRL , &val);
+	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+		RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
+
+	/*
+	 * Android is not using the RTC alarm registers during reboot
+	 * so we borrow them for writing the reason of reset
+	 */
+
+	/* reason[8 LSB] */
+	val = reason & 0xFF;
+	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+		AB8500_ALARM_MIN_LOW , val);
+
+	/* reason[8 MSB] */
+	val = (reason>>8) & 0xFF;
+	abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
+		AB8500_ALARM_MIN_MID , val);
+
+	/* Setting WD timeout to 0 */
+	ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
+
+	/* Setting the parameters to AB8500 WD*/
+	ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
+		AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
+}
+
 static inline bool valid_bank(u8 bank)
 {
 	return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
@@ -85,7 +153,7 @@ int ab8500_sysctrl_read(u16 reg, u8 *value)
 	u8 bank;
 
 	if (sysctrl_dev == NULL)
-		return -EAGAIN;
+		return -EINVAL;
 
 	bank = (reg >> 8);
 	if (!valid_bank(bank))
@@ -101,7 +169,7 @@ int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value)
 	u8 bank;
 
 	if (sysctrl_dev == NULL)
-		return -EAGAIN;
+		return -EINVAL;
 
 	bank = (reg >> 8);
 	if (!valid_bank(bank))
@@ -114,28 +182,36 @@ EXPORT_SYMBOL(ab8500_sysctrl_write);
 
 static int ab8500_sysctrl_probe(struct platform_device *pdev)
 {
+	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_platform_data *plat;
 	struct ab8500_sysctrl_platform_data *pdata;
 
-	sysctrl_dev = &pdev->dev;
 	plat = dev_get_platdata(pdev->dev.parent);
+
+	if (!(plat && plat->sysctrl))
+		return -EINVAL;
+
 	if (plat->pm_power_off)
 		pm_power_off = ab8500_power_off;
 
 	pdata = plat->sysctrl;
 
 	if (pdata) {
-		int ret, i, j;
+		int last, ret, i, j;
+
+		if (is_ab8505(ab8500))
+			last = AB8500_SYSCLKREQ4RFCLKBUF;
+		else
+			last = AB8500_SYSCLKREQ8RFCLKBUF;
 
-		for (i = AB8500_SYSCLKREQ1RFCLKBUF;
-		     i <= AB8500_SYSCLKREQ8RFCLKBUF; i++) {
+		for (i = AB8500_SYSCLKREQ1RFCLKBUF; i <= last; i++) {
 			j = i - AB8500_SYSCLKREQ1RFCLKBUF;
 			ret = ab8500_sysctrl_write(i, 0xff,
-						   pdata->initial_req_buf_config[j]);
+					pdata->initial_req_buf_config[j]);
 			dev_dbg(&pdev->dev,
-				"Setting SysClkReq%dRfClkBuf 0x%X\n",
-				j + 1,
-				pdata->initial_req_buf_config[j]);
+					"Setting SysClkReq%dRfClkBuf 0x%X\n",
+					j + 1,
+					pdata->initial_req_buf_config[j]);
 			if (ret < 0) {
 				dev_err(&pdev->dev,
 					"unable to set sysClkReq%dRfClkBuf: "

drivers/power/88pm860x_charger.c

@@ -714,7 +714,6 @@ static int pm860x_charger_probe(struct platform_device *pdev)
 	while (--i >= 0)
 		free_irq(info->irq[i], info);
 out:
-	kfree(info);
 	return ret;
 }
 
@@ -728,7 +727,6 @@ static int pm860x_charger_remove(struct platform_device *pdev)
 	free_irq(info->irq[0], info);
 	for (i = 0; i < info->irq_nums; i++)
 		free_irq(info->irq[i], info);
-	kfree(info);
 	return 0;
 }
 

drivers/power/Kconfig

@@ -340,6 +340,13 @@ config CHARGER_SMB347
 	  Say Y to include support for Summit Microelectronics SMB347
 	  Battery Charger.
 
+config CHARGER_TPS65090
+	tristate "TPS65090 battery charger driver"
+	depends on MFD_TPS65090
+	help
+	 Say Y here to enable support for battery charging with TPS65090
+	 PMIC chips.
+
 config AB8500_BM
 	bool "AB8500 Battery Management Driver"
 	depends on AB8500_CORE && AB8500_GPADC
@@ -353,13 +360,6 @@ config BATTERY_GOLDFISH
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.
 
-config CHARGER_PM2301
-	bool "PM2301 Battery Charger Driver"
-	depends on AB8500_BM
-	help
-	  Say Y to include support for PM2301 charger driver.
-	  Depends on AB8500 battery management core.
-
 source "drivers/power/reset/Kconfig"
 
 endif # POWER_SUPPLY

drivers/power/Makefile

@@ -39,7 +39,7 @@ obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
 obj-$(CONFIG_BATTERY_RX51)	+= rx51_battery.o
-obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM)		+= ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
 obj-$(CONFIG_CHARGER_ISP1704)	+= isp1704_charger.o
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
@@ -47,10 +47,10 @@ obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
 obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
-obj-$(CONFIG_CHARGER_PM2301)	+= pm2301_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_POWER_AVS)		+= avs/
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
+obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
 obj-$(CONFIG_POWER_RESET)	+= reset/

drivers/power/charger-manager.c

@@ -1485,13 +1485,12 @@ static int charger_manager_probe(struct platform_device *pdev)
 
 	/* Basic Values. Unspecified are Null or 0 */
 	cm->dev = &pdev->dev;
-	cm->desc = kzalloc(sizeof(struct charger_desc), GFP_KERNEL);
+	cm->desc = kmemdup(desc, sizeof(struct charger_desc), GFP_KERNEL);
 	if (!cm->desc) {
 		dev_err(&pdev->dev, "Cannot allocate memory.\n");
 		ret = -ENOMEM;
 		goto err_alloc_desc;
 	}
-	memcpy(cm->desc, desc, sizeof(struct charger_desc));
 	cm->last_temp_mC = INT_MIN; /* denotes "unmeasured, yet" */
 
 	/*

drivers/power/da9030_battery.c

@@ -505,7 +505,7 @@ static int da9030_battery_probe(struct platform_device *pdev)
 	    pdata->charge_millivolt > 4350)
 		return -EINVAL;
 
-	charger = kzalloc(sizeof(*charger), GFP_KERNEL);
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
 	if (charger == NULL)
 		return -ENOMEM;
 
@@ -557,8 +557,6 @@ static int da9030_battery_probe(struct platform_device *pdev)
 	cancel_delayed_work(&charger->work);
 
 err_charger_init:
-	kfree(charger);
-
 	return ret;
 }
 
@@ -575,8 +573,6 @@ static int da9030_battery_remove(struct platform_device *dev)
 	da9030_set_charge(charger, 0);
 	power_supply_unregister(&charger->psy);
 
-	kfree(charger);
-
 	return 0;
 }
 

drivers/power/da9052-battery.c

@@ -594,7 +594,8 @@ static s32 da9052_bat_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	bat = kzalloc(sizeof(struct da9052_battery), GFP_KERNEL);
+	bat = devm_kzalloc(&pdev->dev, sizeof(struct da9052_battery),
+				GFP_KERNEL);
 	if (!bat)
 		return -ENOMEM;
 
@@ -635,7 +636,6 @@ static s32 da9052_bat_probe(struct platform_device *pdev)
 	while (--i >= 0)
 		da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
 
-	kfree(bat);
 	return ret;
 }
 static int da9052_bat_remove(struct platform_device *pdev)
@@ -647,7 +647,6 @@ static int da9052_bat_remove(struct platform_device *pdev)
 		da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
 
 	power_supply_unregister(&bat->psy);
-	kfree(bat);
 
 	return 0;
 }

drivers/power/ds2760_battery.c

@@ -512,7 +512,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	int retval = 0;
 	struct ds2760_device_info *di;
 
-	di = kzalloc(sizeof(*di), GFP_KERNEL);
+	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
 	if (!di) {
 		retval = -ENOMEM;
 		goto di_alloc_failed;
@@ -576,7 +576,6 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 workqueue_failed:
 	power_supply_unregister(&di->bat);
 batt_failed:
-	kfree(di);
 di_alloc_failed:
 success:
 	return retval;
@@ -590,7 +589,6 @@ static int ds2760_battery_remove(struct platform_device *pdev)
 	cancel_delayed_work_sync(&di->set_charged_work);
 	destroy_workqueue(di->monitor_wqueue);
 	power_supply_unregister(&di->bat);
-	kfree(di);
 
 	return 0;
 }

drivers/power/ds2780_battery.c

@@ -760,7 +760,7 @@ static int ds2780_battery_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct ds2780_device_info *dev_info;
 
-	dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
+	dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
 	if (!dev_info) {
 		ret = -ENOMEM;
 		goto fail;
@@ -779,7 +779,7 @@ static int ds2780_battery_probe(struct platform_device *pdev)
 	ret = power_supply_register(&pdev->dev, &dev_info->bat);
 	if (ret) {
 		dev_err(dev_info->dev, "failed to register battery\n");
-		goto fail_free_info;
+		goto fail;
 	}
 
 	ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
@@ -813,8 +813,6 @@ static int ds2780_battery_probe(struct platform_device *pdev)
 	sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2780_attr_group);
 fail_unregister:
 	power_supply_unregister(&dev_info->bat);
-fail_free_info:
-	kfree(dev_info);
 fail:
 	return ret;
 }
@@ -828,7 +826,6 @@ static int ds2780_battery_remove(struct platform_device *pdev)
 
 	power_supply_unregister(&dev_info->bat);
 
-	kfree(dev_info);
 	return 0;
 }
 

drivers/power/reset/Makefile

 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
-obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
\ No newline at end of file
+obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
+obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o