Merge tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - Amphenol ChipCap 2
   - ASPEED g6 PWM/Fan tach
   - Astera Labs PT5161L retimer
   - ASUS ROG RYUJIN II 360 AIO cooler
   - LTC4282
   - Microsoft Surface devices
   - MPS MPQ8785 Synchronous Step-Down Converter
   - NZXT Kraken X and Z series AIO CPU coolers

  Additional chip support in existing drivers:
   - Ayaneo Air Plus 7320u (oxp-sensors)
   - INA260 (ina2xx)
   - XPS 9315 (dell-smm)
   - MSI customer ID (nct6683)

  Devicetree bindings updates:
   - Common schema for hardware monitoring devices
   - Common schema for fans
   - Update chip descriptions to use common schema
   - Document regulator properties in several drivers
   - Explicit bindings for infineon buck converters

  Other improvements:
   - Replaced rbtree with maple tree register cache in several drivers
   - Added support for humidity min/max alarm and volatage fault
     attributes to hwmon core
   - Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
     detect()
   - Dropped obsolete and redundant entried from MAINTAINERS
   - Cleaned up axi-fan-control and coretemp drivers
   - Minor fixes and improvements in several other drivers"

* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
  hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
  hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
  dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
  dt-bindings: hwmon: fan: Add fan binding to schema
  dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
  hwmon: (amc6821) add of_match table
  dt-bindings: hwmon: lm75: use common hwmon schema
  hwmon: (sis5595) drop unused DIV_TO_REG function
  dt-bindings: hwmon: reference common hwmon schema
  dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
  dt-bindings: hwmon: adi,adm1275: use common hwmon schema
  dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
  dt-bindings: hwmon: add common properties
  hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
  hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
  regulator: dt-bindings: promote infineon buck converters to their own binding
  dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
  dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
  MAINTAINERS: Drop redundant hwmon entries
  ...

Documentation/ABI/testing/sysfs-class-hwmon

@@ -149,6 +149,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/inY_fault
+Description:
+		Reports a voltage hard failure (eg: shorted component)
+
+		- 1: Failed
+		- 0: Ok
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/cpuY_vid
 Description:
 		CPU core reference voltage.
@@ -968,6 +977,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_max_alarm
+Description:
+		Maximum humidity detection
+
+		- 0: OK
+		- 1: Maximum humidity detected
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/humidityY_max_hyst
 Description:
 		Humidity hysteresis value for max limit.
@@ -987,6 +1005,15 @@ Description:
 
 		RW
 
+What:		/sys/class/hwmon/hwmonX/humidityY_min_alarm
+Description:
+		Minimum humidity detection
+
+		- 0: OK
+		- 1: Minimum humidity detected
+
+		RO
+
 What:		/sys/class/hwmon/hwmonX/humidityY_min_hyst
 Description:
 		Humidity hysteresis value for min limit.

Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml

@@ -46,7 +46,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml

@@ -33,10 +33,6 @@ properties:
   reg:
     maxItems: 1
 
-  shunt-resistor-micro-ohms:
-    description:
-      Shunt resistor value in micro-Ohm.
-
   adi,volt-curr-sample-average:
     description: |
       Number of samples to be used to report voltage and current values.
@@ -50,6 +46,7 @@ properties:
     enum: [1, 2, 4, 8, 16, 32, 64, 128]
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       properties:
         compatible:
@@ -107,7 +104,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml

@@ -31,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc4282
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,rsense-nano-ohms:
+    description: Value of the sense resistor.
+
+  adi,vin-mode-microvolt:
+    description:
+      Selects operating range for the Undervoltage, Overvoltage and Foldback
+      pins. Also for the ADC. Should be set to the nominal input voltage.
+    enum: [3300000, 5000000, 12000000, 24000000]
+    default: 12000000
+
+  adi,fet-bad-timeout-ms:
+    description:
+      From the moment a FET bad conditions is present, this property selects the
+      wait time/timeout for a FET-bad fault to be signaled. Setting this to 0,
+      disables FET bad faults to be reported.
+    default: 255
+    maximum: 255
+
+  adi,overvoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,undervoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,current-limit-sense-microvolt:
+    description:
+      The current limit sense voltage of the chip is adjustable between
+      12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current
+      on the load.
+    enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375]
+    default: 25000
+
+  adi,overcurrent-retry:
+    description:
+      If set, enables the chip to auto-retry 256 timer cycles after an
+      Overcurrent fault.
+    type: boolean
+
+  adi,overvoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Overvoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,undervoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Undervoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,fault-log-enable:
+    description:
+      If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written
+      to the EEPROM when a fault bit transitions high and hence, will be
+      available after a power cycle (the chip loads the contents of
+      the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot).
+    type: boolean
+
+  adi,gpio1-mode:
+    description: Defines the function of the Pin. It can indicate that power is
+      good (PULL the pin low when power is not good) or that power is bad (Go
+      into high-z when power is not good).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [power_bad, power_good]
+    default: power_good
+
+  adi,gpio2-mode:
+    description: Defines the function of the Pin. It can be set as the input for
+      the ADC or indicating that the MOSFET is in stress (dissipating power).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [adc_input, stress_fet]
+    default: adc_input
+
+  adi,gpio3-monitor-enable:
+    description: If set, gpio3 is set as input for the ADC instead of gpio2.
+    type: boolean
+
+allOf:
+  - if:
+      required:
+        - adi,gpio3-monitor-enable
+    then:
+      properties:
+        adi,gpio2-mode:
+          const: stress_fet
+
+required:
+  - compatible
+  - reg
+  - adi,rsense-nano-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@50 {
+            compatible = "adi,ltc4282";
+            reg = <0x50>;
+            adi,rsense-nano-ohms = <500>;
+
+            adi,gpio1-mode = "power_good";
+            adi,gpio2-mode = "adc_input";
+        };
+    };
+...

Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipCap 2 humidity and temperature iio sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  Relative humidity and temperature sensor on I2C bus.
+
+  Datasheets:
+    https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+properties:
+  compatible:
+    oneOf:
+      - const: amphenol,cc2d23
+      - items:
+          - enum:
+              - amphenol,cc2d23s
+              - amphenol,cc2d25
+              - amphenol,cc2d25s
+              - amphenol,cc2d33
+              - amphenol,cc2d33s
+              - amphenol,cc2d35
+              - amphenol,cc2d35s
+          - const: amphenol,cc2d23
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: measurement ready indicator
+      - description: low humidity alarm
+      - description: high humidity alarm
+
+  interrupt-names:
+    items:
+      - const: ready
+      - const: low
+      - const: high
+
+  vdd-supply:
+    description:
+      Dedicated, controllable supply-regulator to reset the device and
+      enter in command mode.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@28 {
+            compatible = "amphenol,cc2d23s", "amphenol,cc2d23";
+            reg = <0x28>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>,
+                         <5 IRQ_TYPE_EDGE_RISING>,
+                         <6 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "ready", "low", "high";
+            vdd-supply = <&reg_vdd>;
+        };
+    };

Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2023 Aspeed, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED G6 PWM and Fan Tach controller
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  The ASPEED PWM controller can support up to 16 PWM outputs.
+  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
+  They are independent hardware blocks, which are different from the
+  previous version of the ASPEED chip.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-pwm-tach
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - tach-ch
+
+required:
+  - reg
+  - clocks
+  - resets
+  - "#pwm-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    pwm_tach: pwm-tach-controller@1e610000 {
+      compatible = "aspeed,ast2600-pwm-tach";
+      reg = <0x1e610000 0x100>;
+      clocks = <&syscon ASPEED_CLK_AHB>;
+      resets = <&syscon ASPEED_RESET_PWM>;
+      #pwm-cells = <3>;
+
+      fan-0 {
+        tach-ch = /bits/ 8 <0x0>;
+        pwms = <&pwm_tach 0 40000 0>;
+      };
+
+      fan-1 {
+        tach-ch = /bits/ 8 <0x1 0x2>;
+        pwms = <&pwm_tach 1 40000 0>;
+      };
+    };

Documentation/devicetree/bindings/hwmon/fan-common.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+properties:
+  max-rpm:
+    description:
+      Max RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100000
+
+  min-rpm:
+    description:
+      Min RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1000
+
+  pulses-per-revolution:
+    description:
+      The number of pulse from fan sensor per revolution.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4
+
+  tach-div:
+    description:
+      Divisor for the tach sampling clock, which determines the sensitivity of the tach pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  target-rpm:
+    description:
+      The default desired fan speed in RPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fan-driving-mode:
+    description:
+      Select the driving mode of the fan.(DC, PWM and so on)
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ dc, pwm ]
+
+  pwms:
+    description:
+      PWM provider.
+    maxItems: 1
+
+  "#cooling-cells":
+    const: 2
+
+  cooling-levels:
+    description:
+      The control value which correspond to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  tach-ch:
+    description:
+      The tach channel used for the fan.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  label:
+    description:
+      Optional fan label
+
+  fan-supply:
+    description:
+      Power supply for fan.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: true
+
+...

Documentation/devicetree/bindings/hwmon/hwmon-common.yaml

+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware Monitoring Devices Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  label:
+    description: A descriptive name for this device.
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor.
+
+additionalProperties: true

Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml

@@ -25,7 +25,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml

@@ -25,15 +25,14 @@ properties:
       The default is 102.4 volts.
     type: boolean
 
-  shunt-resistor-micro-ohms:
-    description:
-      Resistor value micro-ohms.
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/lm75.yaml

@@ -57,6 +57,7 @@ required:
   - reg
 
 allOf:
+  - $ref: hwmon-common.yaml#
   - if:
       not:
         properties:
@@ -71,7 +72,7 @@ allOf:
       properties:
         interrupts: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml

@@ -25,6 +25,7 @@ properties:
       - nuvoton,nct6796
       - nuvoton,nct6797
       - nuvoton,nct6798
+      - nuvoton,nct6799
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml

@@ -30,6 +30,23 @@ properties:
       unconnected(has internal pull-down).
     type: boolean
 
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -38,6 +55,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -45,5 +63,15 @@ examples:
         tda38640@40 {
             compatible = "infineon,tda38640";
             reg = <0x40>;
+
+            interrupt-parent = <&smb_pex_cpu0_event>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                pvnn_main_cpu0: vout {
+                    regulator-name = "pvnn_main_cpu0";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
         };
     };

Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml

@@ -34,11 +34,26 @@ properties:
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/hwmon/hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml

@@ -28,10 +28,14 @@ properties:
       - ti,ina231
       - ti,ina237
       - ti,ina238
+      - ti,ina260
 
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   shunt-resistor:
     description:
       Shunt resistor value in micro-Ohm.
@@ -66,7 +70,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -77,6 +84,8 @@ examples:
         power-sensor@44 {
             compatible = "ti,ina220";
             reg = <0x44>;
+            #io-channel-cells = <1>;
+            label = "vdd_3v0";
             shunt-resistor = <1000>;
             vs-supply = <&vdd_3v0>;
         };

Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml

@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml

@@ -35,7 +35,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/regulator/infineon,ir38060.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/infineon,ir38060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon Buck Regulators with PMBUS interfaces
+
+maintainers:
+  - Not Me.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - infineon,ir38060
+      - infineon,ir38064
+      - infineon,ir38164
+      - infineon,ir38263
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@34 {
+        compatible = "infineon,ir38060";
+        reg = <0x34>;
+
+        regulator-min-microvolt = <437500>;
+        regulator-max-microvolt = <1387500>;
+      };
+    };

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -47,6 +47,8 @@ properties:
           - adi,lt7182s
             # AMS iAQ-Core VOC Sensor
           - ams,iaq-core
+            # Temperature monitoring of Astera Labs PT5161L PCIe retimer
+          - asteralabs,pt5161l
             # i2c serial eeprom (24cxx)
           - at,24c08
             # ATSHA204 - i2c h/w symmetric crypto module
@@ -129,6 +131,8 @@ properties:
           - mps,mp2975
             # Monolithic Power Systems Inc. multi-phase hot-swap controller mp5990
           - mps,mp5990
+            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
+          - mps,mpq8785
             # Honeywell Humidicon HIH-6130 humidity/temperature sensor
           - honeywell,hi6130
             # IBM Common Form Factor Power Supply Versions (all versions)
@@ -139,14 +143,6 @@ properties:
           - ibm,cffps2
             # Infineon IR36021 digital POL buck controller
           - infineon,ir36021
-            # Infineon IR38060 Voltage Regulator
-          - infineon,ir38060
-            # Infineon IR38064 Voltage Regulator
-          - infineon,ir38064
-            # Infineon IR38164 Voltage Regulator
-          - infineon,ir38164
-            # Infineon IR38263 Voltage Regulator
-          - infineon,ir38263
             # Infineon IRPS5401 Voltage Regulator (PMIC)
           - infineon,irps5401
             # Infineon TLV493D-A1B6 I2C 3D Magnetic Sensor

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -109,6 +109,8 @@ patternProperties:
     description: Amlogic, Inc.
   "^ampere,.*":
     description: Ampere Computing LLC
+  "^amphenol,.*":
+    description: Amphenol Advanced Sensors
   "^ampire,.*":
     description: Ampire Co., Ltd.
   "^ams,.*":
@@ -161,6 +163,8 @@ patternProperties:
     description: ASPEED Technology Inc.
   "^asrock,.*":
     description: ASRock Inc.
+  "^asteralabs,.*":
+    description: Astera Labs, Inc.
   "^asus,.*":
     description: AsusTek Computer Inc.
   "^atheros,.*":

Documentation/hwmon/aspeed-g6-pwm-tach.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver aspeed-g6-pwm-tach
+=================================
+
+Supported chips:
+	ASPEED AST2600
+
+Authors:
+	<billy_tsai@aspeedtech.com>
+
+Description:
+------------
+This driver implements support for ASPEED AST2600 Fan Tacho controller.
+The controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+=============== ======= ======================================================
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+fanX_div	rw	Fan divisor: Supported value are power of 4 (1, 4, 16
+                        64, ... 4194304)
+                        The larger divisor, the less rpm accuracy and the less
+                        affected by fan signal glitch.
+=============== ======= ======================================================

Documentation/hwmon/asus_rog_ryujin.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver asus_rog_ryujin
+=============================
+
+Supported devices:
+
+* ASUS ROG RYUJIN II 360
+
+Author: Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for the listed ASUS ROG RYUJIN
+all-in-one CPU liquid coolers. Available sensors are pump, internal and external
+(controller) fan speed in RPM, their duties in PWM, as well as coolant temperature.
+
+Attaching external fans to the controller is optional and allows them to be
+controlled from the device. If not connected, the fan-related sensors will
+report zeroes. The controller is a separate hardware unit that comes bundled
+with the AIO and connects to it to allow fan control.
+
+The addressable LCD screen is not supported in this driver and should
+be controlled through userspace tools.
+
+Usage notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+=========== =============================================
+fan1_input  Pump speed (in rpm)
+fan2_input  Internal fan speed (in rpm)
+fan3_input  External (controller) fan 1 speed (in rpm)
+fan4_input  External (controller) fan 2 speed (in rpm)
+fan5_input  External (controller) fan 3 speed (in rpm)
+fan6_input  External (controller) fan 4 speed (in rpm)
+temp1_input Coolant temperature (in millidegrees Celsius)
+pwm1        Pump duty
+pwm2        Internal fan duty
+pwm3        External (controller) fan duty
+=========== =============================================

Documentation/hwmon/chipcap2.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver ChipCap2
+======================
+
+Supported chips:
+
+  * Amphenol CC2D23, CC2D23S, CC2D25, CC2D25S, CC2D33, CC2D33S, CC2D35, CC2D35S
+
+    Prefix: 'chipcap2'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+Author:
+
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+Description
+-----------
+
+This driver implements support for the Amphenol ChipCap 2, a humidity and
+temperature chip family. Temperature is measured in milli degrees celsius,
+relative humidity is expressed as a per cent mille. The measurement ranges
+are the following:
+
+  - Relative humidity: 0 to 100000 pcm (14-bit resolution)
+  - Temperature: -40000 to +125000 m°C (14-bit resolution)
+
+The device communicates with the I2C protocol and uses the I2C address 0x28
+by default.
+
+Depending on the hardware configuration, up to two humidity alarms to control
+minimum and maximum values are provided. Their thresholds and hystersis can be
+configured via sysfs.
+
+Thresholds and hysteris must be provided as a per cent mille. These values
+might be truncated to match the 14-bit device resolution (6.1 pcm/LSB)
+
+Known Issues
+------------
+
+The driver does not support I2C address and command window length modification.
+
+sysfs-Interface
+---------------
+
+The following list includes the sysfs attributes that the driver always provides,
+their permissions and a short description:
+
+=============================== ======= ========================================
+Name                            Perm    Description
+=============================== ======= ========================================
+temp1_input:                    RO      temperature input
+humidity1_input:                RO      humidity input
+=============================== ======= ========================================
+
+The following list includes the sysfs attributes that the driver may provide
+depending on the hardware configuration:
+
+=============================== ======= ========================================
+Name                            Perm    Description
+=============================== ======= ========================================
+humidity1_min:                  RW      humidity low limit. Measurements under
+                                        this limit trigger a humidity low alarm
+humidity1_max:                  RW      humidity high limit. Measurements above
+                                        this limit trigger a humidity high alarm
+humidity1_min_hyst:             RW      humidity low hystersis
+humidity1_max_hyst:             RW      humidity high hystersis
+humidity1_min_alarm:            RO      humidity low alarm indicator
+humidity1_max_alarm:            RO      humidity high alarm indicator
+=============================== ======= ========================================

Documentation/hwmon/emc2305.rst

@@ -6,7 +6,6 @@ Kernel driver emc2305
 Supported chips:
    Microchip EMC2305, EMC2303, EMC2302, EMC2301
 
-   Addresses scanned: I2C 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d
    Prefixes: 'emc2305'
 
    Datasheet: Publicly available at the Microchip website :

Documentation/hwmon/index.rst

@@ -44,13 +44,16 @@ Hardware Monitoring Kernel Drivers
    aquacomputer_d5next
    asb100
    asc7621
+   aspeed-g6-pwm-tach
    aspeed-pwm-tacho
    asus_ec_sensors
+   asus_rog_ryujin
    asus_wmi_sensors
    bcm54140
    bel-pfe
    bpa-rs600
    bt1-pvt
+   chipcap2
    coretemp
    corsair-cpro
    corsair-psu
@@ -129,6 +132,7 @@ Hardware Monitoring Kernel Drivers
    ltc4245
    ltc4260
    ltc4261
+   ltc4282
    ltc4286
    max127
    max15301
@@ -163,6 +167,7 @@ Hardware Monitoring Kernel Drivers
    mp2975
    mp5023
    mp5990
+   mpq8785
    nct6683
    nct6775
    nct7802
@@ -171,6 +176,7 @@ Hardware Monitoring Kernel Drivers
    nsa320
    ntc_thermistor
    nzxt-kraken2
+   nzxt-kraken3
    nzxt-smart2
    occ
    oxp-sensors
@@ -185,6 +191,7 @@ Hardware Monitoring Kernel Drivers
    pmbus
    powerz
    powr1220
+   pt5161l
    pxe1610
    pwm-fan
    q54sj108a2
@@ -208,6 +215,7 @@ Hardware Monitoring Kernel Drivers
    smsc47m1
    sparx5-temp
    stpddc60
+   surface_fan
    sy7636a-hwmon
    tc654
    tc74

Documentation/hwmon/ltc4282.rst

+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel drivers ltc4282
+==========================================
+
+Supported chips:
+
+  * Analog Devices LTC4282
+
+    Prefix: 'ltc4282'
+
+    Addresses scanned: - I2C 0x40 - 0x5A (7-bit)
+    Addresses scanned: - I2C 0x80 - 0xB4 with a step of 2 (8-bit)
+
+    Datasheet:
+
+        https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+Author: Nuno Sá <nuno.sa@analog.com>
+
+Description
+___________
+
+The LTC4282 hot swap controller allows a board to be safely inserted and removed
+from a live backplane. Using one or more external N-channel pass transistors,
+board supply voltage and inrush current are ramped up at an adjustable rate. An
+I2C interface and onboard ADC allows for monitoring of board current, voltage,
+power, energy and fault status. The device features analog foldback current
+limiting and supply monitoring for applications from 2.9V to 33V. Dual 12V gate
+drive allows high power applications to either share safe operating area across
+parallel MOSFETs or support a 2-stage start-up that first charges the load
+capacitance followed by enabling a low on-resistance path to the load. The
+LTC4282 is well suited to high power applications because the precise monitoring
+capability and accurate current limiting reduce the extremes in which both loads
+and power supplies must safely operate. Non-volatile configuration allows for
+flexibility in the autonomous generation of alerts and response to faults.
+
+Sysfs entries
+_____________
+
+The following attributes are supported. Limits are read-write and all the other
+attributes are read-only. Note that in0 and in1 are mutually exclusive. Enabling
+one disables the other and disabling one enables the other.
+
+======================= ==========================================
+in0_input		Output voltage (mV).
+in0_min			Undervoltage threshold
+in0_max                 Overvoltage threshold
+in0_lowest		Lowest measured voltage
+in0_highest		Highest measured voltage
+in0_reset_history	Write 1 to reset in0 history.
+			Also clears fet bad and short fault logs.
+in0_min_alarm		Undervoltage alarm
+in0_max_alarm           Overvoltage alarm
+in0_enable		Enable/Disable VSOURCE monitoring
+in0_fault		Failure in the MOSFETs. Either bad or shorted FET.
+in0_label		Channel label (VSOURCE)
+
+in1_input		Input voltage (mV).
+in1_min			Undervoltage threshold
+in1_max                 Overvoltage threshold
+in1_lowest		Lowest measured voltage
+in1_highest		Highest measured voltage
+in1_reset_history	Write 1 to reset in1 history.
+			Also clears over/undervoltage fault logs.
+in1_min_alarm		Undervoltage alarm
+in1_max_alarm           Overvoltage alarm
+in1_lcrit_alarm         Critical Undervoltage alarm
+in1_crit_alarm          Critical Overvoltage alarm
+in1_enable		Enable/Disable VDD monitoring
+in1_label		Channel label (VDD)
+
+in2_input		GPIO voltage (mV)
+in2_min			Undervoltage threshold
+in2_max			Overvoltage threshold
+in2_lowest		Lowest measured voltage
+in2_highest		Highest measured voltage
+in2_reset_history	Write 1 to reset in2 history
+in2_min_alarm		Undervoltage alarm
+in2_max_alarm		Overvoltage alarm
+in2_label		Channel label (VGPIO)
+
+curr1_input		Sense current (mA)
+curr1_min		Undercurrent threshold
+curr1_max		Overcurrent threshold
+curr1_lowest		Lowest measured current
+curr1_highest		Highest measured current
+curr1_reset_history	Write 1 to reset curr1 history.
+			Also clears overcurrent fault logs.
+curr1_min_alarm		Undercurrent alarm
+curr1_max_alarm		Overcurrent alarm
+curr1_crit_alarm        Critical Overcurrent alarm
+curr1_label		Channel label (ISENSE)
+
+power1_input		Power (in uW)
+power1_min		Low power threshold
+power1_max		High power threshold
+power1_input_lowest	Historical minimum power use
+power1_input_highest	Historical maximum power use
+power1_reset_history	Write 1 to reset power1 history.
+			Also clears power bad fault logs.
+power1_min_alarm	Low power alarm
+power1_max_alarm	High power alarm
+power1_label		Channel label (Power)
+
+energy1_input		Measured energy over time (in microJoule)
+energy1_enable		Enable/Disable Energy accumulation
+======================= ==========================================
+
+DebugFs entries
+_______________
+
+The chip also has a fault log register where failures can be logged. Hence,
+as these are logging events, we give access to them in debugfs. Note that
+even if some failure is detected in these logs, it does necessarily mean
+that the failure is still present. As mentioned in the proper Sysfs entries,
+these logs can be cleared by writing in the proper reset_history attribute.
+
+.. warning:: The debugfs interface is subject to change without notice
+             and is only available when the kernel is compiled with
+             ``CONFIG_DEBUG_FS`` defined.
+
+``/sys/kernel/debug/ltc4282-hwmon[X]/``
+contains the following attributes:
+
+=======================  ==========================================
+power1_bad_fault_log     Set to 1 by a power1 bad fault occurring.
+in0_fet_short_fault_log	 Set to 1 when the ADC detects a FET-short fault.
+in0_fet_bad_fault_log    Set to 1 when a FET-BAD fault occurs.
+in1_crit_fault_log       Set to 1 by a VDD overvoltage fault occurring.
+in1_lcrit_fault_log      Set to 1 by a VDD undervoltage fault occurring.
+curr1_crit_fault_log	 Set to 1 by an overcurrent fault occurring.
+=======================  ==========================================

Documentation/hwmon/max6620.rst

@@ -11,7 +11,7 @@ Supported chips:
 
     Addresses scanned: none
 
-    Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6620.pdf
 
 Authors:
     - L\. Grunenberg <contact@lgrunenberg.de>

Documentation/hwmon/mpq8785.rst

+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver mpq8785
+=======================
+
+Supported chips:
+
+  * MPS MPQ8785
+
+    Prefix: 'mpq8785'
+
+Author: Charles Hsu <ythsu0511@gmail.com>
+
+Description
+-----------
+
+The MPQ8785 is a fully integrated, PMBus-compatible, high-frequency, synchronous
+buck converter. The MPQ8785 offers a very compact solution that achieves up to
+40A output current per phase, with excellent load and line regulation over a
+wide input supply range. The MPQ8785 operates at high efficiency over a wide
+output current load range.
+
+The PMBus interface provides converter configurations and key parameters
+monitoring.
+
+The MPQ8785 adopts MPS's proprietary multi-phase digital constant-on-time (MCOT)
+control, which provides fast transient response and eases loop stabilization.
+The MCOT scheme also allows multiple MPQ8785 devices to be connected in parallel
+with excellent current sharing and phase interleaving for high-current
+applications.
+
+Fully integrated protection features include over-current protection (OCP),
+over-voltage protection (OVP), under-voltage protection (UVP), and
+over-temperature protection (OTP).
+
+The MPQ8785 requires a minimal number of readily available, standard external
+components, and is available in a TLGA (5mmx6mm) package.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_crit**
+
+**temp1_crit_alarm**

Documentation/hwmon/nct6683.rst

@@ -64,4 +64,5 @@ Intel DB85FL	NCT6683D EC firmware version 1.0 build 04/03/13
 ASRock X570	NCT6683D EC firmware version 1.0 build 06/28/19
 ASRock X670E	NCT6686D EC firmware version 1.0 build 05/19/22
 MSI B550	NCT6687D EC firmware version 1.0 build 05/07/20
+MSI X670-P	NCT6687D EC firmware version 0.0 build 09/27/22
 =============== ===============================================

Documentation/hwmon/nzxt-kraken3.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken3
+==========================
+
+Supported devices:
+
+* NZXT Kraken X53
+* NZXT Kraken X63
+* NZXT Kraken X73
+* NZXT Kraken Z53
+* NZXT Kraken Z63
+* NZXT Kraken Z73
+
+Author: Jonas Malaco, Aleksa Savic
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X53/X63/X73 and
+Z53/Z63/Z73 all-in-one CPU liquid coolers. All models expose liquid temperature
+and pump speed (in RPM), as well as PWM control (either as a fixed value
+or through a temp-PWM curve). The Z-series models additionally expose the speed
+and duty of an optionally connected fan, with the same PWM control capabilities.
+
+Pump and fan duty control mode can be set through pwm[1-2]_enable, where 1 is
+for the manual control mode and 2 is for the liquid temp to PWM curve mode.
+Writing a 0 disables control of the channel through the driver after setting its
+duty to 100%.
+
+The temperature of the curves relates to the fixed [20-59] range, correlating to
+the detected liquid temperature. Only PWM values (ranging from 0-255) can be set.
+If in curve mode, setting point values should be done in moderation - the devices
+require complete curves to be sent for each change; they can lock up or discard
+the changes if they are too numerous at once. Suggestion is to set them while
+in an another mode, and then apply them by switching to curve.
+
+The devices can report if they are faulty. The driver supports that situation
+and will issue a warning. This can also happen when the USB cable is connected,
+but SATA power is not.
+
+The addressable RGB LEDs and LCD screen (only on Z-series models) are not
+supported in this driver, but can be controlled through existing userspace tools,
+such as `liquidctl`_.
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Possible pwm_enable values are:
+
+====== ==========================================================================
+0      Set fan to 100%
+1      Direct PWM mode (applies value in corresponding PWM entry)
+2      Curve control mode (applies the temp-PWM duty curve based on coolant temp)
+====== ==========================================================================
+
+Sysfs entries
+-------------
+
+============================== ================================================================
+fan1_input                     Pump speed (in rpm)
+fan2_input                     Fan speed (in rpm)
+temp1_input                    Coolant temperature (in millidegrees Celsius)
+pwm1                           Pump duty (value between 0-255)
+pwm1_enable                    Pump duty control mode (0: disabled, 1: manual, 2: curve)
+pwm2                           Fan duty (value between 0-255)
+pwm2_enable                    Fan duty control mode (0: disabled, 1: manual, 2: curve)
+temp[1-2]_auto_point[1-40]_pwm Temp-PWM duty curves (for pump and fan), related to coolant temp
+============================== ================================================================

Documentation/hwmon/oxp-sensors.rst

@@ -33,6 +33,7 @@ Currently the driver supports the following handhelds:
  - AOK ZOE A1 PRO
  - Aya Neo 2
  - Aya Neo AIR
+ - Aya Neo AIR Plus (Mendocino)
  - Aya Neo AIR Pro
  - Aya Neo Geek
  - OneXPlayer AMD

Documentation/hwmon/pt5161l.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver pt5161l
+=====================
+
+Supported chips:
+
+  * Astera Labs PT5161L
+
+    Prefix: 'pt5161l'
+
+    Addresses scanned: I2C 0x20 - 0x27
+
+    Datasheet: Not publicly available.
+
+Authors: Cosmo Chou <cosmo.chou@quantatw.com>
+
+Description
+-----------
+
+This driver implements support for temperature monitoring of Astera Labs
+PT5161L series PCIe retimer chips.
+
+This driver implementation originates from the CSDK available at
+https://github.com/facebook/openbmc/tree/helium/common/recipes-lib/retimer-v2.14
+The communication protocol utilized is based on the I2C/SMBus standard.
+
+Sysfs entries
+----------------
+
+================ ==============================================
+temp1_input      Measured temperature (in millidegrees Celsius)
+================ ==============================================
+
+Debugfs entries
+----------------
+
+================ ===============================
+fw_load_status   Firmware load status
+fw_ver           Firmware version of the retimer
+heartbeat_status Heartbeat status
+================ ===============================

Documentation/hwmon/sht3x.rst

@@ -65,6 +65,10 @@ When the temperature and humidity readings move back between the hysteresis
 values, the alert bit is set to 0 and the alert pin on the sensor is set to
 low.
 
+The serial number exposed to debugfs allows for unique identification of the
+sensors. For sts32, sts33 and sht33, the manufacturer provides calibration
+certificates through an API.
+
 sysfs-Interface
 ---------------
 
@@ -99,3 +103,10 @@ repeatability:      write or read repeatability, higher repeatability means
                         - 1: medium repeatability
                         - 2: high repeatability
 =================== ============================================================
+
+debugfs-Interface
+-----------------
+
+=================== ============================================================
+serial_number:      unique serial number of the sensor in decimal
+=================== ============================================================

Documentation/hwmon/surface_fan.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver surface_fan
+=========================
+
+Supported Devices:
+
+  * Microsoft Surface Pro 9
+
+Author: Ivor Wanders <ivor@iwanders.net>
+
+Description
+-----------
+
+This provides monitoring of the fan found in some Microsoft Surface Pro devices,
+like the Surface Pro 9. The fan is always controlled by the onboard controller.
+
+Sysfs interface
+---------------
+
+======================= ======= =========================================
+Name                    Perm    Description
+======================= ======= =========================================
+``fan1_input``          RO      Current fan speed in RPM.
+======================= ======= =========================================

MAINTAINERS

@@ -1104,6 +1104,14 @@ F:	Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
 F:	drivers/perf/amlogic/
 F:	include/soc/amlogic/
 
+AMPHENOL CHIPCAP 2 HUMIDITY-TEMPERATURE IIO DRIVER
+M:	Javier Carrasco <javier.carrasco.cruz@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
+F:	Documentation/hwmon/chipcap2.rst
+F:	drivers/hwmon/chipcap2.c
+
 AMPHION VPU CODEC V4L2 DRIVER
 M:	Ming Qian <ming.qian@nxp.com>
 M:	Zhou Peng <eagle.zhou@nxp.com>
@@ -1390,15 +1398,6 @@ F:	drivers/iio/amplifiers/hmc425a.c
 F:	drivers/staging/iio/*/ad*
 X:	drivers/iio/*/adjd*
 
-ANALOG DEVICES INC MAX31760 DRIVER
-M:	Ibrahim Tilki <Ibrahim.Tilki@analog.com>
-S:	Maintained
-W:	http://wiki.analog.com/
-W:	https://ez.analog.com/linux-software-drivers
-F:	Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
-F:	Documentation/hwmon/max31760.rst
-F:	drivers/hwmon/max31760.c
-
 ANALOGBITS PLL LIBRARIES
 M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Samuel Holland <samuel.holland@sifive.com>
@@ -3190,6 +3189,12 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git
 F:	drivers/platform/x86/asus-tf103c-dock.c
 
+ASUS ROG RYUJIN AIO HARDWARE MONITOR DRIVER
+M:	Aleksa Savic <savicaleksa83@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	drivers/hwmon/asus_rog_ryujin.c
+
 ASUS WIRELESS RADIO CONTROL DRIVER
 M:	João Paulo Rechi Vita <jprvita@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -10531,22 +10536,6 @@ L:	linux-fbdev@vger.kernel.org
 S:	Orphan
 F:	drivers/video/fbdev/imsttfb.c
 
-INA209 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
-F:	Documentation/hwmon/ina209.rst
-F:	drivers/hwmon/ina209.c
-
-INA2XX HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/ina2xx.rst
-F:	drivers/hwmon/ina2xx.c
-F:	include/linux/platform_data/ina2xx.h
-
 INDEX OF FURTHER KERNEL DOCUMENTATION
 M:	Carlos Bilbao <carlos.bilbao@amd.com>
 S:	Maintained
@@ -11531,14 +11520,6 @@ S:	Maintained
 F:	arch/x86/include/asm/jailhouse_para.h
 F:	arch/x86/kernel/jailhouse.c
 
-JC42.4 TEMPERATURE SENSOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
-F:	Documentation/hwmon/jc42.rst
-F:	drivers/hwmon/jc42.c
-
 JFS FILESYSTEM
 M:	Dave Kleikamp <shaggy@kernel.org>
 L:	jfs-discussion@lists.sourceforge.net
@@ -12603,13 +12584,6 @@ F:	Documentation/hwmon/lm90.rst
 F:	drivers/hwmon/lm90.c
 F:	include/dt-bindings/thermal/lm90.h
 
-LM95234 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/lm95234.rst
-F:	drivers/hwmon/lm95234.c
-
 LME2510 MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -12813,12 +12787,13 @@ W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
 F:	drivers/iio/temperature/ltc2983.c
 
-LTC4261 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
+LTC4282 HARDWARE MONITOR DRIVER
+M:	Nuno Sa <nuno.sa@analog.com>
 L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/ltc4261.rst
-F:	drivers/hwmon/ltc4261.c
+S:	Supported
+F:	Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
+F:	Documentation/hwmon/ltc4282.rst
+F:	drivers/hwmon/ltc4282.c
 
 LTC4286 HARDWARE MONITOR DRIVER
 M:	Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
@@ -13176,13 +13151,6 @@ S:	Maintained
 F:	Documentation/hwmon/max15301.rst
 F:	drivers/hwmon/pmbus/max15301.c
 
-MAX16065 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/max16065.rst
-F:	drivers/hwmon/max16065.c
-
 MAX2175 SDR TUNER DRIVER
 M:	Ramesh Shanmugasundaram <rashanmu@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -13193,15 +13161,6 @@ F:	Documentation/userspace-api/media/drivers/max2175.rst
 F:	drivers/media/i2c/max2175*
 F:	include/uapi/linux/max2175.h
 
-MAX31827 TEMPERATURE SWITCH DRIVER
-M:	Daniel Matyas <daniel.matyas@analog.com>
-L:	linux-hwmon@vger.kernel.org
-S:	Supported
-W:	https://ez.analog.com/linux-software-drivers
-F:	Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
-F:	Documentation/hwmon/max31827.rst
-F:	drivers/hwmon/max31827.c
-
 MAX31335 RTC DRIVER
 M:	Antoniu Miclaus <antoniu.miclaus@analog.com>
 L:	linux-rtc@vger.kernel.org
@@ -13216,15 +13175,6 @@ S:	Orphan
 F:	Documentation/hwmon/max6650.rst
 F:	drivers/hwmon/max6650.c
 
-MAX6697 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/hwmon/max6697.txt
-F:	Documentation/hwmon/max6697.rst
-F:	drivers/hwmon/max6697.c
-F:	include/linux/platform_data/max6697.h
-
 MAX9286 QUAD GMSL DESERIALIZER DRIVER
 M:	Jacopo Mondi <jacopo+renesas@jmondi.org>
 M:	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
@@ -14630,6 +14580,14 @@ F:	Documentation/driver-api/surface_aggregator/clients/dtx.rst
 F:	drivers/platform/surface/surface_dtx.c
 F:	include/uapi/linux/surface_aggregator/dtx.h
 
+MICROSOFT SURFACE SENSOR FAN DRIVER
+M:	Maximilian Luz <luzmaximilian@gmail.com>
+M:	Ivor Wanders <ivor@iwanders.net>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/surface_fan.rst
+F:	drivers/hwmon/surface_fan.c
+
 MICROSOFT SURFACE GPE LID SUPPORT DRIVER
 M:	Maximilian Luz <luzmaximilian@gmail.com>
 L:	platform-driver-x86@vger.kernel.org
@@ -15134,15 +15092,6 @@ M:	Samuel Mendoza-Jonas <sam@mendozajonas.com>
 S:	Maintained
 F:	net/ncsi/
 
-NCT6775 HARDWARE MONITOR DRIVER - CORE & PLATFORM DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/nct6775.rst
-F:	drivers/hwmon/nct6775-core.c
-F:	drivers/hwmon/nct6775-platform.c
-F:	drivers/hwmon/nct6775.h
-
 NCT6775 HARDWARE MONITOR DRIVER - I2C DRIVER
 M:	Zev Weiss <zev@bewilderbeest.net>
 L:	linux-hwmon@vger.kernel.org
@@ -15898,6 +15847,14 @@ S:	Maintained
 F:	Documentation/hwmon/nzxt-kraken2.rst
 F:	drivers/hwmon/nzxt-kraken2.c
 
+NZXT-KRAKEN3 HARDWARE MONITORING DRIVER
+M:	Jonas Malaco <jonas@protocubo.io>
+M:	Aleksa Savic <savicaleksa83@gmail.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/nzxt-kraken3.rst
+F:	drivers/hwmon/nzxt-kraken3.c
+
 NZXT-SMART2 HARDWARE MONITORING DRIVER
 M:	Aleksandr Mezin <mezin.alexander@gmail.com>
 L:	linux-hwmon@vger.kernel.org
@@ -17490,35 +17447,6 @@ S:	Maintained
 F:	Documentation/hwmon/pm6764tr.rst
 F:	drivers/hwmon/pmbus/pm6764tr.c
 
-PMBUS HARDWARE MONITORING DRIVERS
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-W:	http://hwmon.wiki.kernel.org/
-W:	http://www.roeck-us.net/linux/drivers/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
-F:	Documentation/devicetree/bindings/hwmon/ltc2978.txt
-F:	Documentation/devicetree/bindings/hwmon/max31785.txt
-F:	Documentation/hwmon/adm1275.rst
-F:	Documentation/hwmon/ibm-cffps.rst
-F:	Documentation/hwmon/ir35221.rst
-F:	Documentation/hwmon/lm25066.rst
-F:	Documentation/hwmon/ltc2978.rst
-F:	Documentation/hwmon/ltc3815.rst
-F:	Documentation/hwmon/max16064.rst
-F:	Documentation/hwmon/max20751.rst
-F:	Documentation/hwmon/max31785.rst
-F:	Documentation/hwmon/max34440.rst
-F:	Documentation/hwmon/max8688.rst
-F:	Documentation/hwmon/pmbus-core.rst
-F:	Documentation/hwmon/pmbus.rst
-F:	Documentation/hwmon/tps40422.rst
-F:	Documentation/hwmon/ucd9000.rst
-F:	Documentation/hwmon/ucd9200.rst
-F:	Documentation/hwmon/zl6100.rst
-F:	drivers/hwmon/pmbus/
-F:	include/linux/pmbus.h
-
 PMC SIERRA MaxRAID DRIVER
 L:	linux-scsi@vger.kernel.org
 S:	Orphan
@@ -17740,6 +17668,13 @@ F:	fs/pstore/
 F:	include/linux/pstore*
 K:	\b(pstore|ramoops)
 
+PT5161L HARDWARE MONITOR DRIVER
+M:	Cosmo Chou <cosmo.chou@quantatw.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/pt5161l.rst
+F:	drivers/hwmon/pt5161l.c
+
 PTP HARDWARE CLOCK SUPPORT
 M:	Richard Cochran <richardcochran@gmail.com>
 L:	netdev@vger.kernel.org
@@ -22227,22 +22162,6 @@ F:	drivers/mmc/host/renesas_sdhi*
 F:	drivers/mmc/host/tmio_mmc*
 F:	include/linux/mfd/tmio.h
 
-TMP401 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
-F:	Documentation/hwmon/tmp401.rst
-F:	drivers/hwmon/tmp401.c
-
-TMP464 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
-F:	Documentation/hwmon/tmp464.rst
-F:	drivers/hwmon/tmp464.c
-
 TMP513 HARDWARE MONITOR DRIVER
 M:	Eric Tremblay <etremblay@distech-controls.com>
 L:	linux-hwmon@vger.kernel.org

drivers/hwmon/Kconfig

@@ -301,6 +301,16 @@ config SENSORS_ASC7621
 	  This driver can also be built as a module. If so, the module
 	  will be called asc7621.
 
+config SENSORS_ASUS_ROG_RYUJIN
+	tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver"
+	depends on HID
+	help
+	  If you say yes here you get support for the fans and sensors of
+	  the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called asus_rog_ryujin.
+
 config SENSORS_AXI_FAN_CONTROL
 	tristate "Analog Devices FAN Control HDL Core driver"
 	help
@@ -412,6 +422,17 @@ config SENSORS_ASPEED
 	  This driver can also be built as a module. If so, the module
 	  will be called aspeed_pwm_tacho.
 
+config SENSORS_ASPEED_G6
+	tristate "ASPEED g6 PWM and Fan tach driver"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	depends on PWM
+	help
+	  This driver provides support for ASPEED G6 PWM and Fan Tach
+	  controllers.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called aspeed_pwm_tacho.
+
 config SENSORS_ATXP1
 	tristate "Attansic ATXP1 VID controller"
 	depends on I2C
@@ -452,6 +473,16 @@ config SENSORS_BT1_PVT_ALARMS
 	  the data conversion will be periodically performed and the data will be
 	  saved in the internal driver cache.
 
+config SENSORS_CHIPCAP2
+	tristate "Amphenol ChipCap 2 relative humidity and temperature sensor"
+	depends on I2C
+	help
+	  Say yes here to build support for the Amphenol ChipCap 2
+	  relative humidity and temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called chipcap2.
+
 config SENSORS_CORSAIR_CPRO
 	tristate "Corsair Commander Pro controller"
 	depends on HID
@@ -1038,6 +1069,17 @@ config SENSORS_LTC4261
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc4261.
 
+config SENSORS_LTC4282
+	tristate "Analog Devices LTC4282"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for Analog Devices LTC4282
+	  High Current Hot Swap Controller I2C interface.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc4282.
+
 config SENSORS_LTQ_CPUTEMP
 	bool "Lantiq cpu temperature sensor driver"
 	depends on SOC_XWAY
@@ -1674,6 +1716,16 @@ config SENSORS_NZXT_KRAKEN2
 	  This driver can also be built as a module. If so, the module
 	  will be called nzxt-kraken2.
 
+config SENSORS_NZXT_KRAKEN3
+	tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers"
+	depends on USB_HID
+	help
+	  If you say yes here you get support for hardware monitoring for the
+	  NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nzxt-kraken3.
+
 config SENSORS_NZXT_SMART2
 	tristate "NZXT RGB & Fan Controller/Smart Device v2"
 	depends on USB_HID
@@ -1714,6 +1766,16 @@ source "drivers/hwmon/peci/Kconfig"
 
 source "drivers/hwmon/pmbus/Kconfig"
 
+config SENSORS_PT5161L
+	tristate "Astera Labs PT5161L PCIe retimer hardware monitoring"
+	depends on I2C
+	help
+	  If you say yes here you get support for temperature monitoring
+	  on the Astera Labs PT5161L PCIe retimer.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called pt5161l.
+
 config SENSORS_PWM_FAN
 	tristate "PWM fan"
 	depends on (PWM && OF) || COMPILE_TEST
@@ -1994,6 +2056,20 @@ config SENSORS_SFCTEMP
 	  This driver can also be built as a module.  If so, the module
 	  will be called sfctemp.
 
+config SENSORS_SURFACE_FAN
+	tristate "Surface Fan Driver"
+	depends on SURFACE_AGGREGATOR
+	depends on SURFACE_AGGREGATOR_BUS
+	help
+	  Driver that provides monitoring of the fan on Surface Pro devices that
+	  have a fan, like the Surface Pro 9.
+
+	  This makes the fan's current speed accessible through the hwmon
+	  system. It does not provide control over the fan, the firmware is
+	  responsible for that, this driver merely provides monitoring.
+
+	  Select M or Y here, if you want to be able to read the fan's speed.
+
 config SENSORS_ADC128D818
 	tristate "Texas Instruments ADC128D818"
 	depends on I2C

drivers/hwmon/Makefile

@@ -55,9 +55,12 @@ obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
 obj-$(CONFIG_SENSORS_AS370)	+= as370-hwmon.o
 obj-$(CONFIG_SENSORS_ASC7621)	+= asc7621.o
 obj-$(CONFIG_SENSORS_ASPEED)	+= aspeed-pwm-tacho.o
+obj-$(CONFIG_SENSORS_ASPEED_G6) += aspeed-g6-pwm-tach.o
+obj-$(CONFIG_SENSORS_ASUS_ROG_RYUJIN)	+= asus_rog_ryujin.o
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_AXI_FAN_CONTROL) += axi-fan-control.o
 obj-$(CONFIG_SENSORS_BT1_PVT)	+= bt1-pvt.o
+obj-$(CONFIG_SENSORS_CHIPCAP2) += chipcap2.o
 obj-$(CONFIG_SENSORS_CORETEMP)	+= coretemp.o
 obj-$(CONFIG_SENSORS_CORSAIR_CPRO) += corsair-cpro.o
 obj-$(CONFIG_SENSORS_CORSAIR_PSU) += corsair-psu.o
@@ -136,6 +139,7 @@ obj-$(CONFIG_SENSORS_LTC4222)	+= ltc4222.o
 obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
 obj-$(CONFIG_SENSORS_LTC4260)	+= ltc4260.o
 obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
+obj-$(CONFIG_SENSORS_LTC4282)	+= ltc4282.o
 obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX127)	+= max127.o
@@ -173,6 +177,7 @@ obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
 obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
+obj-$(CONFIG_SENSORS_NZXT_KRAKEN3) += nzxt-kraken3.o
 obj-$(CONFIG_SENSORS_NZXT_SMART2) += nzxt-smart2.o
 obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
@@ -180,6 +185,7 @@ obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_POWERZ)	+= powerz.o
 obj-$(CONFIG_SENSORS_POWR1220)  += powr1220.o
+obj-$(CONFIG_SENSORS_PT5161L)	+= pt5161l.o
 obj-$(CONFIG_SENSORS_PWM_FAN)	+= pwm-fan.o
 obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON)	+= raspberrypi-hwmon.o
 obj-$(CONFIG_SENSORS_SBTSI)	+= sbtsi_temp.o
@@ -201,6 +207,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
 obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
+obj-$(CONFIG_SENSORS_SURFACE_FAN)+= surface_fan.o
 obj-$(CONFIG_SENSORS_SY7636A)	+= sy7636a-hwmon.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o

drivers/hwmon/adm1177.c

@@ -250,7 +250,6 @@ static const struct of_device_id adm1177_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, adm1177_dt_ids);
 
 static struct i2c_driver adm1177_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "adm1177",
 		.of_match_table = adm1177_dt_ids,

drivers/hwmon/adt7310.c

@@ -124,7 +124,7 @@ static int adt7310_reg_write(void *context, unsigned int reg, unsigned int val)
 static const struct regmap_config adt7310_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = adt7310_regmap_is_volatile,
 	.reg_read = adt7310_reg_read,
 	.reg_write = adt7310_reg_write,

drivers/hwmon/adt7410.c

@@ -69,7 +69,7 @@ static const struct regmap_config adt7410_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
 	.max_register = ADT7X10_ID,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = adt7410_regmap_is_volatile,
 	.reg_read = adt7410_reg_read,
 	.reg_write = adt7410_reg_write,
@@ -95,14 +95,12 @@ static const struct i2c_device_id adt7410_ids[] = {
 MODULE_DEVICE_TABLE(i2c, adt7410_ids);
 
 static struct i2c_driver adt7410_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "adt7410",
 		.pm	= pm_sleep_ptr(&adt7x10_dev_pm_ops),
 	},
 	.probe		= adt7410_i2c_probe,
 	.id_table	= adt7410_ids,
-	.address_list	= I2C_ADDRS(0x48, 0x49, 0x4a, 0x4b),
 };
 module_i2c_driver(adt7410_driver);
 

drivers/hwmon/amc6821.c

@@ -934,10 +934,21 @@ static const struct i2c_device_id amc6821_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, amc6821_id);
 
+static const struct of_device_id __maybe_unused amc6821_of_match[] = {
+	{
+		.compatible = "ti,amc6821",
+		.data = (void *)amc6821,
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, amc6821_of_match);
+
 static struct i2c_driver amc6821_driver = {
 	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "amc6821",
+		.of_match_table = of_match_ptr(amc6821_of_match),
 	},
 	.probe = amc6821_probe,
 	.id_table = amc6821_id,

drivers/hwmon/axi-fan-control.c

@@ -13,8 +13,9 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 
 /* register map */
 #define ADI_REG_RSTN		0x0080
@@ -83,7 +84,7 @@ static ssize_t axi_fan_control_show(struct device *dev, struct device_attribute
 
 	temp = DIV_ROUND_CLOSEST_ULL(temp * 509314ULL, 65535) - 280230;
 
-	return sprintf(buf, "%u\n", temp);
+	return sysfs_emit(buf, "%u\n", temp);
 }
 
 static ssize_t axi_fan_control_store(struct device *dev, struct device_attribute *da,
@@ -368,12 +369,12 @@ static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
 }
 
 static int axi_fan_control_init(struct axi_fan_control_data *ctl,
-				const struct device_node *np)
+				const struct device *dev)
 {
 	int ret;
 
 	/* get fan pulses per revolution */
-	ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
+	ret = device_property_read_u32(dev, "pulses-per-revolution", &ctl->ppr);
 	if (ret)
 		return ret;
 
@@ -443,25 +444,16 @@ static struct attribute *axi_fan_control_attrs[] = {
 };
 ATTRIBUTE_GROUPS(axi_fan_control);
 
-static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
-
-static const struct of_device_id axi_fan_control_of_match[] = {
-	{ .compatible = "adi,axi-fan-control-1.00.a",
-		.data = (void *)&version_1_0_0},
-	{},
-};
-MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
-
 static int axi_fan_control_probe(struct platform_device *pdev)
 {
 	struct axi_fan_control_data *ctl;
 	struct clk *clk;
-	const struct of_device_id *id;
+	const unsigned int *id;
 	const char *name = "axi_fan_control";
 	u32 version;
 	int ret;
 
-	id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
+	id = device_get_match_data(&pdev->dev);
 	if (!id)
 		return -EINVAL;
 
@@ -474,10 +466,9 @@ static int axi_fan_control_probe(struct platform_device *pdev)
 		return PTR_ERR(ctl->base);
 
 	clk = devm_clk_get_enabled(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+				     "clk_get failed\n");
 
 	ctl->clk_rate = clk_get_rate(clk);
 	if (!ctl->clk_rate)
@@ -485,22 +476,20 @@ static int axi_fan_control_probe(struct platform_device *pdev)
 
 	version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
 	if (ADI_AXI_PCORE_VER_MAJOR(version) !=
-	    ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data))) {
-		dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
-			ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data)),
-			ADI_AXI_PCORE_VER_MINOR((*(u32 *)id->data)),
-			ADI_AXI_PCORE_VER_PATCH((*(u32 *)id->data)),
-			ADI_AXI_PCORE_VER_MAJOR(version),
-			ADI_AXI_PCORE_VER_MINOR(version),
-			ADI_AXI_PCORE_VER_PATCH(version));
-		return -ENODEV;
-	}
-
-	ret = axi_fan_control_init(ctl, pdev->dev.of_node);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize device\n");
-		return ret;
-	}
+	    ADI_AXI_PCORE_VER_MAJOR((*id)))
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
+				     ADI_AXI_PCORE_VER_MAJOR(*id),
+				     ADI_AXI_PCORE_VER_MINOR(*id),
+				     ADI_AXI_PCORE_VER_PATCH(*id),
+				     ADI_AXI_PCORE_VER_MAJOR(version),
+				     ADI_AXI_PCORE_VER_MINOR(version),
+				     ADI_AXI_PCORE_VER_PATCH(version));
+
+	ret = axi_fan_control_init(ctl, &pdev->dev);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "Failed to initialize device\n");
 
 	ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
 							 name,
@@ -519,14 +508,22 @@ static int axi_fan_control_probe(struct platform_device *pdev)
 					axi_fan_control_irq_handler,
 					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
 					pdev->driver_override, ctl);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to request an irq, %d", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to request an irq\n");
 
 	return 0;
 }
 
+static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
+
+static const struct of_device_id axi_fan_control_of_match[] = {
+	{ .compatible = "adi,axi-fan-control-1.00.a",
+		.data = (void *)&version_1_0_0},
+	{},
+};
+MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
+
 static struct platform_driver axi_fan_control_driver = {
 	.driver = {
 		.name = "axi_fan_control_driver",

drivers/hwmon/dell-smm-hwmon.c

@@ -1450,10 +1450,15 @@ struct i8k_fan_control_data {
 };
 
 enum i8k_fan_controls {
+	I8K_FAN_30A3_31A3,
 	I8K_FAN_34A3_35A3,
 };
 
 static const struct i8k_fan_control_data i8k_fan_control_data[] __initconst = {
+	[I8K_FAN_30A3_31A3] = {
+		.manual_fan = 0x30a3,
+		.auto_fan = 0x31a3,
+	},
 	[I8K_FAN_34A3_35A3] = {
 		.manual_fan = 0x34a3,
 		.auto_fan = 0x35a3,
@@ -1517,6 +1522,14 @@ static const struct dmi_system_id i8k_whitelist_fan_control[] __initconst = {
 		},
 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
 	},
+	{
+		.ident = "Dell XPS 9315",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS 9315"),
+		},
+		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_30A3_31A3],
+	},
 	{ }
 };
 

drivers/hwmon/ds1621.c

@@ -380,7 +380,6 @@ MODULE_DEVICE_TABLE(i2c, ds1621_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ds1621_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ds1621",
 	},

drivers/hwmon/ds620.c

@@ -241,7 +241,6 @@ MODULE_DEVICE_TABLE(i2c, ds620_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ds620_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		   .name = "ds620",
 	},

drivers/hwmon/emc1403.c

@@ -385,7 +385,7 @@ static bool emc1403_regmap_is_volatile(struct device *dev, unsigned int reg)
 static const struct regmap_config emc1403_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = emc1403_regmap_is_volatile,
 };
 

drivers/hwmon/emc2305.c

@@ -12,9 +12,6 @@
 #include <linux/platform_data/emc2305.h>
 #include <linux/thermal.h>
 
-static const unsigned short
-emc2305_normal_i2c[] = { 0x27, 0x2c, 0x2d, 0x2e, 0x2f, 0x4c, 0x4d, I2C_CLIENT_END };
-
 #define EMC2305_REG_DRIVE_FAIL_STATUS	0x27
 #define EMC2305_REG_VENDOR		0xfe
 #define EMC2305_FAN_MAX			0xff
@@ -611,14 +608,12 @@ static void emc2305_remove(struct i2c_client *client)
 }
 
 static struct i2c_driver emc2305_driver = {
-	.class  = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "emc2305",
 	},
 	.probe = emc2305_probe,
 	.remove	  = emc2305_remove,
 	.id_table = emc2305_ids,
-	.address_list = emc2305_normal_i2c,
 };
 
 module_i2c_driver(emc2305_driver);

drivers/hwmon/hwmon.c

@@ -510,6 +510,7 @@ static const char * const hwmon_in_attr_templates[] = {
 	[hwmon_in_rated_min] = "in%d_rated_min",
 	[hwmon_in_rated_max] = "in%d_rated_max",
 	[hwmon_in_beep] = "in%d_beep",
+	[hwmon_in_fault] = "in%d_fault",
 };
 
 static const char * const hwmon_curr_attr_templates[] = {
@@ -586,6 +587,8 @@ static const char * const hwmon_humidity_attr_templates[] = {
 	[hwmon_humidity_fault] = "humidity%d_fault",
 	[hwmon_humidity_rated_min] = "humidity%d_rated_min",
 	[hwmon_humidity_rated_max] = "humidity%d_rated_max",
+	[hwmon_humidity_min_alarm] = "humidity%d_min_alarm",
+	[hwmon_humidity_max_alarm] = "humidity%d_max_alarm",
 };
 
 static const char * const hwmon_fan_attr_templates[] = {

drivers/hwmon/ina209.c

@@ -589,7 +589,6 @@ MODULE_DEVICE_TABLE(of, ina209_of_match);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ina209_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ina209",
 		.of_match_table = of_match_ptr(ina209_of_match),

drivers/hwmon/ina238.c

@@ -629,7 +629,6 @@ static const struct of_device_id __maybe_unused ina238_of_match[] = {
 MODULE_DEVICE_TABLE(of, ina238_of_match);
 
 static struct i2c_driver ina238_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ina238",
 		.of_match_table = of_match_ptr(ina238_of_match),

drivers/hwmon/ina3221.c

@@ -762,7 +762,7 @@ static const struct regmap_config ina3221_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
 
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_table = &ina3221_volatile_table,
 };
 

drivers/hwmon/jc42.c

@@ -497,7 +497,7 @@ static const struct regmap_config jc42_regmap_config = {
 	.writeable_reg = jc42_writable_reg,
 	.readable_reg = jc42_readable_reg,
 	.volatile_reg = jc42_volatile_reg,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 };
 
 static int jc42_probe(struct i2c_client *client)

drivers/hwmon/lm83.c

@@ -165,7 +165,7 @@ static bool lm83_regmap_is_volatile(struct device *dev, unsigned int reg)
 static const struct regmap_config lm83_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = lm83_regmap_is_volatile,
 	.reg_read = lm83_regmap_reg_read,
 	.reg_write = lm83_regmap_reg_write,

drivers/hwmon/max127.c

@@ -335,7 +335,6 @@ static const struct i2c_device_id max127_id[] = {
 MODULE_DEVICE_TABLE(i2c, max127_id);
 
 static struct i2c_driver max127_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max127",
 	},

drivers/hwmon/max31760.c

@@ -60,7 +60,7 @@ static const struct regmap_config regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = 0x5B,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = max31760_volatile_reg,
 };
 
@@ -578,7 +578,6 @@ static DEFINE_SIMPLE_DEV_PM_OPS(max31760_pm_ops, max31760_suspend,
 				max31760_resume);
 
 static struct i2c_driver max31760_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max31760",
 		.of_match_table = max31760_of_match,

drivers/hwmon/max31790.c

@@ -543,7 +543,6 @@ static const struct i2c_device_id max31790_id[] = {
 MODULE_DEVICE_TABLE(i2c, max31790_id);
 
 static struct i2c_driver max31790_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.probe		= max31790_probe,
 	.driver = {
 		.name	= "max31790",

drivers/hwmon/max31827.c

@@ -652,7 +652,6 @@ static const struct of_device_id max31827_of_match[] = {
 MODULE_DEVICE_TABLE(of, max31827_of_match);
 
 static struct i2c_driver max31827_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "max31827",
 		.of_match_table = max31827_of_match,

drivers/hwmon/max6621.c

@@ -549,7 +549,6 @@ static const struct of_device_id __maybe_unused max6621_of_match[] = {
 MODULE_DEVICE_TABLE(of, max6621_of_match);
 
 static struct i2c_driver max6621_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name = MAX6621_DRV_NAME,
 		.of_match_table = of_match_ptr(max6621_of_match),

drivers/hwmon/max6697.c

@@ -780,7 +780,6 @@ static const struct of_device_id __maybe_unused max6697_of_match[] = {
 MODULE_DEVICE_TABLE(of, max6697_of_match);
 
 static struct i2c_driver max6697_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "max6697",
 		.of_match_table = of_match_ptr(max6697_of_match),

drivers/hwmon/nct6683.c

@@ -174,6 +174,7 @@ superio_exit(int ioreg)
 #define NCT6683_CUSTOMER_ID_MITAC	0xa0e
 #define NCT6683_CUSTOMER_ID_MSI		0x201
 #define NCT6683_CUSTOMER_ID_MSI2	0x200
+#define NCT6683_CUSTOMER_ID_MSI3	0x207
 #define NCT6683_CUSTOMER_ID_ASROCK		0xe2c
 #define NCT6683_CUSTOMER_ID_ASROCK2	0xe1b
 #define NCT6683_CUSTOMER_ID_ASROCK3	0x1631
@@ -1224,6 +1225,8 @@ static int nct6683_probe(struct platform_device *pdev)
 		break;
 	case NCT6683_CUSTOMER_ID_MSI2:
 		break;
+	case NCT6683_CUSTOMER_ID_MSI3:
+		break;
 	case NCT6683_CUSTOMER_ID_ASROCK:
 		break;
 	case NCT6683_CUSTOMER_ID_ASROCK2:

drivers/hwmon/nct7802.c

@@ -1051,7 +1051,7 @@ static bool nct7802_regmap_is_volatile(struct device *dev, unsigned int reg)
 static const struct regmap_config nct7802_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = nct7802_regmap_is_volatile,
 };
 

drivers/hwmon/occ/p8_i2c.c

@@ -241,7 +241,6 @@ static const struct of_device_id p8_i2c_occ_of_match[] = {
 MODULE_DEVICE_TABLE(of, p8_i2c_occ_of_match);
 
 static struct i2c_driver p8_i2c_occ_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "occ-hwmon",
 		.of_match_table = p8_i2c_occ_of_match,

drivers/hwmon/oxp-sensors.c

@@ -43,6 +43,7 @@ enum oxp_board {
 	aok_zoe_a1 = 1,
 	aya_neo_2,
 	aya_neo_air,
+	aya_neo_air_plus_mendo,
 	aya_neo_air_pro,
 	aya_neo_geek,
 	oxp_mini_amd,
@@ -98,6 +99,13 @@ static const struct dmi_system_id dmi_table[] = {
 		},
 		.driver_data = (void *)aya_neo_air,
 	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "AB05-Mendocino"),
+		},
+		.driver_data = (void *)aya_neo_air_plus_mendo,
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "AYANEO"),
@@ -332,6 +340,7 @@ static int oxp_platform_read(struct device *dev, enum hwmon_sensor_types type,
 			switch (board) {
 			case aya_neo_2:
 			case aya_neo_air:
+			case aya_neo_air_plus_mendo:
 			case aya_neo_air_pro:
 			case aya_neo_geek:
 			case oxp_mini_amd:
@@ -374,6 +383,7 @@ static int oxp_platform_write(struct device *dev, enum hwmon_sensor_types type,
 			switch (board) {
 			case aya_neo_2:
 			case aya_neo_air:
+			case aya_neo_air_plus_mendo:
 			case aya_neo_air_pro:
 			case aya_neo_geek:
 			case oxp_mini_amd:

drivers/hwmon/pmbus/Kconfig

@@ -377,6 +377,15 @@ config SENSORS_MPQ7932
 	  This driver can also be built as a module. If so, the module will
 	  be called mpq7932.
 
+config SENSORS_MPQ8785
+	tristate "MPS MPQ8785"
+	help
+	  If you say yes here you get hardware monitoring functionality support
+	  for power management IC MPS MPQ8785.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mpq8785.
+
 config SENSORS_PIM4328
 	tristate "Flex PIM4328 and compatibles"
 	help

drivers/hwmon/pmbus/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
 obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
 obj-$(CONFIG_SENSORS_MP5990)	+= mp5990.o
 obj-$(CONFIG_SENSORS_MPQ7932)	+= mpq7932.o
+obj-$(CONFIG_SENSORS_MPQ8785)	+= mpq8785.o
 obj-$(CONFIG_SENSORS_PLI1209BC)	+= pli1209bc.o
 obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
 obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o

drivers/hwmon/pmbus/ir36021.c

@@ -63,7 +63,6 @@ static const struct of_device_id __maybe_unused ir36021_of_id[] = {
 MODULE_DEVICE_TABLE(of, ir36021_of_id);
 
 static struct i2c_driver ir36021_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "ir36021",
 		.of_match_table = of_match_ptr(ir36021_of_id),

drivers/hwmon/pmbus/ir38064.c

@@ -22,7 +22,7 @@
 
 #if IS_ENABLED(CONFIG_SENSORS_IR38064_REGULATOR)
 static const struct regulator_desc ir38064_reg_desc[] = {
-	PMBUS_REGULATOR("vout", 0),
+	PMBUS_REGULATOR_ONE("vout"),
 };
 #endif /* CONFIG_SENSORS_IR38064_REGULATOR */
 

drivers/hwmon/pmbus/lm25066.c

@@ -437,7 +437,7 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
 
 #if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
 static const struct regulator_desc lm25066_reg_desc[] = {
-	PMBUS_REGULATOR("vout", 0),
+	PMBUS_REGULATOR_ONE("vout"),
 };
 #endif
 

drivers/hwmon/pmbus/mpq8785.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MPS MPQ8785 Step-Down Converter
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+static int mpq8785_identify(struct i2c_client *client,
+			    struct pmbus_driver_info *info)
+{
+	int vout_mode;
+
+	vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+	if (vout_mode < 0 || vout_mode == 0xff)
+		return vout_mode < 0 ? vout_mode : -ENODEV;
+	switch (vout_mode >> 5) {
+	case 0:
+		info->format[PSC_VOLTAGE_OUT] = linear;
+		break;
+	case 1:
+	case 2:
+		info->format[PSC_VOLTAGE_OUT] = direct,
+		info->m[PSC_VOLTAGE_OUT] = 64;
+		info->b[PSC_VOLTAGE_OUT] = 0;
+		info->R[PSC_VOLTAGE_OUT] = 1;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+};
+
+static struct pmbus_driver_info mpq8785_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 4,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 1,
+	.m[PSC_CURRENT_OUT] = 16,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 0,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+	.func[0] =
+		PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+	.identify = mpq8785_identify,
+};
+
+static int mpq8785_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &mpq8785_info);
+};
+
+static const struct i2c_device_id mpq8785_id[] = {
+	{ "mpq8785", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, mpq8785_id);
+
+static const struct of_device_id __maybe_unused mpq8785_of_match[] = {
+	{ .compatible = "mps,mpq8785" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mpq8785_of_match);
+
+static struct i2c_driver mpq8785_driver = {
+	.driver = {
+		   .name = "mpq8785",
+		   .of_match_table = of_match_ptr(mpq8785_of_match),
+	},
+	.probe = mpq8785_probe,
+	.id_table = mpq8785_id,
+};
+
+module_i2c_driver(mpq8785_driver);
+
+MODULE_AUTHOR("Charles Hsu <ythsu0511@gmail.com>");
+MODULE_DESCRIPTION("PMBus driver for MPS MPQ8785");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);

drivers/hwmon/pmbus/pmbus_core.c

@@ -3188,7 +3188,7 @@ static int pmbus_regulator_notify(struct pmbus_data *data, int page, int event)
 
 static int pmbus_write_smbalert_mask(struct i2c_client *client, u8 page, u8 reg, u8 val)
 {
-	return pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
+	return _pmbus_write_word_data(client, page, PMBUS_SMBALERT_MASK, reg | (val << 8));
 }
 
 static irqreturn_t pmbus_fault_handler(int irq, void *pdata)

drivers/hwmon/pmbus/tda38640.c

@@ -15,7 +15,7 @@
 #include "pmbus.h"
 
 static const struct regulator_desc __maybe_unused tda38640_reg_desc[] = {
-	PMBUS_REGULATOR("vout", 0),
+	PMBUS_REGULATOR_ONE("vout"),
 };
 
 struct tda38640_data {

drivers/hwmon/powr1220.c

@@ -323,7 +323,6 @@ static const struct i2c_device_id powr1220_ids[] = {
 MODULE_DEVICE_TABLE(i2c, powr1220_ids);
 
 static struct i2c_driver powr1220_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "powr1220",
 	},

drivers/hwmon/sbrmi.c

@@ -342,7 +342,6 @@ static const struct of_device_id __maybe_unused sbrmi_of_match[] = {
 MODULE_DEVICE_TABLE(of, sbrmi_of_match);
 
 static struct i2c_driver sbrmi_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "sbrmi",
 		.of_match_table = of_match_ptr(sbrmi_of_match),

drivers/hwmon/sbtsi_temp.c

@@ -232,7 +232,6 @@ static const struct of_device_id __maybe_unused sbtsi_of_match[] = {
 MODULE_DEVICE_TABLE(of, sbtsi_of_match);
 
 static struct i2c_driver sbtsi_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name = "sbtsi",
 		.of_match_table = of_match_ptr(sbtsi_of_match),

drivers/hwmon/sch5627.c

@@ -116,7 +116,7 @@ static const struct regmap_config sch5627_regmap_config = {
 	.val_bits = 8,
 	.wr_table = &sch5627_tunables_table,
 	.rd_table = &sch5627_tunables_table,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.use_single_read = true,
 	.use_single_write = true,
 	.can_sleep = true,

drivers/hwmon/sht3x.c

@@ -10,6 +10,7 @@
 
 #include <asm/page.h>
 #include <linux/crc8.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
@@ -41,6 +42,9 @@ static const unsigned char sht3x_cmd_heater_off[]              = { 0x30, 0x66 };
 /* other commands */
 static const unsigned char sht3x_cmd_read_status_reg[]         = { 0xf3, 0x2d };
 static const unsigned char sht3x_cmd_clear_status_reg[]        = { 0x30, 0x41 };
+static const unsigned char sht3x_cmd_read_serial_number[]      = { 0x37, 0x80 };
+
+static struct dentry *debugfs;
 
 /* delays for single-shot mode i2c commands, both in us */
 #define SHT3X_SINGLE_WAIT_TIME_HPM  15000
@@ -163,12 +167,14 @@ struct sht3x_data {
 	enum sht3x_chips chip_id;
 	struct mutex i2c_lock; /* lock for sending i2c commands */
 	struct mutex data_lock; /* lock for updating driver data */
+	struct dentry *sensor_dir;
 
 	u8 mode;
 	const unsigned char *command;
 	u32 wait_time;			/* in us*/
 	unsigned long last_update;	/* last update in periodic mode*/
 	enum sht3x_repeatability repeatability;
+	u32 serial_number;
 
 	/*
 	 * cached values for temperature and humidity and limits
@@ -831,6 +837,40 @@ static int sht3x_write(struct device *dev, enum hwmon_sensor_types type,
 	}
 }
 
+static void sht3x_debugfs_init(struct sht3x_data *data)
+{
+	char name[32];
+
+	snprintf(name, sizeof(name), "i2c%u-%02x",
+		 data->client->adapter->nr, data->client->addr);
+	data->sensor_dir = debugfs_create_dir(name, debugfs);
+	debugfs_create_u32("serial_number", 0444,
+			   data->sensor_dir, &data->serial_number);
+}
+
+static void sht3x_debugfs_remove(void *sensor_dir)
+{
+	debugfs_remove_recursive(sensor_dir);
+}
+
+static int sht3x_serial_number_read(struct sht3x_data *data)
+{
+	int ret;
+	char buffer[SHT3X_RESPONSE_LENGTH];
+	struct i2c_client *client = data->client;
+
+	ret = sht3x_read_from_command(client, data,
+				      sht3x_cmd_read_serial_number,
+				      buffer,
+				      SHT3X_RESPONSE_LENGTH, 0);
+	if (ret)
+		return ret;
+
+	data->serial_number = (buffer[0] << 24) | (buffer[1] << 16) |
+			      (buffer[3] << 8) | buffer[4];
+	return ret;
+}
+
 static const struct hwmon_ops sht3x_ops = {
 	.is_visible = sht3x_is_visible,
 	.read = sht3x_read,
@@ -899,6 +939,18 @@ static int sht3x_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
+	ret = sht3x_serial_number_read(data);
+	if (ret) {
+		dev_dbg(dev, "unable to read serial number\n");
+	} else {
+		sht3x_debugfs_init(data);
+		ret = devm_add_action_or_reset(dev,
+					       sht3x_debugfs_remove,
+					       data->sensor_dir);
+		if (ret)
+			return ret;
+	}
+
 	hwmon_dev = devm_hwmon_device_register_with_info(dev,
 							 client->name,
 							 data,
@@ -917,7 +969,19 @@ static struct i2c_driver sht3x_i2c_driver = {
 	.id_table    = sht3x_ids,
 };
 
-module_i2c_driver(sht3x_i2c_driver);
+static int __init sht3x_init(void)
+{
+	debugfs = debugfs_create_dir("sht3x", NULL);
+	return i2c_add_driver(&sht3x_i2c_driver);
+}
+module_init(sht3x_init);
+
+static void __exit sht3x_cleanup(void)
+{
+	debugfs_remove_recursive(debugfs);
+	i2c_del_driver(&sht3x_i2c_driver);
+}
+module_exit(sht3x_cleanup);
 
 MODULE_AUTHOR("David Frey <david.frey@sensirion.com>");
 MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");

drivers/hwmon/sis5595.c

@@ -153,13 +153,9 @@ static inline s8 TEMP_TO_REG(long val)
 }
 
 /*
- * FAN DIV: 1, 2, 4, or 8 (defaults to 2)
- * REG: 0, 1, 2, or 3 (respectively) (defaults to 1)
+ * FAN DIV: 1, 2, 4, or 8
+ * REG: 0, 1, 2, or 3 (respectively)
  */
-static inline u8 DIV_TO_REG(int val)
-{
-	return val == 8 ? 3 : val == 4 ? 2 : val == 1 ? 0 : 1;
-}
 #define DIV_FROM_REG(val) (1 << (val))
 
 /*

drivers/hwmon/surface_fan.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface Fan driver for Surface System Aggregator Module. It provides access
+ * to the fan's rpm through the hwmon system.
+ *
+ * Copyright (C) 2023 Ivor Wanders <ivor@iwanders.net>
+ */
+
+#include <linux/hwmon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/surface_aggregator/device.h>
+#include <linux/types.h>
+
+// SSAM
+SSAM_DEFINE_SYNC_REQUEST_CL_R(__ssam_fan_rpm_get, __le16, {
+	.target_category = SSAM_SSH_TC_FAN,
+	.command_id      = 0x01,
+});
+
+// hwmon
+static umode_t surface_fan_hwmon_is_visible(const void *drvdata,
+					    enum hwmon_sensor_types type, u32 attr,
+					    int channel)
+{
+	return 0444;
+}
+
+static int surface_fan_hwmon_read(struct device *dev,
+				  enum hwmon_sensor_types type, u32 attr,
+				  int channel, long *val)
+{
+	struct ssam_device *sdev = dev_get_drvdata(dev);
+	int ret;
+	__le16 value;
+
+	ret = __ssam_fan_rpm_get(sdev, &value);
+	if (ret)
+		return ret;
+
+	*val = le16_to_cpu(value);
+
+	return 0;
+}
+
+static const struct hwmon_channel_info *const surface_fan_info[] = {
+	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops surface_fan_hwmon_ops = {
+	.is_visible = surface_fan_hwmon_is_visible,
+	.read = surface_fan_hwmon_read,
+};
+
+static const struct hwmon_chip_info surface_fan_chip_info = {
+	.ops = &surface_fan_hwmon_ops,
+	.info = surface_fan_info,
+};
+
+static int surface_fan_probe(struct ssam_device *sdev)
+{
+	struct device *hdev;
+
+	hdev = devm_hwmon_device_register_with_info(&sdev->dev,
+						    "surface_fan", sdev,
+						    &surface_fan_chip_info,
+						    NULL);
+
+	return PTR_ERR_OR_ZERO(hdev);
+}
+
+static const struct ssam_device_id ssam_fan_match[] = {
+	{ SSAM_SDEV(FAN, SAM, 0x01, 0x01) },
+	{},
+};
+MODULE_DEVICE_TABLE(ssam, ssam_fan_match);
+
+static struct ssam_device_driver surface_fan = {
+	.probe = surface_fan_probe,
+	.match_table = ssam_fan_match,
+	.driver = {
+		.name = "surface_fan",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_ssam_device_driver(surface_fan);
+
+MODULE_AUTHOR("Ivor Wanders <ivor@iwanders.net>");
+MODULE_DESCRIPTION("Fan Driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");

drivers/hwmon/tmp401.c

@@ -256,7 +256,7 @@ static int tmp401_reg_write(void *context, unsigned int reg, unsigned int val)
 static const struct regmap_config tmp401_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 16,
-	.cache_type = REGCACHE_RBTREE,
+	.cache_type = REGCACHE_MAPLE,
 	.volatile_reg = tmp401_regmap_is_volatile,
 	.reg_read = tmp401_reg_read,
 	.reg_write = tmp401_reg_write,

drivers/hwmon/w83773g.c

@@ -290,7 +290,6 @@ static int w83773_probe(struct i2c_client *client)
 }
 
 static struct i2c_driver w83773_driver = {
-	.class = I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "w83773g",
 		.of_match_table = of_match_ptr(w83773_of_match),