media: ov5640: Complement yuv mbus formats with their 1X16 versions

According to media bus pixel codes definition, data formats on serial
busses should be described with one bus sample per pixel.

Documentation/userspace-api/media/v4l/subdev-formats.rst states:

"The media bus pixel codes document parallel formats. Should the pixel
data be transported over a serial bus, the media bus pixel code that
describes a parallel format that transfers a sample on a single clock
cycle is used. For instance, both MEDIA_BUS_FMT_BGR888_1X24 and
MEDIA_BUS_FMT_BGR888_3X8 are used on parallel busses for transferring an
8 bits per sample BGR data, whereas on serial busses the data in this
format is only referred to using MEDIA_BUS_FMT_BGR888_1X24. This is
because there is effectively only a single way to transport that
format on the serial busses."

Some MIPI CSI receivers strictly obey this definition and declare
support for only *1X_* formats.

Hence, complement the supported media bus formats with their 1X16 versions
(currently applicable to yuyv, uyvy) to enhance interoperability with CSI
receivers.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/i2c/ov5640.c

@@ -135,7 +135,9 @@ struct ov5640_pixfmt {
 static const struct ov5640_pixfmt ov5640_formats[] = {
 	{ MEDIA_BUS_FMT_JPEG_1X8, V4L2_COLORSPACE_JPEG, },
 	{ MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_SRGB, },
+	{ MEDIA_BUS_FMT_UYVY8_1X16, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
+	{ MEDIA_BUS_FMT_YUYV8_1X16, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB, },
@@ -2338,11 +2340,13 @@ static int ov5640_set_framefmt(struct ov5640_dev *sensor,
 	u8 fmt, mux;
 
 	switch (format->code) {
+	case MEDIA_BUS_FMT_UYVY8_1X16:
 	case MEDIA_BUS_FMT_UYVY8_2X8:
 		/* YUV422, UYVY */
 		fmt = 0x3f;
 		mux = OV5640_FMT_MUX_YUV422;
 		break;
+	case MEDIA_BUS_FMT_YUYV8_1X16:
 	case MEDIA_BUS_FMT_YUYV8_2X8:
 		/* YUV422, YUYV */
 		fmt = 0x30;