Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ata updates from Damien Le Moal:

 - Add support for the .remove_new callback to the ata_platform code to
   simplify device removal interface (Uwe)

 - Code simplification in ata_dev_revalidate() (Yahu)

 - Fix code indentation and coding style in the pata_parport protocol
   modules to avoid warnings from static code analyzers (me)

 - Clarify ata_eh_qc_retry() behavior with better comments (Niklas)

 - Simplify and improve ata_change_queue_depth() behavior to have a
   consistent behavior between libsas managed devices and libata managed
   devices (e.g. AHCI connected devices) (me)

 - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
   and ata_ncq_supported() helpers instead of open coding flags tests
   (me)

 - Cleanup ahci_reset_controller() code (me)

 - Change the pata_octeon_cf and sata_svw drivers to use
   of_property_read_reg() to simplify the code (Rob, me)

 - Remove unnecessary include files from ahci_octeon driver (me)

 - Modify the DesignWare ahci dt bindings to add support for the
   Rockchip RK3588 AHCI (Sebastian)

* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
  dt-bindings: phy: rockchip: rk3588 has two reset lines
  dt-bindings: ata: dwc-ahci: add Rockchip RK3588
  dt-bindings: ata: dwc-ahci: add PHY clocks
  ata: ahci_octeon: Remove unnecessary include
  ata: pata_octeon_cf: Add missing header include
  ata: ahci: Cleanup ahci_reset_controller()
  ata: Use of_property_read_reg() to parse "reg"
  ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
  ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
  ata: libata-sata: Improve ata_change_queue_depth()
  ata: libata-sata: Simplify ata_change_queue_depth()
  ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
  ata: pata_parport: Fix on26 module code indentation and style
  ata: pata_parport: Fix on20 module code indentation and style
  ata: pata_parport: Fix ktti module code indentation and style
  ata: pata_parport: Fix kbic module code indentation and style
  ata: pata_parport: Fix friq module code indentation and style
  ata: pata_parport: Fix fit3 module code indentation and style
  ata: pata_parport: Fix fit2 module code indentation and style
  ata: pata_parport: Fix epia module code indentation and style
  ...

Documentation/devicetree/bindings/ata/rockchip,dwc-ahci.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/rockchip,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller for Rockchip devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the Synopsys DWC
+  implementation of the AHCI SATA controller found in Rockchip
+  devices.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,rk3568-dwc-ahci
+          - rockchip,rk3588-dwc-ahci
+      - const: snps,dwc-ahci
+
+  ports-implemented:
+    const: 1
+
+  sata-port@0:
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        const: 0
+
+    unevaluatedProperties: false
+
+patternProperties:
+  "^sata-port@[1-9a-e]$": false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports-implemented
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+            - const: ref
+            - const: asic
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3568-dwc-ahci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: sata
+            - const: pmalive
+            - const: rxoob
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata@fe210000 {
+      compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+      reg = <0xfe210000 0x1000>;
+      clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+               <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+               <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+      clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+      interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+      ports-implemented = <0x1>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sata-port@0 {
+        reg = <0>;
+        hba-port-cap = <HBA_PORT_FBSCP>;
+        phys = <&combphy0_ps PHY_TYPE_SATA>;
+        phy-names = "sata-phy";
+        snps,rx-ts-max = <32>;
+        snps,tx-ts-max = <32>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml

@@ -31,11 +31,11 @@ properties:
       PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
       clock, etc.
     minItems: 1
-    maxItems: 4
+    maxItems: 6
 
   clock-names:
     minItems: 1
-    maxItems: 4
+    maxItems: 6
     items:
       oneOf:
         - description: Application APB/AHB/AXI BIU clock
@@ -48,6 +48,10 @@ properties:
           const: pmalive
         - description: RxOOB detection clock
           const: rxoob
+        - description: PHY Transmit Clock
+          const: asic
+        - description: PHY Receive Clock
+          const: rbc
         - description: SATA Ports reference clock
           const: ref
 

Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml

@@ -13,6 +13,15 @@ description:
   This document defines device tree bindings for the generic Synopsys DWC
   implementation of the AHCI SATA controller.
 
+select:
+  properties:
+    compatible:
+      enum:
+        - snps,dwc-ahci
+        - snps,spear-ahci
+  required:
+    - compatible
+
 allOf:
   - $ref: snps,dwc-ahci-common.yaml#
 
@@ -23,10 +32,6 @@ properties:
         const: snps,dwc-ahci
       - description: SPEAr1340 AHCI SATA device
         const: snps,spear-ahci
-      - description: Rockhip RK3568 AHCI controller
-        items:
-          - const: rockchip,rk3568-dwc-ahci
-          - const: snps,dwc-ahci
 
 patternProperties:
   "^sata-port@[0-9a-e]$":

Documentation/devicetree/bindings/phy/phy-rockchip-naneng-combphy.yaml

@@ -31,8 +31,14 @@ properties:
       - const: pipe
 
   resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
     items:
-      - description: exclusive PHY reset line
+      - const: phy
+      - const: apb
 
   rockchip,enable-ssc:
     type: boolean
@@ -78,6 +84,32 @@ required:
   - rockchip,pipe-phy-grf
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-naneng-combphy
+    then:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-naneng-combphy
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+      required:
+        - reset-names
+
 additionalProperties: false
 
 examples:

drivers/ata/ahci_brcm.c

@@ -544,7 +544,7 @@ static int brcm_ahci_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int brcm_ahci_remove(struct platform_device *pdev)
+static void brcm_ahci_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
@@ -552,7 +552,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 
 	brcm_sata_phys_disable(priv);
 
-	return ata_platform_remove_one(pdev);
+	ata_platform_remove_one(pdev);
 }
 
 static void brcm_ahci_shutdown(struct platform_device *pdev)
@@ -573,7 +573,7 @@ static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
 
 static struct platform_driver brcm_ahci_driver = {
 	.probe = brcm_ahci_probe,
-	.remove = brcm_ahci_remove,
+	.remove_new = brcm_ahci_remove,
 	.shutdown = brcm_ahci_shutdown,
 	.driver = {
 		.name = DRV_NAME,

drivers/ata/ahci_ceva.c

@@ -369,7 +369,7 @@ MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
 
 static struct platform_driver ceva_ahci_driver = {
 	.probe = ceva_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ceva_ahci_of_match,

drivers/ata/ahci_da850.c

@@ -238,7 +238,7 @@ MODULE_DEVICE_TABLE(of, ahci_da850_of_match);
 
 static struct platform_driver ahci_da850_driver = {
 	.probe = ahci_da850_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_da850_of_match,

drivers/ata/ahci_dm816.c

@@ -182,7 +182,7 @@ MODULE_DEVICE_TABLE(of, ahci_dm816_of_match);
 
 static struct platform_driver ahci_dm816_driver = {
 	.probe = ahci_dm816_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = AHCI_DM816_DRV_NAME,
 		.of_match_table = ahci_dm816_of_match,

drivers/ata/ahci_dwc.c

@@ -478,7 +478,7 @@ MODULE_DEVICE_TABLE(of, ahci_dwc_of_match);
 
 static struct platform_driver ahci_dwc_driver = {
 	.probe = ahci_dwc_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.shutdown = ahci_platform_shutdown,
 	.driver = {
 		.name = DRV_NAME,

drivers/ata/ahci_imx.c

@@ -1223,7 +1223,7 @@ static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
 
 static struct platform_driver imx_ahci_driver = {
 	.probe = imx_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = imx_ahci_of_match,

drivers/ata/ahci_mtk.c

@@ -173,7 +173,7 @@ MODULE_DEVICE_TABLE(of, ahci_of_match);
 
 static struct platform_driver mtk_ahci_driver = {
 	.probe = mtk_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,

drivers/ata/ahci_mvebu.c

@@ -245,7 +245,7 @@ MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match);
 
 static struct platform_driver ahci_mvebu_driver = {
 	.probe = ahci_mvebu_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.suspend = ahci_mvebu_suspend,
 	.resume = ahci_mvebu_resume,
 	.driver = {

drivers/ata/ahci_octeon.c

@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/octeon/octeon.h>
-#include <asm/bitfield.h>
 
 #define CVMX_SATA_UCTL_SHIM_CFG		0xE8
 

drivers/ata/ahci_platform.c

@@ -96,7 +96,7 @@ MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
 
 static struct platform_driver ahci_driver = {
 	.probe = ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.shutdown = ahci_platform_shutdown,
 	.driver = {
 		.name = DRV_NAME,

drivers/ata/ahci_qoriq.c

@@ -359,7 +359,7 @@ static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend,
 
 static struct platform_driver ahci_qoriq_driver = {
 	.probe = ahci_qoriq_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_qoriq_of_match,

drivers/ata/ahci_seattle.c

@@ -187,7 +187,7 @@ MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
 
 static struct platform_driver ahci_seattle_driver = {
 	.probe = ahci_seattle_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.acpi_match_table = ahci_acpi_match,

drivers/ata/ahci_st.c

@@ -239,7 +239,7 @@ static struct platform_driver st_ahci_driver = {
 		.of_match_table = st_ahci_match,
 	},
 	.probe = st_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 };
 module_platform_driver(st_ahci_driver);
 

drivers/ata/ahci_sunxi.c

@@ -292,7 +292,7 @@ MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
 
 static struct platform_driver ahci_sunxi_driver = {
 	.probe = ahci_sunxi_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_sunxi_of_match,

drivers/ata/ahci_tegra.c

@@ -609,7 +609,7 @@ static int tegra_ahci_probe(struct platform_device *pdev)
 
 static struct platform_driver tegra_ahci_driver = {
 	.probe = tegra_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = tegra_ahci_of_match,

drivers/ata/ahci_xgene.c

@@ -868,7 +868,7 @@ static int xgene_ahci_probe(struct platform_device *pdev)
 
 static struct platform_driver xgene_ahci_driver = {
 	.probe = xgene_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = xgene_ahci_of_match,

drivers/ata/libahci.c

@@ -975,44 +975,43 @@ int ahci_reset_controller(struct ata_host *host)
 	void __iomem *mmio = hpriv->mmio;
 	u32 tmp;
 
-	/* we must be in AHCI mode, before using anything
-	 * AHCI-specific, such as HOST_RESET.
+	/*
+	 * We must be in AHCI mode, before using anything AHCI-specific, such
+	 * as HOST_RESET.
 	 */
 	ahci_enable_ahci(mmio);
 
-	/* global controller reset */
-	if (!ahci_skip_host_reset) {
-		tmp = readl(mmio + HOST_CTL);
-		if ((tmp & HOST_RESET) == 0) {
-			writel(tmp | HOST_RESET, mmio + HOST_CTL);
-			readl(mmio + HOST_CTL); /* flush */
-		}
+	/* Global controller reset */
+	if (ahci_skip_host_reset) {
+		dev_info(host->dev, "Skipping global host reset\n");
+		return 0;
+	}
 
-		/*
-		 * to perform host reset, OS should set HOST_RESET
-		 * and poll until this bit is read to be "0".
-		 * reset must complete within 1 second, or
-		 * the hardware should be considered fried.
-		 */
-		tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET,
-					HOST_RESET, 10, 1000);
+	tmp = readl(mmio + HOST_CTL);
+	if (!(tmp & HOST_RESET)) {
+		writel(tmp | HOST_RESET, mmio + HOST_CTL);
+		readl(mmio + HOST_CTL); /* flush */
+	}
 
-		if (tmp & HOST_RESET) {
-			dev_err(host->dev, "controller reset failed (0x%x)\n",
-				tmp);
-			return -EIO;
-		}
+	/*
+	 * To perform host reset, OS should set HOST_RESET and poll until this
+	 * bit is read to be "0". Reset must complete within 1 second, or the
+	 * hardware should be considered fried.
+	 */
+	tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET,
+				HOST_RESET, 10, 1000);
+	if (tmp & HOST_RESET) {
+		dev_err(host->dev, "Controller reset failed (0x%x)\n",
+			tmp);
+		return -EIO;
+	}
 
-		/* turn on AHCI mode */
-		ahci_enable_ahci(mmio);
+	/* Turn on AHCI mode */
+	ahci_enable_ahci(mmio);
 
-		/* Some registers might be cleared on reset.  Restore
-		 * initial values.
-		 */
-		if (!(hpriv->flags & AHCI_HFLAG_NO_WRITE_TO_RO))
-			ahci_restore_initial_config(host);
-	} else
-		dev_info(host->dev, "skipping global host reset\n");
+	/* Some registers might be cleared on reset. Restore initial values. */
+	if (!(hpriv->flags & AHCI_HFLAG_NO_WRITE_TO_RO))
+		ahci_restore_initial_config(host);
 
 	return 0;
 }

drivers/ata/libata-core.c

@@ -3802,11 +3802,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 		return -ENODEV;
 
 	/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
-	if (ata_class_enabled(new_class) &&
-	    new_class != ATA_DEV_ATA &&
-	    new_class != ATA_DEV_ATAPI &&
-	    new_class != ATA_DEV_ZAC &&
-	    new_class != ATA_DEV_SEMB) {
+	if (ata_class_enabled(new_class) && new_class == ATA_DEV_PMP) {
 		ata_dev_info(dev, "class mismatch %u != %u\n",
 			     dev->class, new_class);
 		rc = -ENODEV;
@@ -6142,13 +6138,11 @@ EXPORT_SYMBOL_GPL(ata_pci_device_resume);
  *	LOCKING:
  *	Inherited from platform layer (may sleep).
  */
-int ata_platform_remove_one(struct platform_device *pdev)
+void ata_platform_remove_one(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
 
 	ata_host_detach(host);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_platform_remove_one);
 

drivers/ata/libata-eh.c

@@ -1817,9 +1817,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	verdict = ata_eh_speed_down_verdict(dev);
 
 	/* turn off NCQ? */
-	if ((verdict & ATA_EH_SPDN_NCQ_OFF) &&
-	    (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ |
-			   ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) {
+	if ((verdict & ATA_EH_SPDN_NCQ_OFF) && ata_ncq_enabled(dev)) {
 		dev->flags |= ATA_DFLAG_NCQ_OFF;
 		ata_dev_warn(dev, "NCQ disabled due to excessive errors\n");
 		goto done;
@@ -3813,16 +3811,29 @@ void ata_eh_finish(struct ata_port *ap)
 			 * generate sense data in this function,
 			 * considering both err_mask and tf.
 			 */
-			if (qc->flags & ATA_QCFLAG_RETRY)
+			if (qc->flags & ATA_QCFLAG_RETRY) {
+				/*
+				 * Since qc->err_mask is set, ata_eh_qc_retry()
+				 * will not increment scmd->allowed, so upper
+				 * layer will only retry the command if it has
+				 * not already been retried too many times.
+				 */
 				ata_eh_qc_retry(qc);
-			else
+			} else {
 				ata_eh_qc_complete(qc);
+			}
 		} else {
 			if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
 				ata_eh_qc_complete(qc);
 			} else {
 				/* feed zero TF to sense generation */
 				memset(&qc->result_tf, 0, sizeof(qc->result_tf));
+				/*
+				 * Since qc->err_mask is not set,
+				 * ata_eh_qc_retry() will increment
+				 * scmd->allowed, so upper layer is guaranteed
+				 * to retry the command.
+				 */
 				ata_eh_qc_retry(qc);
 			}
 		}

drivers/ata/libata-sata.c

@@ -1023,7 +1023,6 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
 /**
  *	ata_change_queue_depth - Set a device maximum queue depth
  *	@ap: ATA port of the target device
- *	@dev: target ATA device
  *	@sdev: SCSI device to configure queue depth for
  *	@queue_depth: new queue depth
  *
@@ -1031,33 +1030,47 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
  *	and libata.
  *
  */
-int ata_change_queue_depth(struct ata_port *ap, struct ata_device *dev,
-			   struct scsi_device *sdev, int queue_depth)
+int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+			   int queue_depth)
 {
+	struct ata_device *dev;
 	unsigned long flags;
+	int max_queue_depth;
 
-	if (!dev || !ata_dev_enabled(dev))
-		return sdev->queue_depth;
+	spin_lock_irqsave(ap->lock, flags);
 
-	if (queue_depth < 1 || queue_depth == sdev->queue_depth)
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev || queue_depth < 1 || queue_depth == sdev->queue_depth) {
+		spin_unlock_irqrestore(ap->lock, flags);
 		return sdev->queue_depth;
+	}
 
-	/* NCQ enabled? */
-	spin_lock_irqsave(ap->lock, flags);
-	dev->flags &= ~ATA_DFLAG_NCQ_OFF;
-	if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
+	/*
+	 * Make sure that the queue depth requested does not exceed the device
+	 * capabilities.
+	 */
+	max_queue_depth = min(ATA_MAX_QUEUE, sdev->host->can_queue);
+	max_queue_depth = min(max_queue_depth, ata_id_queue_depth(dev->id));
+	if (queue_depth > max_queue_depth) {
+		spin_unlock_irqrestore(ap->lock, flags);
+		return -EINVAL;
+	}
+
+	/*
+	 * If NCQ is not supported by the device or if the target queue depth
+	 * is 1 (to disable drive side command queueing), turn off NCQ.
+	 */
+	if (queue_depth == 1 || !ata_ncq_supported(dev)) {
 		dev->flags |= ATA_DFLAG_NCQ_OFF;
 		queue_depth = 1;
+	} else {
+		dev->flags &= ~ATA_DFLAG_NCQ_OFF;
 	}
-	spin_unlock_irqrestore(ap->lock, flags);
 
-	/* limit and apply queue depth */
-	queue_depth = min(queue_depth, sdev->host->can_queue);
-	queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
-	queue_depth = min(queue_depth, ATA_MAX_QUEUE);
+	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (sdev->queue_depth == queue_depth)
-		return -EINVAL;
+	if (queue_depth == sdev->queue_depth)
+		return sdev->queue_depth;
 
 	return scsi_change_queue_depth(sdev, queue_depth);
 }
@@ -1082,8 +1095,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 
-	return ata_change_queue_depth(ap, ata_scsi_find_dev(ap, sdev),
-				      sdev, queue_depth);
+	return ata_change_queue_depth(ap, sdev, queue_depth);
 }
 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
 

drivers/ata/libata-scsi.c

@@ -1122,7 +1122,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 	if (dev->flags & ATA_DFLAG_AN)
 		set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
 
-	if (dev->flags & ATA_DFLAG_NCQ)
+	if (ata_ncq_supported(dev))
 		depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
 	depth = min(ATA_MAX_QUEUE, depth);
 	scsi_change_queue_depth(sdev, depth);

drivers/ata/pata_ixp4xx_cf.c

@@ -303,7 +303,7 @@ static struct platform_driver ixp4xx_pata_platform_driver = {
 		.of_match_table = ixp4xx_pata_of_match,
 	},
 	.probe		= ixp4xx_pata_probe,
-	.remove		= ata_platform_remove_one,
+	.remove_new	= ata_platform_remove_one,
 };
 
 module_platform_driver(ixp4xx_pata_platform_driver);

drivers/ata/pata_octeon_cf.c

@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <scsi/scsi_host.h>
@@ -804,9 +805,7 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	struct resource *res_cs0, *res_cs1;
 
 	bool is_16bit;
-	const __be32 *cs_num;
-	struct property *reg_prop;
-	int n_addr, n_size, reg_len;
+	u64 reg;
 	struct device_node *node;
 	void __iomem *cs0;
 	void __iomem *cs1 = NULL;
@@ -834,15 +833,10 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	else
 		is_16bit = false;
 
-	n_addr = of_n_addr_cells(node);
-	n_size = of_n_size_cells(node);
-
-	reg_prop = of_find_property(node, "reg", &reg_len);
-	if (!reg_prop || reg_len < sizeof(__be32))
-		return -EINVAL;
-
-	cs_num = reg_prop->value;
-	cf_port->cs0 = be32_to_cpup(cs_num);
+	rv = of_property_read_reg(node, 0, &reg, NULL);
+	if (rv < 0)
+		return rv;
+	cf_port->cs0 = upper_32_bits(reg);
 
 	if (cf_port->is_true_ide) {
 		struct device_node *dma_node;
@@ -884,13 +878,12 @@ static int octeon_cf_probe(struct platform_device *pdev)
 		cs1 = devm_ioremap(&pdev->dev, res_cs1->start,
 					   resource_size(res_cs1));
 		if (!cs1)
-			return rv;
-
-		if (reg_len < (n_addr + n_size + 1) * sizeof(__be32))
 			return -EINVAL;
 
-		cs_num += n_addr + n_size;
-		cf_port->cs1 = be32_to_cpup(cs_num);
+		rv = of_property_read_reg(node, 1, &reg, NULL);
+		if (rv < 0)
+			return rv;
+		cf_port->cs1 = upper_32_bits(reg);
 	}
 
 	res_cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);

drivers/ata/pata_of_platform.c

@@ -89,7 +89,7 @@ static struct platform_driver pata_of_platform_driver = {
 		.of_match_table = pata_of_platform_match,
 	},
 	.probe		= pata_of_platform_probe,
-	.remove		= ata_platform_remove_one,
+	.remove_new	= ata_platform_remove_one,
 };
 
 module_platform_driver(pata_of_platform_driver);

drivers/ata/pata_parport/aten.c

-/* 
-        aten.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                            Under the terms of the GNU General Public License.
-
-	aten.c is a low-level protocol driver for the ATEN EH-100
-	parallel port adapter.  The EH-100 supports 4-bit and 8-bit
-        modes only.  There is also an EH-132 which supports EPP mode
-        transfers.  The EH-132 is not yet supported.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-8  Grant R. Guenther <grant@torque.net>
+ *
+ * aten.c is a low-level protocol driver for the ATEN EH-100
+ * parallel port adapter.  The EH-100 supports 4-bit and 8-bit
+ * modes only.  There is also an EH-132 which supports EPP mode
+ * transfers.  The EH-132 is not yet supported.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,36 +19,36 @@
 
 #define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x08, 0x20 };
 
 static void aten_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-	r = regr + cont_map[cont] + 0x80;
+{
+	int r = regr + cont_map[cont] + 0x80;
 
 	w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
 }
 
 static int aten_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int  a, b, r;
 
-{	int  a, b, r;
-
-        r = regr + cont_map[cont] + 0x40;
+	r = regr + cont_map[cont] + 0x40;
 
 	switch (pi->mode) {
 
-        case 0: w0(r); w2(0xe); w2(6); 
+	case 0:
+		w0(r); w2(0xe); w2(6);
 		w2(7); w2(6); w2(0);
 		a = r1(); w0(0x10); b = r1(); w2(0xc);
 		return j44(a,b);
 
-        case 1: r |= 0x10;
-		w0(r); w2(0xe); w2(6); w0(0xff); 
+	case 1:
+		r |= 0x10;
+		w0(r); w2(0xe); w2(6); w0(0xff);
 		w2(0x27); w2(0x26); w2(0x20);
 		a = r0();
 		w2(0x26); w2(0xc);
@@ -59,27 +58,30 @@ static int aten_read_regr(struct pi_adapter *pi, int cont, int regr)
 }
 
 static void aten_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, a, b, c, d;
+{
+	int  k, a, b, c, d;
 
 	switch (pi->mode) {
 
-	case 0:	w0(0x48); w2(0xe); w2(6);
-		for (k=0;k<count/2;k++) {
+	case 0:
+		w0(0x48); w2(0xe); w2(6);
+		for (k = 0; k < count / 2; k++) {
 			w2(7); w2(6); w2(2);
 			a = r1(); w0(0x58); b = r1();
 			w2(0); d = r1(); w0(0x48); c = r1();
-			buf[2*k] = j44(c,d);
-			buf[2*k+1] = j44(a,b);
+			buf[2 * k] = j44(c, d);
+			buf[2 * k + 1] = j44(a, b);
 		}
 		w2(0xc);
 		break;
 
-	case 1: w0(0x58); w2(0xe); w2(6);
-		for (k=0;k<count/2;k++) {
+	case 1:
+		w0(0x58); w2(0xe); w2(6);
+		for (k = 0; k < count / 2; k++) {
 			w2(0x27); w2(0x26); w2(0x22);
 			a = r0(); w2(0x20); b = r0();
-			buf[2*k] = b; buf[2*k+1] = a;
+			buf[2 * k] = b;
+			buf[2 * k + 1] = a;
 		}
 		w2(0x26); w2(0xc);
 		break;
@@ -87,36 +89,37 @@ static void aten_read_block(struct pi_adapter *pi, char *buf, int count)
 }
 
 static void aten_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int k;
+{
+	int k;
 
 	w0(0x88); w2(0xe); w2(6);
-	for (k=0;k<count/2;k++) {
-		w0(buf[2*k+1]); w2(0xe); w2(6);
-		w0(buf[2*k]); w2(7); w2(6);
+	for (k = 0; k < count / 2; k++) {
+		w0(buf[2 * k + 1]); w2(0xe); w2(6);
+		w0(buf[2 * k]); w2(7); w2(6);
 	}
 	w2(0xc);
 }
 
 static void aten_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-	w2(0xc);	
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(0xc);
 }
 
 static void aten_disconnect(struct pi_adapter *pi)
-
-{       w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void aten_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[2] = { "4-bit", "8-bit" };
 
-{       char    *mode_string[2] = {"4-bit","8-bit"};
-
-	dev_info(&pi->dev, "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol aten = {

drivers/ata/pata_parport/bpck6.c

+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
-	backpack.c (c) 2001 Micro Solutions Inc.
-		Released under the terms of the GNU General Public license
-
-	backpack.c is a low-level protocol driver for the Micro Solutions
-		"BACKPACK" parallel port IDE adapter
-		(Works on Series 6 drives)
-
-	Written by: Ken Hahn     (linux-dev@micro-solutions.com)
-	            Clive Turvey (linux-dev@micro-solutions.com)
-
-*/
+ * (c) 2001 Micro Solutions Inc.
+ *
+ * backpack.c is a low-level protocol driver for the Micro Solutions
+ * "BACKPACK" parallel port IDE adapter (works on Series 6 drives).
+ *
+ * Written by: Ken Hahn (linux-dev@micro-solutions.com)
+ *             Clive Turvey (linux-dev@micro-solutions.com)
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -326,11 +324,14 @@ static int bpck6_open(struct pi_adapter *pi)
 	if (j != k)
 		goto fail;
 
-	if (i & 4)	// EPP
+	if (i & 4) {
+		/* EPP */
 		parport_frob_control(pi->pardev->port,
 			PARPORT_CONTROL_SELECT | PARPORT_CONTROL_INIT, 0);
-	else				// PPC/ECP
+	} else {
+		/* PPC/ECP */
 		parport_frob_control(pi->pardev->port, PARPORT_CONTROL_SELECT, 0);
+	}
 
 	pi->private = 0;
 
@@ -347,17 +348,20 @@ static int bpck6_open(struct pi_adapter *pi)
 	parport_write_control(pi->pardev->port, pi->saved_r2);
 	parport_write_data(pi->pardev->port, pi->saved_r0);
 
-	return 0; // FAIL
+	return 0;
 }
 
 static void bpck6_deselect(struct pi_adapter *pi)
 {
-	if (mode_map[pi->mode] & 4)	// EPP
+	if (mode_map[pi->mode] & 4) {
+		/* EPP */
 		parport_frob_control(pi->pardev->port, PARPORT_CONTROL_INIT,
-							PARPORT_CONTROL_INIT);
-	else								// PPC/ECP
+				     PARPORT_CONTROL_INIT);
+	} else {
+		/* PPC/ECP */
 		parport_frob_control(pi->pardev->port, PARPORT_CONTROL_SELECT,
-							PARPORT_CONTROL_SELECT);
+				     PARPORT_CONTROL_SELECT);
+	}
 
 	parport_write_data(pi->pardev->port, pi->saved_r0);
 	parport_write_control(pi->pardev->port,
@@ -386,7 +390,8 @@ static void bpck6_disconnect(struct pi_adapter *pi)
 	bpck6_deselect(pi);
 }
 
-static int bpck6_test_port(struct pi_adapter *pi)   /* check for 8-bit port */
+/* check for 8-bit port */
+static int bpck6_test_port(struct pi_adapter *pi)
 {
 	dev_dbg(&pi->dev, "PARPORT indicates modes=%x for lp=0x%lx\n",
 		pi->pardev->port->modes, pi->pardev->port->base);
@@ -413,28 +418,26 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
 
 	dev_dbg(&pi->dev, "ppc_open returned %2x\n", out);
 
-  	if(out)
- 	{
+	if (out) {
 		bpck6_deselect(pi);
 		dev_dbg(&pi->dev, "leaving probe\n");
 		pi->mode = saved_mode;
-               return(1);
+		return 1;
 	}
-  	else
-  	{
-		dev_dbg(&pi->dev, "Failed open\n");
-		pi->mode = saved_mode;
-    		return(0);
-  	}
+
+	dev_dbg(&pi->dev, "Failed open\n");
+	pi->mode = saved_mode;
+
+	return 0;
 }
 
 static void bpck6_log_adapter(struct pi_adapter *pi)
 {
-	char *mode_string[5]=
-		{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-	dev_info(&pi->dev, "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
-		pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
+		 pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol bpck6 = {

drivers/ata/pata_parport/comm.c

-/* 
-        comm.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-	comm.c is a low-level protocol driver for some older models
-	of the DataStor "Commuter" parallel to IDE adapter.  Some of
-	the parallel port devices marketed by Arista currently
-	use this adapter.
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * comm.c is a low-level protocol driver for some older models of the DataStor
+ * "Commuter" parallel to IDE adapter. Some of the parallel port devices
+ * marketed by Arista currently use this adapter.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -17,165 +16,172 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads, 8-bit writes
-                1  8-bit reads and writes
-                2  8-bit EPP mode
-*/
+/*
+ * mode codes:  0  nybble reads, 8-bit writes
+ *              1  8-bit reads and writes
+ *              2  8-bit EPP mode
+ */
 
-#define j44(a,b)	(((a>>3)&0x0f)|((b<<1)&0xf0))
+#define j44(a, b)	(((a >> 3) & 0x0f) | ((b << 1) & 0xf0))
 
 #define P1	w2(5);w2(0xd);w2(0xd);w2(5);w2(4);
 #define P2	w2(5);w2(7);w2(7);w2(5);w2(4);
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x08, 0x10 };
 
 static int comm_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{       int     l, h, r;
+{
+	int l, h, r;
 
         r = regr + cont_map[cont];
 
-        switch (pi->mode)  {
+	switch (pi->mode) {
+	case 0:
+		w0(r); P1; w0(0);
+		w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
+		return j44(l, h);
 
-        case 0: w0(r); P1; w0(0);
-        	w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
-                return j44(l,h);
-
-        case 1: w0(r+0x20); P1; 
-        	w0(0); w2(0x26); h = r0(); w2(4);
-                return h;
+	case 1:
+		w0(r+0x20); P1;
+		w0(0); w2(0x26); h = r0(); w2(4);
+		return h;
 
 	case 2:
 	case 3:
-        case 4: w3(r+0x20); (void)r1();
-        	w2(0x24); h = r4(); w2(4);
-                return h;
+	case 4:
+		w3(r+0x20); (void)r1();
+		w2(0x24); h = r4(); w2(4);
+		return h;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void comm_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = regr + cont_map[cont];
 
-{       int  r;
-
-        r = regr + cont_map[cont];
-
-        switch (pi->mode)  {
-
-        case 0:
-        case 1: w0(r); P1; w0(val); P2;
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(r); P1; w0(val); P2;
 		break;
-
 	case 2:
 	case 3:
-        case 4: w3(r); (void)r1(); w4(val);
-                break;
-        }
+	case 4:
+		w3(r); (void)r1(); w4(val);
+		break;
+	}
 }
 
 static void comm_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-        w2(4); w0(0xff); w2(6);
-        w2(4); w0(0xaa); w2(6);
-        w2(4); w0(0x00); w2(6);
-        w2(4); w0(0x87); w2(6);
-        w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4); w0(0xff); w2(6);
+	w2(4); w0(0xaa); w2(6);
+	w2(4); w0(0x00); w2(6);
+	w2(4); w0(0x87); w2(6);
+	w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
 }
 
 static void comm_disconnect(struct pi_adapter *pi)
 
-{       w2(0); w2(0); w2(0); w2(4); 
+{
+	w2(0); w2(0); w2(0); w2(4);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static void comm_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int     i, l, h;
-
-        switch (pi->mode) {
-        
-        case 0: w0(0x48); P1;
-                for(i=0;i<count;i++) {
-                        w0(0); w2(6); l = r1();
-                        w0(0x80); h = r1(); w2(4);
-                        buf[i] = j44(l,h);
-                }
-                break;
-
-        case 1: w0(0x68); P1; w0(0);
-                for(i=0;i<count;i++) {
-                        w2(0x26); buf[i] = r0(); w2(0x24);
-                }
+{
+	int i, l, h;
+
+	switch (pi->mode) {
+	case 0:
+		w0(0x48); P1;
+		for (i = 0; i < count; i++) {
+			w0(0); w2(6); l = r1();
+			w0(0x80); h = r1(); w2(4);
+			buf[i] = j44(l, h);
+		}
+		break;
+	case 1:
+		w0(0x68); P1; w0(0);
+		for (i = 0; i < count; i++) {
+			w2(0x26);
+			buf[i] = r0();
+			w2(0x24);
+		}
 		w2(4);
 		break;
-		
-	case 2: w3(0x68); (void)r1(); w2(0x24);
-		for (i=0;i<count;i++) buf[i] = r4();
+	case 2:
+		w3(0x68); (void)r1(); w2(0x24);
+		for (i = 0; i < count; i++)
+			buf[i] = r4();
+		w2(4);
+		break;
+	case 3:
+		w3(0x68); (void)r1(); w2(0x24);
+		for (i = 0; i < count / 2; i++)
+			((u16 *)buf)[i] = r4w();
+		w2(4);
+		break;
+	case 4:
+		w3(0x68); (void)r1(); w2(0x24);
+		for (i = 0; i < count / 4; i++)
+			((u32 *)buf)[i] = r4l();
 		w2(4);
 		break;
-
-        case 3: w3(0x68); (void)r1(); w2(0x24);
-                for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
-                w2(4);
-                break;
-
-        case 4: w3(0x68); (void)r1(); w2(0x24);
-                for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
-                w2(4);
-                break;
-		
 	}
 }
 
 /* NB: Watch out for the byte swapped writes ! */
-
 static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int	k;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1: w0(0x68); P1;
-        	for (k=0;k<count;k++) {
-                        w2(5); w0(buf[k^1]); w2(7);
-                }
-                w2(5); w2(4);
-                break;
-
-        case 2: w3(0x48); (void)r1();
-                for (k=0;k<count;k++) w4(buf[k^1]);
-                break;
-
-        case 3: w3(0x48); (void)r1();
+{
+	int k;
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(0x68); P1;
+		for (k = 0; k < count; k++) {
+			w2(5);
+			w0(buf[k ^ 1]);
+			w2(7);
+		}
+		w2(5); w2(4);
+		break;
+	case 2:
+		w3(0x48); (void)r1();
+		for (k = 0; k < count; k++)
+			w4(buf[k ^ 1]);
+		break;
+	case 3:
+		w3(0x48); (void)r1();
 		for (k = 0; k < count / 2; k++)
 			w4w(swab16(((u16 *)buf)[k]));
-                break;
-
-        case 4: w3(0x48); (void)r1();
+		break;
+	case 4:
+		w3(0x48); (void)r1();
 		for (k = 0; k < count / 4; k++)
 			w4l(swab16(((u16 *)buf)[2 * k]) |
 			    swab16(((u16 *)buf)[2 * k + 1]) << 16);
-                break;
-
-
+		break;
         }
 }
 
 static void comm_log_adapter(struct pi_adapter *pi)
 
-{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+{       char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-	dev_info(&pi->dev, "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol comm = {

drivers/ata/pata_parport/dstr.c

-/* 
-        dstr.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        dstr.c is a low-level protocol driver for the 
-        DataStor EP2000 parallel to IDE adapter chip.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * dstr.c is a low-level protocol driver for the DataStor EP2000 parallel
+ * to IDE adapter chip.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -16,178 +15,202 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads, 8-bit writes
-                1  8-bit reads and writes
-                2  8-bit EPP mode
-		3  EPP-16
-		4  EPP-32
-*/
+/*
+ * mode codes:  0  nybble reads, 8-bit writes
+ *		1  8-bit reads and writes
+ *		2  8-bit EPP mode
+ *		3  EPP-16
+ *		4  EPP-32
+ */
 
-#define j44(a,b)  (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
+#define j44(a, b)  (((a >> 3) & 0x07) | ((~a >> 4) & 0x08) | \
+		    ((b << 1) & 0x70) | ((~b) & 0x80))
 
 #define P1	w2(5);w2(0xd);w2(5);w2(4);
 #define P2	w2(5);w2(7);w2(5);w2(4);
 #define P3      w2(6);w2(4);w2(6);w2(4);
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x20, 0x40 };
 
 static int dstr_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, r;
 
-{       int     a, b, r;
-
-        r = regr + cont_map[cont];
+	r = regr + cont_map[cont];
 
 	w0(0x81); P1;
-	if (pi->mode) { w0(0x11); } else { w0(1); }
+	if (pi->mode)
+		w0(0x11);
+	else
+		w0(1);
 	P2; w0(r); P1;
 
-        switch (pi->mode)  {
-
-        case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
-                return j44(a,b);
-
-        case 1: w0(0); w2(0x26); a = r0(); w2(4);
-                return a;
-
+	switch (pi->mode) {
+	case 0:
+		w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(0); w2(0x26); a = r0(); w2(4);
+		return a;
 	case 2:
 	case 3:
-        case 4: w2(0x24); a = r4(); w2(4);
-                return a;
+	case 4:
+		w2(0x24); a = r4(); w2(4);
+		return a;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void dstr_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int  r = regr + cont_map[cont];
 
-{       int  r;
-
-        r = regr + cont_map[cont];
-
-	w0(0x81); P1; 
-	if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
+	w0(0x81); P1;
+	if (pi->mode >= 2)
+		w0(0x11);
+	else
+		w0(1);
 	P2; w0(r); P1;
-	
-        switch (pi->mode)  {
 
-        case 0:
-        case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
+	switch (pi->mode)  {
+	case 0:
+	case 1:
+		w0(val); w2(5); w2(7); w2(5); w2(4);
 		break;
-
 	case 2:
 	case 3:
-        case 4: w4(val); 
-                break;
-        }
+	case 4:
+		w4(val);
+		break;
+	}
 }
 
-#define  CCP(x)  w0(0xff);w2(0xc);w2(4);\
-		 w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
-		 w0(x);w2(5);w2(4);
+#define  CCP(x)						\
+	do {						\
+		w0(0xff); w2(0xc); w2(4);		\
+		w0(0xaa); w0(0x55); w0(0); w0(0xff);	\
+		w0(0x87); w0(0x78);			\
+		w0(x); w2(5); w2(4);			\
+	} while (0)
 
 static void dstr_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-        w2(4); CCP(0xe0); w0(0xff);
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4); CCP(0xe0); w0(0xff);
 }
 
 static void dstr_disconnect(struct pi_adapter *pi)
-
-{       CCP(0x30);
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	CCP(0x30);
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void dstr_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int     k, a, b;
+{
+	int k, a, b;
 
         w0(0x81); P1;
-        if (pi->mode) { w0(0x19); } else { w0(9); }
+	if (pi->mode)
+		w0(0x19);
+	else
+		w0(9);
 	P2; w0(0x82); P1; P3; w0(0x20); P1;
 
-        switch (pi->mode) {
-
-        case 0: for (k=0;k<count;k++) {
-                        w2(6); a = r1(); w2(4);
-                        w2(6); b = r1(); w2(4);
-                        buf[k] = j44(a,b);
-                } 
-                break;
-
-        case 1: w0(0);
-                for (k=0;k<count;k++) {
-                        w2(0x26); buf[k] = r0(); w2(0x24);
-                }
-                w2(4);
-                break;
-
-        case 2: w2(0x24); 
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4);
-                break;
-
-        case 3: w2(0x24); 
-                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4);
-                break;
-
-        case 4: w2(0x24); 
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4);
-                break;
-
-        }
+	switch (pi->mode) {
+	case 0:
+		for (k = 0; k < count; k++) {
+			w2(6); a = r1(); w2(4);
+			w2(6); b = r1(); w2(4);
+			buf[k] = j44(a, b);
+		}
+		break;
+	case 1:
+		w0(0);
+		for (k = 0; k < count; k++) {
+			w2(0x26);
+			buf[k] = r0();
+			w2(0x24);
+		}
+		w2(4);
+		break;
+	case 2:
+		w2(0x24);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4);
+		break;
+	case 3:
+		w2(0x24);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4);
+		break;
+	case 4:
+		w2(0x24);
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4);
+		break;
+	}
 }
 
 static void dstr_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{       int	k;
-
-        w0(0x81); P1;
-        if (pi->mode) { w0(0x19); } else { w0(9); }
-        P2; w0(0x82); P1; P3; w0(0x20); P1;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1: for (k=0;k<count;k++) {
-                        w2(5); w0(buf[k]); w2(7);
-                }
-                w2(5); w2(4);
-                break;
+	w0(0x81); P1;
+	if (pi->mode)
+		w0(0x19);
+	else
+		w0(9);
+	P2; w0(0x82); P1; P3; w0(0x20); P1;
 
-        case 2: w2(0xc5);
-                for (k=0;k<count;k++) w4(buf[k]);
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		for (k = 0; k < count; k++) {
+			w2(5);
+			w0(buf[k]);
+			w2(7);
+		}
+		w2(5); w2(4);
+		break;
+	case 2:
+		w2(0xc5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(0xc4);
-                break;
-
-        case 3: w2(0xc5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        case 4: w2(0xc5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        }
+		break;
+	case 3:
+		w2(0xc5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(0xc4);
+		break;
+	case 4:
+		w2(0xc5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		w2(0xc4);
+		break;
+	}
 }
 
-
 static void dstr_log_adapter(struct pi_adapter *pi)
 
-{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
-				   "EPP-16","EPP-32"};
+{
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-	dev_info(&pi->dev, "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol dstr = {

drivers/ata/pata_parport/fit2.c

-/* 
-        fit2.c        (c) 1998  Grant R. Guenther <grant@torque.net>
-                          Under the terms of the GNU General Public License.
-
-	fit2.c is a low-level protocol driver for the older version
-        of the Fidelity International Technology parallel port adapter.  
-	This adapter is used in their TransDisk 2000 and older TransDisk
-	3000 portable hard-drives.  As far as I can tell, this device
-	supports 4-bit mode _only_.  
-
-	Newer models of the FIT products use an enhanced protocol.
-	The "fit3" protocol module should support current drives.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998  Grant R. Guenther <grant@torque.net>
+ *
+ * fit2.c is a low-level protocol driver for the older version
+ * of the Fidelity International Technology parallel port adapter.
+ * This adapter is used in their TransDisk 2000 and older TransDisk
+ * 3000 portable hard-drives.  As far as I can tell, this device
+ * supports 4-bit mode _only_.
+ *
+ * Newer models of the FIT products use an enhanced protocol.
+ * The "fit3" protocol module should support current drives.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -22,99 +21,97 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
-
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-NB:  The FIT adapter does not appear to use the control registers.
-So, we map ALT_STATUS to STATUS and NO-OP writes to the device
-control register - this means that IDE reset will not work on these
-devices.
-
-*/
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ *
+ * NB: The FIT adapter does not appear to use the control registers.
+ * So, we map ALT_STATUS to STATUS and NO-OP writes to the device
+ * control register - this means that IDE reset will not work on these
+ * devices.
+ */
 
 static void fit2_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	if (cont == 1) return;
+{
+	if (cont == 1)
+		return;
 	w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
 }
 
 static int fit2_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b, r;
+{
+	int  a, b, r;
 
 	if (cont) {
-	  if (regr != 6) return 0xff;
-	  r = 7;
-	} else r = regr + 0x10;
+		if (regr != 6)
+			return 0xff;
+		r = 7;
+	} else {
+		r = regr + 0x10;
+	}
 
-	w2(0xc); w0(r); w2(4); w2(5); 
-	         w0(0); a = r1();
-	         w0(1); b = r1();
+	w2(0xc); w0(r); w2(4); w2(5);
+	w0(0); a = r1();
+	w0(1); b = r1();
 	w2(4);
 
-	return j44(a,b);
-
+	return j44(a, b);
 }
 
 static void fit2_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, a, b, c, d;
+{
+	int  k, a, b, c, d;
 
 	w2(0xc); w0(0x10);
 
-	for (k=0;k<count/4;k++) {
-
+	for (k = 0; k < count / 4; k++) {
 		w2(4); w2(5);
 		w0(0); a = r1(); w0(1); b = r1();
-		w0(3); c = r1(); w0(2); d = r1(); 
-		buf[4*k+0] = j44(a,b);
-		buf[4*k+1] = j44(d,c);
-
-                w2(4); w2(5);
-                       a = r1(); w0(3); b = r1();
-                w0(1); c = r1(); w0(0); d = r1(); 
-                buf[4*k+2] = j44(d,c);
-                buf[4*k+3] = j44(a,b);
+		w0(3); c = r1(); w0(2); d = r1();
+		buf[4 * k + 0] = j44(a, b);
+		buf[4 * k + 1] = j44(d, c);
 
+		w2(4); w2(5);
+		a = r1(); w0(3); b = r1();
+		w0(1); c = r1(); w0(0); d = r1();
+		buf[4 * k + 2] = j44(d, c);
+		buf[4 * k + 3] = j44(a, b);
 	}
 
 	w2(4);
-
 }
 
 static void fit2_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{	int k;
-
-
-	w2(0xc); w0(0); 
-	for (k=0;k<count/2;k++) {
-		w2(4); w0(buf[2*k]); 
-		w2(5); w0(buf[2*k+1]);
+	w2(0xc); w0(0);
+	for (k = 0; k < count / 2; k++) {
+		w2(4); w0(buf[2 * k]);
+		w2(5); w0(buf[2 * k + 1]);
 	}
 	w2(4);
 }
 
 static void fit2_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-	w2(0xcc); 
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(0xcc);
 }
 
 static void fit2_disconnect(struct pi_adapter *pi)
-
-{       w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void fit2_log_adapter(struct pi_adapter *pi)
-
 {
 	dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n",
-		pi->port, pi->delay);
+		 pi->port, pi->delay);
 
 }
 

drivers/ata/pata_parport/fit3.c

-/* 
-        fit3.c        (c) 1998  Grant R. Guenther <grant@torque.net>
-                          Under the terms of the GNU General Public License.
-
-	fit3.c is a low-level protocol driver for newer models 
-        of the Fidelity International Technology parallel port adapter.  
-	This adapter is used in their TransDisk 3000 portable 
-	hard-drives, as well as CD-ROM, PD-CD and other devices.
-
-	The TD-2000 and certain older devices use a different protocol.
-	Try the fit2 protocol module with them.
-
-        NB:  The FIT adapters do not appear to support the control 
-	registers.  So, we map ALT_STATUS to STATUS and NO-OP writes 
-	to the device control register - this means that IDE reset 
-	will not work on these devices.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998  Grant R. Guenther <grant@torque.net>
+ *
+ * fit3.c is a low-level protocol driver for newer models
+ * of the Fidelity International Technology parallel port adapter.
+ * This adapter is used in their TransDisk 3000 portable
+ * hard-drives, as well as CD-ROM, PD-CD and other devices.
+ *
+ * The TD-2000 and certain older devices use a different protocol.
+ * Try the fit2 protocol module with them.
+ *
+ * NB:  The FIT adapters do not appear to support the control
+ * registers.  So, we map ALT_STATUS to STATUS and NO-OP writes
+ * to the device control register - this means that IDE reset
+ * will not work on these devices.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -26,152 +25,155 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)                (((a>>3)&0x0f)|((b<<1)&0xf0))
-
-#define w7(byte)                {out_p(7,byte);}
-#define r7()                    (in_p(7) & 0xff)
+#define j44(a, b)	(((a >> 3) & 0x0f) | ((b << 1) & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
+#define w7(byte)	out_p(7, byte)
+#define r7()		(in_p(7) & 0xff)
 
-*/
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 
 static void fit3_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	if (cont == 1) return;
+{
+	if (cont == 1)
+		return;
 
 	switch (pi->mode) {
-
 	case 0:
-	case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc); 
-		w0(val); w2(0xd); 
+	case 1:
+		w2(0xc); w0(regr); w2(0x8); w2(0xc);
+		w0(val); w2(0xd);
 		w0(0);   w2(0xc);
 		break;
-
-	case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+	case 2:
+		w2(0xc); w0(regr); w2(0x8); w2(0xc);
 		w4(val); w4(0);
 		w2(0xc);
 		break;
-
 	}
 }
 
 static int fit3_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b;
+{
+	int  a, b;
 
 	if (cont) {
-	  if (regr != 6) return 0xff;
-	  regr = 7;
-	} 
+		if (regr != 6)
+			return 0xff;
+		regr = 7;
+	}
 
 	switch (pi->mode) {
-
-	case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
+	case 0:
+		w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
 		w2(0xd); a = r1();
-		w2(0xf); b = r1(); 
+		w2(0xf); b = r1();
 		w2(0xc);
-		return j44(a,b);
-
-	case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
-		w2(0xec); w2(0xee); w2(0xef); a = r0(); 
+		return j44(a, b);
+	case 1:
+		w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+		w2(0xec); w2(0xee); w2(0xef); a = r0();
 		w2(0xc);
 		return a;
-
-	case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); 
-		w2(0xec); 
-		a = r4(); b = r4(); 
+	case 2:
+		w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+		w2(0xec);
+		a = r4(); b = r4();
 		w2(0xc);
 		return a;
-
 	}
-	return -1; 
 
+	return -1;
 }
 
 static void fit3_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, a, b, c, d;
+{
+	int  k, a, b, c, d;
 
 	switch (pi->mode) {
-
-	case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);
-		for (k=0;k<count/2;k++) {
-		    w2(0xd); a = r1();
-		    w2(0xf); b = r1();
-		    w2(0xc); c = r1();
-		    w2(0xe); d = r1();
-		    buf[2*k  ] = j44(a,b);
-		    buf[2*k+1] = j44(c,d);
+	case 0:
+		w2(0xc); w0(0x10); w2(0x8); w2(0xc);
+		for (k = 0; k < count / 2; k++) {
+			w2(0xd); a = r1();
+			w2(0xf); b = r1();
+			w2(0xc); c = r1();
+			w2(0xe); d = r1();
+			buf[2 * k] = j44(a, b);
+			buf[2 * k + 1] = j44(c, d);
 		}
 		w2(0xc);
 		break;
-
-	case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc); 
+	case 1:
+		w2(0xc); w0(0x90); w2(0x8); w2(0xc);
 		w2(0xec); w2(0xee);
-		for (k=0;k<count/2;k++) {
-		    w2(0xef); a = r0();
-		    w2(0xee); b = r0();
-                    buf[2*k  ] = a;
-                    buf[2*k+1] = b;
+		for (k = 0; k < count / 2; k++) {
+			w2(0xef); a = r0();
+			w2(0xee); b = r0();
+			buf[2 * k] = a;
+			buf[2 * k + 1] = b;
 		}
-		w2(0xec); 
+		w2(0xec);
 		w2(0xc);
 		break;
-
-	case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc); 
-                w2(0xec);
-		for (k=0;k<count;k++) buf[k] = r4();
-                w2(0xc);
+	case 2:
+		w2(0xc); w0(0x90); w2(0x8); w2(0xc);
+		w2(0xec);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(0xc);
 		break;
-
 	}
 }
 
 static void fit3_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{	int k;
-
-        switch (pi->mode) {
-
+	switch (pi->mode) {
 	case 0:
-        case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);
-                for (k=0;k<count/2;k++) {
- 		    w0(buf[2*k  ]); w2(0xd);
- 		    w0(buf[2*k+1]); w2(0xc);
+	case 1:
+		w2(0xc); w0(0); w2(0x8); w2(0xc);
+		for (k = 0; k < count / 2; k++) {
+			w0(buf[2 * k]); w2(0xd);
+			w0(buf[2 * k + 1]); w2(0xc);
 		}
 		break;
-
-        case 2: w2(0xc); w0(0); w2(0x8); w2(0xc); 
-                for (k=0;k<count;k++) w4(buf[k]);
-                w2(0xc);
+	case 2:
+		w2(0xc); w0(0); w2(0x8); w2(0xc);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
+		w2(0xc);
 		break;
 	}
 }
 
 static void fit3_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(0xc); w0(0); w2(0xa);
-	if (pi->mode == 2) { 
-		w2(0xc); w0(0x9); w2(0x8); w2(0xc); 
-		}
+	if (pi->mode == 2) {
+		w2(0xc); w0(0x9);
+		w2(0x8); w2(0xc);
+	}
 }
 
 static void fit3_disconnect(struct pi_adapter *pi)
-
-{       w2(0xc); w0(0xa); w2(0x8); w2(0xc);
+{
+	w2(0xc); w0(0xa); w2(0x8); w2(0xc);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static void fit3_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[3] = { "4-bit", "8-bit", "EPP"};
 
-{       char    *mode_string[3] = {"4-bit","8-bit","EPP"};
-
-	dev_info(&pi->dev, "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol fit3 = {

drivers/ata/pata_parport/friq.c

-/* 
-	friq.c	(c) 1998    Grant R. Guenther <grant@torque.net>
-		            Under the terms of the GNU General Public License
-
-	friq.c is a low-level protocol driver for the Freecom "IQ"
-	parallel port IDE adapter.   Early versions of this adapter
-	use the 'frpw' protocol.
-	
-	Freecom uses this adapter in a battery powered external 
-	CD-ROM drive.  It is also used in LS-120 drives by
-	Maxell and Panasonic, and other devices.
-
-	The battery powered drive requires software support to
-	control the power to the drive.  This module enables the
-	drive power when the high level driver (pcd) is loaded
-	and disables it when the module is unloaded.  Note, if
-	the friq module is built in to the kernel, the power
-	will never be switched off, so other means should be
-	used to conserve battery power.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998    Grant R. Guenther <grant@torque.net>
+ *
+ * friq.c is a low-level protocol driver for the Freecom "IQ"
+ * parallel port IDE adapter.   Early versions of this adapter
+ * use the 'frpw' protocol.
+ *
+ * Freecom uses this adapter in a battery powered external
+ * CD-ROM drive.  It is also used in LS-120 drives by
+ * Maxell and Panasonic, and other devices.
+ *
+ * The battery powered drive requires software support to
+ * control the power to the drive.  This module enables the
+ * drive power when the high level driver (pcd) is loaded
+ * and disables it when the module is unloaded.  Note, if
+ * the friq module is built in to the kernel, the power
+ * will never be switched off, so other means should be
+ * used to conserve battery power.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -29,197 +28,206 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define CMD(x)		w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
-			w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
+#define CMD(x)							\
+	do {							\
+		w2(4); w0(0xff); w0(0xff); w0(0x73); w0(0x73);	\
+		w0(0xc9); w0(0xc9); w0(0x26);			\
+		w0(0x26); w0(x); w0(x);				\
+	} while (0)
 
-#define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
+#define j44(l, h)	(((l >> 4) & 0x0f) | (h & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x08, 0x10 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x08, 0x10 };
 
 static int friq_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int	h,l,r;
+{
+	int h, l, r;
 
 	r = regr + cont_map[cont];
 
 	CMD(r);
 	w2(6); l = r1();
 	w2(4); h = r1();
-	w2(4); 
-
-	return j44(l,h);
+	w2(4);
 
+	return j44(l, h);
 }
 
 static void friq_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-        r = regr + cont_map[cont];
+{
+	int r = regr + cont_map[cont];
 
 	CMD(r);
 	w0(val);
-	w2(5);w2(7);w2(5);w2(4);
+	w2(5); w2(7); w2(5); w2(4);
 }
 
 static void friq_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
+{
+	int h, l, k, ph;
 
-{       int     h, l, k, ph;
-
-        switch(pi->mode) {
-
-        case 0: CMD(regr); 
-                for (k=0;k<count;k++) {
-                        w2(6); l = r1();
-                        w2(4); h = r1();
-                        buf[k] = j44(l,h);
-                }
-                w2(4);
-                break;
-
-        case 1: ph = 2;
-                CMD(regr+0xc0); 
-                w0(0xff);
-                for (k=0;k<count;k++) {
-                        w2(0xa4 + ph); 
-                        buf[k] = r0();
-                        ph = 2 - ph;
-                } 
-                w2(0xac); w2(0xa4); w2(4);
-                break;
-
-	case 2: CMD(regr+0x80);
-		for (k=0;k<count-2;k++) buf[k] = r4();
+	switch (pi->mode) {
+	case 0:
+		CMD(regr);
+		for (k = 0; k < count; k++) {
+			w2(6); l = r1();
+			w2(4); h = r1();
+			buf[k] = j44(l, h);
+		}
+		w2(4);
+		break;
+	case 1:
+		ph = 2;
+		CMD(regr + 0xc0);
+		w0(0xff);
+		for (k = 0; k < count; k++) {
+			w2(0xa4 + ph);
+			buf[k] = r0();
+			ph = 2 - ph;
+		}
+		w2(0xac); w2(0xa4); w2(4);
+		break;
+	case 2:
+		CMD(regr + 0x80);
+		for (k = 0; k < count - 2; k++)
+			buf[k] = r4();
 		w2(0xac); w2(0xa4);
-		buf[count-2] = r4();
-		buf[count-1] = r4();
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
 		w2(4);
 		break;
-
-	case 3: CMD(regr+0x80);
-                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-	case 4: CMD(regr+0x80);
-                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-                buf[count-4] = r4();
-                buf[count-3] = r4();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-        }
+	case 3:
+		CMD(regr + 0x80);
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+	case 4:
+		CMD(regr + 0x80);
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		buf[count - 4] = r4();
+		buf[count - 3] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+	}
 }
 
 static void friq_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	friq_read_block_int(pi,buf,count,0x08);
+{
+	friq_read_block_int(pi, buf, count, 0x08);
 }
 
 static void friq_write_block(struct pi_adapter *pi, char *buf, int count)
- 
-{	int	k;
-
-	switch(pi->mode) {
+{
+	int k;
 
+	switch (pi->mode) {
 	case 0:
-	case 1: CMD(8); w2(5);
-        	for (k=0;k<count;k++) {
+	case 1:
+		CMD(8); w2(5);
+		for (k = 0; k < count; k++) {
 			w0(buf[k]);
-			w2(7);w2(5);
+			w2(7); w2(5);
 		}
 		w2(4);
 		break;
-
-	case 2: CMD(0xc8); w2(5);
-		for (k=0;k<count;k++) w4(buf[k]);
+	case 2:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
+		w2(4);
+		break;
+	case 3:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(4);
+		break;
+	case 4:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
 		w2(4);
 		break;
-
-        case 3: CMD(0xc8); w2(5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(4);
-                break;
-
-        case 4: CMD(0xc8); w2(5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(4);
-                break;
-	}
+}
 }
 
 static void friq_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(4);
 }
 
 static void friq_disconnect(struct pi_adapter *pi)
-
-{       CMD(0x20);
+{
+	CMD(0x20);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static int friq_test_proto(struct pi_adapter *pi)
-
-{       int     j, k, r;
-	int	e[2] = {0,0};
+{
+	int j, k, r;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-	pi->saved_r0 = r0();	
+	pi->saved_r0 = r0();
 	w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
 	udelay(500);
 	w0(pi->saved_r0);
 
 	friq_connect(pi);
-	for (j=0;j<2;j++) {
-                friq_write_regr(pi,0,6,0xa0+j*0x10);
-                for (k=0;k<256;k++) {
-                        friq_write_regr(pi,0,2,k^0xaa);
-                        friq_write_regr(pi,0,3,k^0x55);
-                        if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
-                        }
-                }
+	for (j = 0; j < 2; j++) {
+		friq_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			friq_write_regr(pi, 0, 2, k ^ 0xaa);
+			friq_write_regr(pi, 0, 3, k ^ 0x55);
+			if (friq_read_regr(pi, 0, 2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
 	friq_disconnect(pi);
 
 	friq_connect(pi);
-        friq_read_block_int(pi,scratch,512,0x10);
-        r = 0;
-        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	friq_read_block_int(pi, scratch, 512, 0x10);
+	r = 0;
+	for (k = 0; k < 128; k++) {
+		if (scratch[k] != k)
+			r++;
+	}
 	friq_disconnect(pi);
 
-	dev_dbg(&pi->dev, "friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
-	       pi->port, pi->mode, e[0], e[1], r);
+	dev_dbg(&pi->dev,
+		"friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+		pi->port, pi->mode, e[0], e[1], r);
 
-        return (r || (e[0] && e[1]));
+	return r || (e[0] && e[1]);
 }
 
-
 static void friq_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[6] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32"};
 
-{       char    *mode_string[6] = {"4-bit","8-bit",
-				   "EPP-8","EPP-16","EPP-32"};
-
-	dev_info(&pi->dev, "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 
 	pi->private = 1;
 	friq_connect(pi);
 	CMD(0x9e);  		/* disable sleep timer */
 	friq_disconnect(pi);
-
 }
 
 static void friq_release_proto(struct pi_adapter *pi)

drivers/ata/pata_parport/kbic.c

+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
-        kbic.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        This is a low-level driver for the KBIC-951A and KBIC-971A
-        parallel to IDE adapter chips from KingByte Information Systems.
-
-	The chips are almost identical, however, the wakeup code 
-	required for the 971A interferes with the correct operation of
-        the 951A, so this driver registers itself twice, once for
-	each chip.
-
-*/
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * This is a low-level driver for the KBIC-951A and KBIC-971A
+ * parallel to IDE adapter chips from KingByte Information Systems.
+ *
+ * The chips are almost identical, however, the wakeup code
+ * required for the 971A interferes with the correct operation of
+ * the 951A, so this driver registers itself twice, once for
+ * each chip.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -21,212 +20,223 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define r12w()			(delay_p,inw(pi->port+1)&0xffff) 
+#define r12w()		(delay_p, inw(pi->port + 1) & 0xffff)
 
-#define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
-#define j53(w)                  (((w>>3)&0x1f)|((w>>4)&0xe0))
+#define j44(a, b)	((((a >> 4) & 0x0f) | (b & 0xf0)) ^ 0x88)
+#define j53(w)		(((w >> 3) & 0x1f) | ((w >> 4) & 0xe0))
 
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x80, 0x40 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x80, 0x40 };
 
 static int kbic_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, s;
 
-{       int     a, b, s;
-
-        s = cont_map[cont];
+	s = cont_map[cont];
 
 	switch (pi->mode) {
-
-	case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
-	        a = r1(); w0(0x28); b = r1(); w2(4);
-		return j44(a,b);
-
-	case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
+	case 0:
+		w0(regr | 0x18 | s); w2(4); w2(6); w2(4); w2(1); w0(8);
+		a = r1(); w0(0x28); b = r1(); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(regr|0x38 | s); w2(4); w2(6); w2(4); w2(5); w0(8);
 		a = r12w(); w2(4);
 		return j53(a);
-
-	case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
+	case 2:
+		w0(regr | 0x08 | s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
 		a = r0(); w2(4);
-       		return a;
-
+		return a;
 	case 3:
 	case 4:
-	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+	case 5:
+		w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
 		a = r4(); b = r4(); w2(4); w2(0); w2(4);
 		return a;
-
 	}
+
 	return -1;
-}       
+}
 
 static void kbic_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int s = cont_map[cont];
 
-{       int  s;
-
-        s = cont_map[cont];
-
-        switch (pi->mode) {
-
-	case 0: 
-        case 1:
-	case 2:	w0(regr|0x10|s); w2(4); w2(6); w2(4); 
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(regr | 0x10 | s); w2(4); w2(6); w2(4);
 		w0(val); w2(5); w2(4);
 		break;
-
 	case 3:
 	case 4:
-	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+	case 5:
+		w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
 		w4(val); w4(val);
 		w2(4); w2(0); w2(4);
-                break;
-
+		break;
 	}
 }
 
 static void k951_connect(struct pi_adapter *pi)
-
-{ 	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-        w2(4); 
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4);
 }
 
 static void k951_disconnect(struct pi_adapter *pi)
-
-{      	w0(pi->saved_r0);
-        w2(pi->saved_r2);
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
 }
 
-#define	CCP(x)	w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
-		w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
+#define	CCP(x)						\
+	do {						\
+		w2(0xc4); w0(0xaa); w0(0x55);		\
+		w0(0); w0(0xff); w0(0x87);		\
+		w0(0x78); w0(x); w2(0xc5);		\
+		w2(0xc4); w0(0xff);			\
+	} while (0)
 
 static void k971_connect(struct pi_adapter *pi)
-
-{ 	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	CCP(0x20);
-        w2(4); 
+	w2(4);
 }
 
 static void k971_disconnect(struct pi_adapter *pi)
-
-{       CCP(0x30);
+{
+	CCP(0x30);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
+	w2(pi->saved_r2);
 }
 
-/* counts must be congruent to 0 MOD 4, but all known applications
-   have this property.
-*/
-
+/*
+ * count must be congruent to 0 MOD 4, but all known applications
+ *have this property.
+ */
 static void kbic_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
 
-{       int     k, a, b;
-
-        switch (pi->mode) {
-
-        case 0: w0(0x98); w2(4); w2(6); w2(4);
-                for (k=0;k<count/2;k++) {
-			w2(1); w0(8);    a = r1();
-			       w0(0x28); b = r1();
-			buf[2*k]   = j44(a,b);
-			w2(5);           b = r1();
-			       w0(8);    a = r1();
-			buf[2*k+1] = j44(a,b);
+	switch (pi->mode) {
+	case 0:
+		w0(0x98); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(1); w0(8);
+			a = r1();
+			w0(0x28);
+			b = r1();
+			buf[2 * k] = j44(a, b);
+			w2(5);
+			b = r1();
+			w0(8);
+			a = r1();
+			buf[2 * k + 1] = j44(a, b);
 			w2(4);
-                } 
-                break;
-
-        case 1: w0(0xb8); w2(4); w2(6); w2(4); 
-                for (k=0;k<count/4;k++) {
-                        w0(0xb8); 
-			w2(4); w2(5); 
-                        w0(8);    buf[4*k]   = j53(r12w());
-			w0(0xb8); buf[4*k+1] = j53(r12w());
+		}
+		break;
+	case 1:
+		w0(0xb8); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 4; k++) {
+			w0(0xb8);
 			w2(4); w2(5);
-			          buf[4*k+3] = j53(r12w());
-			w0(8);    buf[4*k+2] = j53(r12w());
-                }
-                w2(4);
-                break;
-
-        case 2: w0(0x88); w2(4); w2(6); w2(4);
-                for (k=0;k<count/2;k++) {
-                        w2(0xa0); w2(0xa1); buf[2*k] = r0();
-                        w2(0xa5); buf[2*k+1] = r0();
-                }
-                w2(4);
-                break;
-
-        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4); w2(0); w2(4);
-                break;
-
-	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4); w2(0); w2(4);
-                break;
-
-        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4); w2(0); w2(4);
-                break;
-
-
-        }
+			w0(8);
+			buf[4 * k] = j53(r12w());
+			w0(0xb8);
+			buf[4 * k + 1] = j53(r12w());
+			w2(4); w2(5);
+			buf[4 * k + 3] = j53(r12w());
+			w0(8);
+			buf[4 * k + 2] = j53(r12w());
+		}
+		w2(4);
+		break;
+	case 2:
+		w0(0x88); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(0xa0); w2(0xa1);
+			buf[2 * k] = r0();
+			w2(0xa5);
+			buf[2 * k + 1] = r0();
+		}
+		w2(4);
+		break;
+	case 3:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4); w2(0); w2(4);
+		break;
+	case 4:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4); w2(0); w2(4);
+		break;
+	case 5:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4); w2(0); w2(4);
+		break;
+	}
 }
 
 static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{       int     k;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1:
-        case 2: w0(0x90); w2(4); w2(6); w2(4); 
-		for(k=0;k<count/2;k++) {
-			w0(buf[2*k+1]); w2(0); w2(4); 
-			w0(buf[2*k]);   w2(5); w2(4); 
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(0x90); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w0(buf[2 * k + 1]);
+			w2(0); w2(4);
+			w0(buf[2 * k]);
+			w2(5); w2(4);
 		}
 		break;
-
-        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-		for(k=0;k<count/2;k++) {
-			w4(buf[2*k+1]); 
-                        w4(buf[2*k]);
-                }
+	case 3:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++) {
+			w4(buf[2 * k + 1]);
+			w4(buf[2 * k]);
+		}
 		w2(4); w2(0); w2(4);
 		break;
-
-	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+	case 4:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 		for (k = 0; k < count / 2; k++)
 			w4w(swab16(((u16 *)buf)[k]));
-                w2(4); w2(0); w2(4);
-                break;
-
-        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		w2(4); w2(0); w2(4);
+		break;
+	case 5:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 		for (k = 0; k < count / 4; k++)
 			w4l(swab16(((u16 *)buf)[2 * k]) |
 			    swab16(((u16 *)buf)[2 * k + 1]) << 16);
-                w2(4); w2(0); w2(4);
-                break;
-
-        }
-
+		w2(4); w2(0); w2(4);
+		break;
+	}
 }
 
 static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
-
-{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
-				   "EPP-8","EPP_16","EPP-32"};
+{
+	char *mode[6] = { "4-bit", "5/3", "8-bit", "EPP-8", "EPP_16", "EPP-32"};
 
 	dev_info(&pi->dev, "KingByte %s at 0x%x, mode %d (%s), delay %d\n",
-		 chip, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+		 chip, pi->port, pi->mode, mode[pi->mode], pi->delay);
 }
 
 static void k951_log_adapter(struct pi_adapter *pi)

drivers/ata/pata_parport/ktti.c

-/* 
-        ktti.c        (c) 1998  Grant R. Guenther <grant@torque.net>
-                          Under the terms of the GNU General Public License.
-
-	ktti.c is a low-level protocol driver for the KT Technology
-	parallel port adapter.  This adapter is used in the "PHd" 
-        portable hard-drives.  As far as I can tell, this device
-	supports 4-bit mode _only_.  
-
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998  Grant R. Guenther <grant@torque.net>
+ *
+ * ktti.c is a low-level protocol driver for the KT Technology
+ * parallel port adapter.  This adapter is used in the "PHd"
+ * portable hard-drives.  As far as I can tell, this device
+ * supports 4-bit mode _only_.
 */
 
 #include <linux/module.h>
@@ -18,80 +17,76 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x10, 0x08 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x10, 0x08 };
 
 static void ktti_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = regr + cont_map[cont];
 
-{	int r;
-
-	r = regr + cont_map[cont];
-
-	w0(r); w2(0xb); w2(0xa); w2(3); w2(6); 
+	w0(r); w2(0xb); w2(0xa); w2(3); w2(6);
 	w0(val); w2(3); w0(0); w2(6); w2(0xb);
 }
 
 static int ktti_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b, r;
+{
+	int a, b, r;
 
         r = regr + cont_map[cont];
 
-        w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9); 
+	w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
 	a = r1(); w2(0xc);  b = r1(); w2(9); w2(0xc); w2(9);
-	return j44(a,b);
-
+	return j44(a, b);
 }
 
 static void ktti_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
 
-{	int  k, a, b;
-
-	for (k=0;k<count/2;k++) {
+	for (k = 0; k < count / 2; k++) {
 		w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
 		a = r1(); w2(0xc); b = r1(); w2(9);
-		buf[2*k] = j44(a,b);
+		buf[2*k] = j44(a, b);
 		a = r1(); w2(0xc); b = r1(); w2(9);
-		buf[2*k+1] = j44(a,b);
+		buf[2*k+1] = j44(a, b);
 	}
 }
 
 static void ktti_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{	int k;
-
-	for (k=0;k<count/2;k++) {
+	for (k = 0; k < count / 2; k++) {
 		w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
-		w0(buf[2*k]); w2(3);
-		w0(buf[2*k+1]); w2(6);
+		w0(buf[2 * k]); w2(3);
+		w0(buf[2 * k + 1]); w2(6);
 		w2(0xb);
 	}
 }
 
 static void ktti_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-	w2(0xb); w2(0xa); w0(0); w2(3); w2(6);	
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(0xb); w2(0xa); w0(0); w2(3); w2(6);
 }
 
 static void ktti_disconnect(struct pi_adapter *pi)
-
-{       w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
+{
+	w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static void ktti_log_adapter(struct pi_adapter *pi)
-
 {
 	dev_info(&pi->dev, "KT adapter at 0x%x, delay %d\n",
-		pi->port, pi->delay);
+		 pi->port, pi->delay);
 }
 
 static struct pi_protocol ktti = {

drivers/ata/pata_platform.c

@@ -223,7 +223,7 @@ static int pata_platform_probe(struct platform_device *pdev)
 
 static struct platform_driver pata_platform_driver = {
 	.probe		= pata_platform_probe,
-	.remove		= ata_platform_remove_one,
+	.remove_new	= ata_platform_remove_one,
 	.driver = {
 		.name		= DRV_NAME,
 	},

drivers/ata/sata_highbank.c

@@ -614,7 +614,7 @@ static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
 		  ahci_highbank_suspend, ahci_highbank_resume);
 
 static struct platform_driver ahci_highbank_driver = {
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
         .driver = {
                 .name = "highbank-ahci",
                 .of_match_table = ahci_of_match,

drivers/scsi/libsas/sas_scsi_host.c

@@ -872,8 +872,7 @@ int sas_change_queue_depth(struct scsi_device *sdev, int depth)
 	struct domain_device *dev = sdev_to_domain_dev(sdev);
 
 	if (dev_is_sata(dev))
-		return ata_change_queue_depth(dev->sata_dev.ap,
-					      sas_to_ata_dev(dev), sdev, depth);
+		return ata_change_queue_depth(dev->sata_dev.ap, sdev, depth);
 
 	if (!sdev->tagged_supported)
 		depth = 1;