Commit 1561f207 authored by Simon Horman's avatar Simon Horman

arm64: dts: r8a7796: Add Renesas R8A7796 SoC support

Basic support for the Gen 3 R-Car M3-W SoC.

Based on work for the r8a7795 and r8a7796 SoCs by
Takeshi Kihara, Dirk Behme and Geert Uytterhoeven.
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
parent 162cd784
......@@ -29,6 +29,8 @@ SoCs:
compatible = "renesas,r8a7794"
- R-Car H3 (R8A77950)
compatible = "renesas,r8a7795"
- R-Car M3-W (R8A77960)
compatible = "renesas,r8a7796"
Boards:
......@@ -61,5 +63,7 @@ Boards:
compatible = "renesas,porter", "renesas,r8a7791"
- Salvator-X (RTP0RC7795SIPB0010S)
compatible = "renesas,salvator-x", "renesas,r8a7795";
- Salvator-X
compatible = "renesas,salvator-x", "renesas,r8a7796";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
......@@ -121,6 +121,12 @@ config ARCH_R8A7795
help
This enables support for the Renesas R-Car H3 SoC.
config ARCH_R8A7796
bool "Renesas R-Car M3-W SoC Platform"
depends on ARCH_RENESAS
help
This enables support for the Renesas R-Car M3-W SoC.
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
help
......
/*
* Device Tree Source for the r8a7796 SoC
*
* Copyright (C) 2016 Renesas Electronics Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <dt-bindings/clock/r8a7796-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "renesas,r8a7796";
#address-cells = <2>;
#size-cells = <2>;
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
/* 1 core only at this point */
a57_0: cpu@0 {
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
device_type = "cpu";
next-level-cache = <&L2_CA57>;
enable-method = "psci";
};
L2_CA57: cache-controller@0 {
compatible = "cache";
reg = <0>;
cache-unified;
cache-level = <2>;
};
};
extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0x0 0xf1010000 0 0x1000>,
<0x0 0xf1020000 0 0x20000>,
<0x0 0xf1040000 0 0x20000>,
<0x0 0xf1060000 0 0x20000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
};
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a7796-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
clocks = <&extal_clk>, <&extalr_clk>;
clock-names = "extal", "extalr";
#clock-cells = <2>;
#power-domain-cells = <0>;
};
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a7796",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 310>,
<&cpg CPG_CORE R8A7796_CLK_S3D1>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg>;
status = "disabled";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment