Commit 156fa884 authored by Michael Tretter's avatar Michael Tretter Committed by Mauro Carvalho Chehab

media: dt-bindings: media: document allegro-dvt bindings

Add device-tree bindings for the Allegro DVT video IP core found on the
Xilinx ZynqMP EV family.
Signed-off-by: default avatarMichael Tretter <m.tretter@pengutronix.de>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 26989c27
Device-tree bindings for the Allegro DVT video IP codecs present in the Xilinx
ZynqMP SoC. The IP core may either be a H.264/H.265 encoder or H.264/H.265
decoder ip core.
Each actual codec engines is controlled by a microcontroller (MCU). Host
software uses a provided mailbox interface to communicate with the MCU. The
MCU share an interrupt.
Required properties:
- compatible: value should be one of the following
"allegro,al5e-1.1", "allegro,al5e": encoder IP core
"allegro,al5d-1.1", "allegro,al5d": decoder IP core
- reg: base and length of the memory mapped register region and base and
length of the memory mapped sram
- reg-names: must include "regs" and "sram"
- interrupts: shared interrupt from the MCUs to the processing system
- clocks: must contain an entry for each entry in clock-names
- clock-names: must include "core_clk", "mcu_clk", "m_axi_core_aclk",
"m_axi_mcu_aclk", "s_axi_lite_aclk"
Example:
al5e: video-codec@a0009000 {
compatible = "allegro,al5e-1.1", "allegro,al5e";
reg = <0 0xa0009000 0 0x1000>,
<0 0xa0000000 0 0x8000>;
reg-names = "regs", "sram";
interrupts = <0 96 4>;
clocks = <&xlnx_vcu 0>, <&xlnx_vcu 1>,
<&clkc 71>, <&clkc 71>, <&clkc 71>;
clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
"m_axi_mcu_aclk", "s_axi_lite_aclk"
};
al5d: video-codec@a0029000 {
compatible = "allegro,al5d-1.1", "allegro,al5d";
reg = <0 0xa0029000 0 0x1000>,
<0 0xa0020000 0 0x8000>;
reg-names = "regs", "sram";
interrupts = <0 96 4>;
clocks = <&xlnx_vcu 2>, <&xlnx_vcu 3>,
<&clkc 71>, <&clkc 71>, <&clkc 71>;
clock-names = "core_clk", "mcu_clk", "m_axi_core_aclk",
"m_axi_mcu_aclk", "s_axi_lite_aclk"
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment