Commit 15ac49b6 authored by Russell King's avatar Russell King

ARM: Fix undefined instruction exception handling

While trying to get a v3.5 kernel booted on the cubox, I noticed that
VFP does not work correctly with VFP bounce handling.  This is because
of the confusion over 16-bit vs 32-bit instructions, and where PC is
supposed to point to.

The rule is that FP handlers are entered with regs->ARM_pc pointing at
the _next_ instruction to be executed.  However, if the exception is
not handled, regs->ARM_pc points at the faulting instruction.

This is easy for ARM mode, because we know that the next instruction and
previous instructions are separated by four bytes.  This is not true of
Thumb2 though.

Since all FP instructions are 32-bit in Thumb2, it makes things easy.
We just need to select the appropriate adjustment.  Do this by moving
the adjustment out of do_undefinstr() into the assembly code, as only
the assembly code knows whether it's dealing with a 32-bit or 16-bit
instruction.

Cc: <stable@vger.kernel.org>
Acked-by: default avatarWill Deacon <will.deacon@arm.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent c5dff4ff
......@@ -244,6 +244,19 @@ svc_preempt:
b 1b
#endif
__und_fault:
@ Correct the PC such that it is pointing at the instruction
@ which caused the fault. If the faulting instruction was ARM
@ the PC will be pointing at the next instruction, and have to
@ subtract 4. Otherwise, it is Thumb, and the PC will be
@ pointing at the second half of the Thumb instruction. We
@ have to subtract 2.
ldr r2, [r0, #S_PC]
sub r2, r2, r1
str r2, [r0, #S_PC]
b do_undefinstr
ENDPROC(__und_fault)
.align 5
__und_svc:
#ifdef CONFIG_KPROBES
......@@ -261,25 +274,32 @@ __und_svc:
@
@ r0 - instruction
@
#ifndef CONFIG_THUMB2_KERNEL
#ifndef CONFIG_THUMB2_KERNEL
ldr r0, [r4, #-4]
#else
mov r1, #2
ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2
cmp r0, #0xe800 @ 32-bit instruction if xx >= 0
ldrhhs r9, [r4] @ bottom 16 bits
orrhs r0, r9, r0, lsl #16
blo __und_svc_fault
ldrh r9, [r4] @ bottom 16 bits
add r4, r4, #2
str r4, [sp, #S_PC]
orr r0, r9, r0, lsl #16
#endif
adr r9, BSYM(1f)
adr r9, BSYM(__und_svc_finish)
mov r2, r4
bl call_fpe
mov r1, #4 @ PC correction to apply
__und_svc_fault:
mov r0, sp @ struct pt_regs *regs
bl do_undefinstr
bl __und_fault
@
@ IRQs off again before pulling preserved data off the stack
@
1: disable_irq_notrace
__und_svc_finish:
disable_irq_notrace
@
@ restore SPSR and restart the instruction
......@@ -423,25 +443,33 @@ __und_usr:
mov r2, r4
mov r3, r5
@ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
@ faulting instruction depending on Thumb mode.
@ r3 = regs->ARM_cpsr
@
@ fall through to the emulation code, which returns using r9 if
@ it has emulated the instruction, or the more conventional lr
@ if we are to treat this as a real undefined instruction
@
@ r0 - instruction
@ The emulation code returns using r9 if it has emulated the
@ instruction, or the more conventional lr if we are to treat
@ this as a real undefined instruction
@
adr r9, BSYM(ret_from_exception)
adr lr, BSYM(__und_usr_unknown)
tst r3, #PSR_T_BIT @ Thumb mode?
itet eq @ explicit IT needed for the 1f label
subeq r4, r2, #4 @ ARM instr at LR - 4
subne r4, r2, #2 @ Thumb instr at LR - 2
1: ldreqt r0, [r4]
bne __und_usr_thumb
sub r4, r2, #4 @ ARM instr at LR - 4
1: ldrt r0, [r4]
#ifdef CONFIG_CPU_ENDIAN_BE8
reveq r0, r0 @ little endian instruction
rev r0, r0 @ little endian instruction
#endif
beq call_fpe
@ r0 = 32-bit ARM instruction which caused the exception
@ r2 = PC value for the following instruction (:= regs->ARM_pc)
@ r4 = PC value for the faulting instruction
@ lr = 32-bit undefined instruction function
adr lr, BSYM(__und_usr_fault_32)
b call_fpe
__und_usr_thumb:
@ Thumb instruction
sub r4, r2, #2 @ First half of thumb instr at LR - 2
#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
/*
* Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms
......@@ -455,7 +483,7 @@ __und_usr:
ldr r5, .LCcpu_architecture
ldr r5, [r5]
cmp r5, #CPU_ARCH_ARMv7
blo __und_usr_unknown
blo __und_usr_fault_16 @ 16bit undefined instruction
/*
* The following code won't get run unless the running CPU really is v7, so
* coding round the lack of ldrht on older arches is pointless. Temporarily
......@@ -463,15 +491,18 @@ __und_usr:
*/
.arch armv6t2
#endif
2:
ARM( ldrht r5, [r4], #2 )
THUMB( ldrht r5, [r4] )
THUMB( add r4, r4, #2 )
2: ldrht r5, [r4]
cmp r5, #0xe800 @ 32bit instruction if xx != 0
blo __und_usr_unknown
3: ldrht r0, [r4]
blo __und_usr_fault_16 @ 16bit undefined instruction
3: ldrht r0, [r2]
add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
orr r0, r0, r5, lsl #16
adr lr, BSYM(__und_usr_fault_32)
@ r0 = the two 16-bit Thumb instructions which caused the exception
@ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
@ r4 = PC value for the first 16-bit Thumb instruction
@ lr = 32bit undefined instruction function
#if __LINUX_ARM_ARCH__ < 7
/* If the target arch was overridden, change it back: */
......@@ -482,17 +513,13 @@ __und_usr:
#endif
#endif /* __LINUX_ARM_ARCH__ < 7 */
#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
b __und_usr_unknown
b __und_usr_fault_16
#endif
UNWIND(.fnend )
UNWIND(.fnend)
ENDPROC(__und_usr)
@
@ fallthrough to call_fpe
@
/*
* The out of line fixup for the ldrt above.
* The out of line fixup for the ldrt instructions above.
*/
.pushsection .fixup, "ax"
.align 2
......@@ -524,11 +551,12 @@ ENDPROC(__und_usr)
* NEON handler code.
*
* Emulators may wish to make use of the following registers:
* r0 = instruction opcode.
* r2 = PC+4
* r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
* r2 = PC value to resume execution after successful emulation
* r9 = normal "successful" return address
* r10 = this threads thread_info structure.
* r10 = this threads thread_info structure
* lr = unrecognised instruction return address
* IRQs disabled, FIQs enabled.
*/
@
@ Fall-through from Thumb-2 __und_usr
......@@ -659,12 +687,17 @@ ENTRY(no_fp)
mov pc, lr
ENDPROC(no_fp)
__und_usr_unknown:
enable_irq
__und_usr_fault_32:
mov r1, #4
b 1f
__und_usr_fault_16:
mov r1, #2
1: enable_irq
mov r0, sp
adr lr, BSYM(ret_from_exception)
b do_undefinstr
ENDPROC(__und_usr_unknown)
b __und_fault
ENDPROC(__und_usr_fault_32)
ENDPROC(__und_usr_fault_16)
.align 5
__pabt_usr:
......
......@@ -370,18 +370,10 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
{
unsigned int correction = thumb_mode(regs) ? 2 : 4;
unsigned int instr;
siginfo_t info;
void __user *pc;
/*
* According to the ARM ARM, PC is 2 or 4 bytes ahead,
* depending whether we're in Thumb mode or not.
* Correct this offset.
*/
regs->ARM_pc -= correction;
pc = (void __user *)instruction_pointer(regs);
if (processor_mode(regs) == SVC_MODE) {
......
......@@ -7,18 +7,20 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Basic entry code, called from the kernel's undefined instruction trap.
* r0 = faulted instruction
* r5 = faulted PC+4
* r9 = successful return
* r10 = thread_info structure
* lr = failure return
*/
#include <asm/thread_info.h>
#include <asm/vfpmacros.h>
#include "../kernel/entry-header.S"
@ VFP entry point.
@
@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
@ r2 = PC value to resume execution after successful emulation
@ r9 = normal "successful" return address
@ r10 = this threads thread_info structure
@ lr = unrecognised instruction return address
@ IRQs disabled.
@
ENTRY(do_vfp)
#ifdef CONFIG_PREEMPT
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
......
......@@ -61,13 +61,13 @@
@ VFP hardware support entry point.
@
@ r0 = faulted instruction
@ r2 = faulted PC+4
@ r9 = successful return
@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
@ r2 = PC value to resume execution after successful emulation
@ r9 = normal "successful" return address
@ r10 = vfp_state union
@ r11 = CPU number
@ lr = failure return
@ lr = unrecognised instruction return address
@ IRQs enabled.
ENTRY(vfp_support_entry)
DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
......@@ -161,9 +161,12 @@ vfp_hw_state_valid:
@ exception before retrying branch
@ out before setting an FPEXC that
@ stops us reading stuff
VFPFMXR FPEXC, r1 @ restore FPEXC last
sub r2, r2, #4
str r2, [sp, #S_PC] @ retry the instruction
VFPFMXR FPEXC, r1 @ Restore FPEXC last
sub r2, r2, #4 @ Retry current instruction - if Thumb
str r2, [sp, #S_PC] @ mode it's two 16-bit instructions,
@ else it's one 32-bit instruction, so
@ always subtract 4 from the following
@ instruction address.
#ifdef CONFIG_PREEMPT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment