Commit 15d51931 authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman

staging: comedi: ni_mio_common: fix AO timer off-by-one regression

As reported by Éric Piel on the Comedi mailing list (see
<https://groups.google.com/forum/#!topic/comedi_list/ueZiR7vTLOU/discussion>),
the analog output asynchronous commands are running too fast with a
period 50 ns shorter than it should be.  This affects all boards with AO
command support that are supported by the "ni_pcimio", "ni_atmio", and
"ni_mio_cs" drivers.

This is a regression bug introduced by commit 080e6795 ("staging:
comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd"), specifically,
this line in `ni_ao_cmd_set_update()`:

		/* following line: N-1 per STC */
		ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);

The `trigvar` variable value comes from a call to `ni_ns_to_timer()`
which converts a timer period in nanoseconds to a hardware divisor
value. The function already reduces the divisor by 1 as required by the
hardware, so the above line should not reduce it further by 1.  Fix it
by replacing `trigvar` by `trigvar - 1` in the above line, and remove
the misleading comment.
Reported-by: default avatarÉric Piel <piel@delmic.com>
Fixes: 080e6795 ("staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd")
Cc: Éric Piel <piel@delmic.com>
Cc: Spencer E. Olson <olsonse@umich.edu>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5771a8c0
...@@ -3116,8 +3116,7 @@ static void ni_ao_cmd_set_update(struct comedi_device *dev, ...@@ -3116,8 +3116,7 @@ static void ni_ao_cmd_set_update(struct comedi_device *dev,
/* following line: 2-1 per STC */ /* following line: 2-1 per STC */
ni_stc_writel(dev, 1, NISTC_AO_UI_LOADA_REG); ni_stc_writel(dev, 1, NISTC_AO_UI_LOADA_REG);
ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD, NISTC_AO_CMD1_REG); ni_stc_writew(dev, NISTC_AO_CMD1_UI_LOAD, NISTC_AO_CMD1_REG);
/* following line: N-1 per STC */ ni_stc_writel(dev, trigvar, NISTC_AO_UI_LOADA_REG);
ni_stc_writel(dev, trigvar - 1, NISTC_AO_UI_LOADA_REG);
} else { /* TRIG_EXT */ } else { /* TRIG_EXT */
/* FIXME: assert scan_begin_arg != 0, ret failure otherwise */ /* FIXME: assert scan_begin_arg != 0, ret failure otherwise */
devpriv->ao_cmd2 |= NISTC_AO_CMD2_BC_GATE_ENA; devpriv->ao_cmd2 |= NISTC_AO_CMD2_BC_GATE_ENA;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment