Skip to content

L
linux
Commit 15d68e8c authored by Andrew Bresticker's avatar Andrew Bresticker Committed by Thierry Reding
Browse files
Options

clk: tegra: Initialize UTMI PLL when enabling PLLU 

Move the UTMI PLL initialization code form clk-tegra<chip>.c files into
clk-pll.c. UTMI PLL was being configured and set in HW control right
after registration. However, when the clock init_table is processed and
child clks of PLLU are enabled, it will call in and enable PLLU as
well, and initiate SW enabling sequence even though PLLU is already in
HW control. This leads to getting UTMIPLL stuck with a SEQ_BUSY status.

Doing the initialization once during pllu_enable means we configure it
properly into HW control.

A side effect of the commonization/localization of the UTMI PLL init
code, is that it corrects some errors that were present for earlier
generations. For instance, in clk-tegra124.c, it used to have:

    #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)

when the correct shift to use is present in the new version:

    #define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)

which matches the Tegra124 TRM register definition.
Signed-off-by: default avatarAndrew Bresticker <abrestic@chromium.org>
[rklein: Merged in some later fixes for potential deadlocks]
Signed-off-by: default avatarRhyland Klein <rklein@nvidia.com>
[treding: coding style bike-shedding, remove unused variable]
Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
parent 74d3ba0b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 531 additions and 598 deletions
drivers/clk/tegra/clk-pll.c
View file @ 15d68e8c
This diff is collapsed.
drivers/clk/tegra/clk-tegra114.c
View file @ 15d68e8c
......@@ -113,32 +113,6 @@
#define CCLKG_BURST_POLICY 0x368
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define UTMIPLL_HW_PWRDN_CFG0 0x52c
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
#define CLK_SOURCE_CSITE 0x1d4
#define CLK_SOURCE_EMC 0x19c
......@@ -649,43 +623,6 @@ static unsigned long tegra114_input_freq[] = {
#define MASK(x) (BIT(x) - 1)
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u8 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u8 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x04,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
/* peripheral mux definitions */
static const char *mux_plld_out0_plld2_out0[] = {
......@@ -986,92 +923,9 @@ static void __init tegra114_fixed_clk_init(void __iomem *clk_base)
}
static __init void tegra114_utmi_param_configure(void __iomem *clk_base)
{
unsigned int i;
u32 reg;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (osc_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
osc_freq);
return;
}
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
active_delay_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
xtal_freq_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
/* Setup HW control of UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
udelay(1);
/* Setup SW override of UTMIPLL assuming USB2.0
ports are assigned to USB2 */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
udelay(1);
/* Enable HW control UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
}
static void __init tegra114_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
u32 val;
struct clk *clk;
/* PLLC */
......@@ -1118,16 +972,10 @@ static void __init tegra114_pll_init(void __iomem *clk_base,
CLK_SET_RATE_PARENT, 1, 1);
/* PLLU */
val = readl(clk_base + pll_u_params.base_reg);
val &= ~BIT(24); /* disable PLLU_OVERRIDE */
writel(val, clk_base + pll_u_params.base_reg);
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
&pll_u_params, &pll_u_lock);
clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
&pll_u_params, &pll_u_lock);
clks[TEGRA114_CLK_PLL_U] = clk;
tegra114_utmi_param_configure(clk_base);
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
......
drivers/clk/tegra/clk-tegra124.c
View file @ 15d68e8c
......@@ -99,32 +99,6 @@
#define CCLKG_BURST_POLICY 0x368
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define UTMIPLL_HW_PWRDN_CFG0 0x52c
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE BIT(25)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE BIT(24)
#define UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET BIT(6)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_RESET_INPUT_VALUE BIT(5)
#define UTMIPLL_HW_PWRDN_CFG0_SEQ_IN_SWCTL BIT(4)
#define UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL BIT(2)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE BIT(1)
#define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL BIT(0)
/* Tegra CPU clock and reset control regs */
#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470
......@@ -764,43 +738,6 @@ static struct tegra_clk_pll_params pll_u_params = {
TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
};
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u8 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u8 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x04,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA124_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA124_CLK_RTC, .present = true },
......@@ -1063,88 +1000,6 @@ static struct tegra_devclk devclks[] __initdata = {
static struct clk **clks;
static void tegra124_utmi_param_configure(void __iomem *clk_base)
{
unsigned int i;
u32 reg;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (osc_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
osc_freq);
return;
}
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
active_delay_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
xtal_freq_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
/* Setup HW control of UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_START_STATE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
udelay(1);
/* Setup SW override of UTMIPLL assuming USB2.0
ports are assigned to USB2 */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
udelay(1);
/* Enable HW control UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
}
static __init void tegra124_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
......@@ -1195,7 +1050,6 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base,
static void __init tegra124_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
u32 val;
struct clk *clk;
/* PLLC */
......@@ -1256,17 +1110,11 @@ static void __init tegra124_pll_init(void __iomem *clk_base,
clks[TEGRA124_CLK_PLL_M_UD] = clk;
/* PLLU */
val = readl(clk_base + pll_u_params.base_reg);
val &= ~BIT(24); /* disable PLLU_OVERRIDE */
writel(val, clk_base + pll_u_params.base_reg);
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc, 0,
&pll_u_params, &pll_u_lock);
clk = tegra_clk_register_pllu_tegra114("pll_u", "pll_ref", clk_base, 0,
&pll_u_params, &pll_u_lock);
clk_register_clkdev(clk, "pll_u", NULL);
clks[TEGRA124_CLK_PLL_U] = clk;
tegra124_utmi_param_configure(clk_base);
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
......
drivers/clk/tegra/clk-tegra210.c
View file @ 15d68e8c
......@@ -155,27 +155,6 @@
#define PMC_PLLM_WB0_OVERRIDE 0x1dc
#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP BIT(1)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP BIT(3)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERUP BIT(5)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN BIT(24)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP BIT(25)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERUP BIT(17)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP BIT(15)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define SATA_PLL_CFG0 0x490
#define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0)
#define SATA_PLL_CFG0_PADPLL_USE_LOCKDET BIT(2)
......@@ -2038,47 +2017,6 @@ static struct tegra_clk_pll_params pll_u_vco_params = {
.calc_rate = tegra210_pll_fixed_mdiv_cfg,
};
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u16 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u16 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 38400000, .enable_delay_count = 0x0,
.stable_count = 0x0, .active_delay_count = 0x6,
.xtal_freq_count = 0x80
}, {
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x08,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
static struct tegra_clk tegra210_clks[tegra_clk_max] __initdata = {
[tegra_clk_ispb] = { .dt_id = TEGRA210_CLK_ISPB, .present = true },
[tegra_clk_rtc] = { .dt_id = TEGRA210_CLK_RTC, .present = true },
......@@ -2348,114 +2286,6 @@ static struct tegra_audio_clk_info tegra210_audio_plls[] = {
static struct clk **clks;
static void tegra210_utmi_param_configure(void __iomem *clk_base)
{
u32 reg;
int i;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (osc_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected oscillator freq %lu\n", __func__,
osc_freq);
return;
}
reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0);
reg |= PLLU_HW_PWRDN_CFG0_IDDQ_PD_INCLUDE |
PLLU_HW_PWRDN_CFG0_USE_SWITCH_DETECT |
PLLU_HW_PWRDN_CFG0_USE_LOCKDET;
reg &= ~(PLLU_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL |
PLLU_HW_PWRDN_CFG0_CLK_SWITCH_SWCTL);
writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0);
reg = readl_relaxed(clk_base + PLLU_HW_PWRDN_CFG0);
reg |= PLLU_HW_PWRDN_CFG0_SEQ_ENABLE;
writel_relaxed(reg, clk_base + PLLU_HW_PWRDN_CFG0);
udelay(1);
reg = readl_relaxed(clk_base + PLLU_BASE);
reg &= ~PLLU_BASE_CLKENABLE_USB;
writel_relaxed(reg, clk_base + PLLU_BASE);
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg &= ~UTMIPLL_HW_PWRDN_CFG0_IDDQ_OVERRIDE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
udelay(10);
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
/* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(utmi_parameters[i].
active_delay_count);
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(utmi_parameters[i].
enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(utmi_parameters[i].
xtal_freq_count);
reg |= UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
/* Remove power downs from UTMIP PLL control bits */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg |= UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
udelay(1);
/* Enable samplers for SNPS, XUSB_HOST, XUSB_DEV */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERUP;
reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERUP;
reg |= UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERUP;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_D_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Setup HW control of UTMIPLL */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERUP;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_USE_LOCKDET;
reg &= ~UTMIPLL_HW_PWRDN_CFG0_CLK_ENABLE_SWCTL;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
udelay(1);
reg = readl_relaxed(clk_base + XUSB_PLL_CFG0);
reg &= ~XUSB_PLL_CFG0_UTMIPLL_LOCK_DLY;
writel_relaxed(reg, clk_base + XUSB_PLL_CFG0);
udelay(1);
/* Enable HW control UTMIPLL */
reg = readl_relaxed(clk_base + UTMIPLL_HW_PWRDN_CFG0);
reg |= UTMIPLL_HW_PWRDN_CFG0_SEQ_ENABLE;
writel_relaxed(reg, clk_base + UTMIPLL_HW_PWRDN_CFG0);
}
static __init void tegra210_periph_clk_init(void __iomem *clk_base,
void __iomem *pmc_base)
{
......@@ -2523,7 +2353,6 @@ static __init void tegra210_periph_clk_init(void __iomem *clk_base,
static void __init tegra210_pll_init(void __iomem *clk_base,
void __iomem *pmc)
{
u32 val;
struct clk *clk;
/* PLLC */
......@@ -2583,12 +2412,9 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
clks[TEGRA210_CLK_PLL_M_UD] = clk;
/* PLLU_VCO */
val = readl(clk_base + pll_u_vco_params.base_reg);
val &= ~PLLU_BASE_OVERRIDE; /* disable PLLU_OVERRIDE */
writel(val, clk_base + pll_u_vco_params.base_reg);
clk = tegra_clk_register_pllre("pll_u_vco", "pll_ref", clk_base, pmc,
0, &pll_u_vco_params, &pll_u_lock, pll_ref_freq);
clk = tegra_clk_register_pllu_tegra210("pll_u_vco", "pll_ref",
clk_base, 0, &pll_u_vco_params,
&pll_u_lock);
clk_register_clkdev(clk, "pll_u_vco", NULL);
clks[TEGRA210_CLK_PLL_U] = clk;
......@@ -2621,8 +2447,6 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
clk_register_clkdev(clk, "pll_u_out2", NULL);
clks[TEGRA210_CLK_PLL_U_OUT2] = clk;
tegra210_utmi_param_configure(clk_base);
/* PLLU_480M */
clk = clk_register_gate(NULL, "pll_u_480M", "pll_u_vco",
CLK_SET_RATE_PARENT, clk_base + PLLU_BASE,
......
drivers/clk/tegra/clk-tegra30.c
View file @ 15d68e8c
......@@ -118,20 +118,6 @@
#define AUDIO_SYNC_DOUBLER 0x49c
#define UTMIP_PLL_CFG2 0x488
#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
#define UTMIP_PLL_CFG1 0x484
#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN BIT(14)
#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN BIT(12)
#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN BIT(16)
/* Tegra CPU clock and reset control regs */
#define TEGRA_CLK_RST_CONTROLLER_CLK_CPU_CMPLX 0x4c
#define TEGRA_CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET 0x340
......@@ -207,46 +193,6 @@ static DEFINE_SPINLOCK(emc_lock);
static struct clk **clks;
/*
* Structure defining the fields for USB UTMI clocks Parameters.
*/
struct utmi_clk_param {
/* Oscillator Frequency in KHz */
u32 osc_frequency;
/* UTMIP PLL Enable Delay Count */
u8 enable_delay_count;
/* UTMIP PLL Stable count */
u8 stable_count;
/* UTMIP PLL Active delay count */
u8 active_delay_count;
/* UTMIP PLL Xtal frequency count */
u8 xtal_freq_count;
};
static const struct utmi_clk_param utmi_parameters[] = {
{
.osc_frequency = 13000000, .enable_delay_count = 0x02,
.stable_count = 0x33, .active_delay_count = 0x05,
.xtal_freq_count = 0x7f
}, {
.osc_frequency = 19200000, .enable_delay_count = 0x03,
.stable_count = 0x4b, .active_delay_count = 0x06,
.xtal_freq_count = 0xbb
}, {
.osc_frequency = 12000000, .enable_delay_count = 0x02,
.stable_count = 0x2f, .active_delay_count = 0x04,
.xtal_freq_count = 0x76
}, {
.osc_frequency = 26000000, .enable_delay_count = 0x04,
.stable_count = 0x66, .active_delay_count = 0x09,
.xtal_freq_count = 0xfe
}, {
.osc_frequency = 16800000, .enable_delay_count = 0x03,
.stable_count = 0x41, .active_delay_count = 0x0a,
.xtal_freq_count = 0xa4
},
};
static struct tegra_clk_pll_freq_table pll_c_freq_table[] = {
{ 12000000, 1040000000, 520, 6, 1, 8 },
{ 13000000, 1040000000, 480, 6, 1, 8 },
......@@ -873,59 +819,6 @@ static struct tegra_clk tegra30_clks[tegra_clk_max] __initdata = {
[tegra_clk_pll_a_out0] = { .dt_id = TEGRA30_CLK_PLL_A_OUT0, .present = true },
};
static void tegra30_utmi_param_configure(void)
{
unsigned int i;
u32 reg;
for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
if (input_freq == utmi_parameters[i].osc_frequency)
break;
}
if (i >= ARRAY_SIZE(utmi_parameters)) {
pr_err("%s: Unexpected input rate %lu\n", __func__, input_freq);
return;
}
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL stable and active counts */
reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
utmi_parameters[i].stable_count);
reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
utmi_parameters[i].active_delay_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG2);
/* Program UTMIP PLL delay and oscillator frequency counts */
reg = readl_relaxed(clk_base + UTMIP_PLL_CFG1);
reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
utmi_parameters[i].enable_delay_count);
reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
utmi_parameters[i].xtal_freq_count);
/* Remove power downs from UTMIP PLL control bits */
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
writel_relaxed(reg, clk_base + UTMIP_PLL_CFG1);
}
static const char *pll_e_parents[] = { "pll_ref", "pll_p" };
static void __init tegra30_pll_init(void)
......@@ -972,12 +865,10 @@ static void __init tegra30_pll_init(void)
clks[TEGRA30_CLK_PLL_X_OUT0] = clk;
/* PLLU */
clk = tegra_clk_register_pll("pll_u", "pll_ref", clk_base, pmc_base, 0,
&pll_u_params, NULL);
clk = tegra_clk_register_pllu("pll_u", "pll_ref", clk_base, 0,
&pll_u_params, NULL);
clks[TEGRA30_CLK_PLL_U] = clk;
tegra30_utmi_param_configure();
/* PLLD */
clk = tegra_clk_register_pll("pll_d", "pll_ref", clk_base, pmc_base, 0,
&pll_d_params, &pll_d_lock);
......
drivers/clk/tegra/clk.h
View file @ 15d68e8c
......@@ -427,6 +427,23 @@ struct clk *tegra_clk_register_pllmb(const char *name, const char *parent_name,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
struct clk *tegra_clk_register_pllu(const char *name, const char *parent_name,
void __iomem *clk_base, unsigned long flags,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
struct clk *tegra_clk_register_pllu_tegra114(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
struct clk *tegra_clk_register_pllu_tegra210(const char *name,
const char *parent_name,
void __iomem *clk_base, unsigned long flags,
struct tegra_clk_pll_params *pll_params,
spinlock_t *lock);
/**
* struct tegra_clk_pll_out - PLL divider down clock
*
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7