Commit 15ee95c3 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Add read accessor for AUX CTRL phy reg

This patch adds a read accessor for the aux ctrl register.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b0988c15
......@@ -949,6 +949,19 @@ static int tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
return err;
}
static int tg3_phy_auxctl_read(struct tg3 *tp, int reg, u32 *val)
{
int err;
err = tg3_writephy(tp, MII_TG3_AUX_CTRL,
(reg << MII_TG3_AUXCTL_MISC_RDSEL_SHIFT) |
MII_TG3_AUXCTL_SHDWSEL_MISC);
if (!err)
err = tg3_readphy(tp, MII_TG3_AUX_CTRL, val);
return err;
}
static int tg3_bmcr_reset(struct tg3 *tp)
{
u32 phy_control;
......@@ -1679,10 +1692,11 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
tg3_writephy(tp, MII_TG3_FET_TEST, ephy);
}
} else {
phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
MII_TG3_AUXCTL_SHDWSEL_MISC;
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
int ret;
ret = tg3_phy_auxctl_read(tp,
MII_TG3_AUXCTL_SHDWSEL_MISC, &phy);
if (!ret) {
if (enable)
phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
else
......@@ -1695,13 +1709,14 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
static void tg3_phy_set_wirespeed(struct tg3 *tp)
{
int ret;
u32 val;
if (tp->phy_flags & TG3_PHYFLG_NO_ETH_WIRE_SPEED)
return;
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x7007) &&
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
ret = tg3_phy_auxctl_read(tp, MII_TG3_AUXCTL_SHDWSEL_MISC, &val);
if (!ret)
tg3_writephy(tp, MII_TG3_AUX_CTRL,
(val | (1 << 15) | (1 << 4)));
}
......@@ -2092,8 +2107,9 @@ static int tg3_phy_reset(struct tg3 *tp)
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4c20);
} else if (tp->tg3_flags & TG3_FLAG_JUMBO_CAPABLE) {
/* Set bit 14 with read-modify-write to preserve other bits */
if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0007) &&
!tg3_readphy(tp, MII_TG3_AUX_CTRL, &val))
err = tg3_phy_auxctl_read(tp,
MII_TG3_AUXCTL_SHDWSEL_AUXCTL, &val);
if (!err)
tg3_writephy(tp, MII_TG3_AUX_CTRL, val | 0x4000);
}
......@@ -3263,9 +3279,10 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
current_duplex = DUPLEX_INVALID;
if (tp->phy_flags & TG3_PHYFLG_CAPACITIVE_COUPLING) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x4007);
tg3_readphy(tp, MII_TG3_AUX_CTRL, &val);
if (!(val & (1 << 10))) {
err = tg3_phy_auxctl_read(tp,
MII_TG3_AUXCTL_SHDWSEL_MISCTEST,
&val);
if (!err && !(val & (1 << 10))) {
val |= (1 << 10);
tg3_writephy(tp, MII_TG3_AUX_CTRL, val);
goto relink;
......
......@@ -2194,19 +2194,22 @@
#define MII_TG3_AUX_CTRL 0x18 /* auxiliary control register */
#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL 0x0002
#define MII_TG3_AUXCTL_PCTL_100TX_LPWR 0x0010
#define MII_TG3_AUXCTL_PCTL_SPR_ISOLATE 0x0020
#define MII_TG3_AUXCTL_PCTL_VREG_11V 0x0180
#define MII_TG3_AUXCTL_SHDWSEL_PWRCTL 0x0002
#define MII_TG3_AUXCTL_MISC_WREN 0x8000
#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_TG3_AUXCTL_MISC_RDSEL_MISC 0x7000
#define MII_TG3_AUXCTL_SHDWSEL_MISCTEST 0x0004
#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_TG3_AUXCTL_MISC_RDSEL_SHIFT 12
#define MII_TG3_AUXCTL_MISC_WREN 0x8000
#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
#define MII_TG3_AUX_STAT 0x19 /* auxiliary status register */
#define MII_TG3_AUX_STAT_LPASS 0x0004
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment