Commit 1653a179 authored by Evan Quan's avatar Evan Quan Committed by Alex Deucher

drm/amd/pm: move NAVI1X power mode switching workaround to post_init

Since that should be the correct place to put ASIC specific
workarounds.
Signed-off-by: default avatarEvan Quan <evan.quan@amd.com>
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 236b156f
...@@ -1013,20 +1013,6 @@ static int smu_smc_hw_setup(struct smu_context *smu) ...@@ -1013,20 +1013,6 @@ static int smu_smc_hw_setup(struct smu_context *smu)
return ret; return ret;
} }
if (!smu->dc_controlled_by_gpio) {
/*
* For Navi1X, manually switch it to AC mode as PMFW
* may boot it with DC mode.
*/
ret = smu_set_power_source(smu,
adev->pm.ac_power ? SMU_POWER_SOURCE_AC :
SMU_POWER_SOURCE_DC);
if (ret) {
dev_err(adev->dev, "Failed to switch to %s mode!\n", adev->pm.ac_power ? "AC" : "DC");
return ret;
}
}
ret = smu_notify_display_change(smu); ret = smu_notify_display_change(smu);
if (ret) if (ret)
return ret; return ret;
......
...@@ -2661,8 +2661,26 @@ static int navi10_post_smu_init(struct smu_context *smu) ...@@ -2661,8 +2661,26 @@ static int navi10_post_smu_init(struct smu_context *smu)
} }
ret = navi10_run_umc_cdr_workaround(smu); ret = navi10_run_umc_cdr_workaround(smu);
if (ret) if (ret) {
dev_err(adev->dev, "Failed to apply umc cdr workaround!\n"); dev_err(adev->dev, "Failed to apply umc cdr workaround!\n");
return ret;
}
if (!smu->dc_controlled_by_gpio) {
/*
* For Navi1X, manually switch it to AC mode as PMFW
* may boot it with DC mode.
*/
ret = smu_v11_0_set_power_source(smu,
adev->pm.ac_power ?
SMU_POWER_SOURCE_AC :
SMU_POWER_SOURCE_DC);
if (ret) {
dev_err(adev->dev, "Failed to switch to %s mode!\n",
adev->pm.ac_power ? "AC" : "DC");
return ret;
}
}
return ret; return ret;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment