Commit 165bc513 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k update from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove inline strlen() implementation
  m68k/atari: USB - add platform devices for EtherNAT/NetUSBee ISP1160 HCD
  m68k: Implement ndelay() based on the existing udelay() logic
  m68k/atari: EtherNAT - add interrupt chip definition for CPLD interrupts
  m68k/atari: EtherNEC - add platform device support
  m68k/atari: EtherNAT - platform device and IRQ support code
  m68k/atari: use dedicated irq_chip for timer D interrupts
  m68k/atari: ROM port ISA adapter support
  m68k: Add missing cmpxchg64() if CONFIG_RMW_INSNS=y
parents e2823299 e00c73ee
...@@ -45,6 +45,16 @@ config ISA ...@@ -45,6 +45,16 @@ config ISA
(MCA) or VESA. ISA is an older system, now being displaced by PCI; (MCA) or VESA. ISA is an older system, now being displaced by PCI;
newer boards don't support it. If you have ISA, say Y, otherwise N. newer boards don't support it. If you have ISA, say Y, otherwise N.
config ATARI_ROM_ISA
bool "Atari ROM port ISA adapter support"
depends on ATARI
help
This option enables support for the ROM port ISA adapter used to
operate ISA cards on Atari. Only 8 bit cards are supported, and
no interrupt lines are connected.
The only driver currently using this adapter is the EtherNEC
driver for RTL8019AS based NE2000 compatible network cards.
config GENERIC_ISA_DMA config GENERIC_ISA_DMA
def_bool ISA def_bool ISA
......
...@@ -55,6 +55,30 @@ config NFETH ...@@ -55,6 +55,30 @@ config NFETH
which will emulate a regular ethernet device while presenting an which will emulate a regular ethernet device while presenting an
ethertap device to the host system. ethertap device to the host system.
config ATARI_ETHERNAT
bool "Atari EtherNAT Ethernet support"
depends on ATARI
---help---
Say Y to include support for the EtherNAT network adapter for the
CT/60 extension port.
To compile the actual ethernet driver, choose Y or M for the SMC91X
option in the network device section; the module will be called smc91x.
config ATARI_ETHERNEC
bool "Atari EtherNEC Ethernet support"
depends on ATARI_ROM_ISA
---help---
Say Y to include support for the EtherNEC network adapter for the
ROM port. The driver works by polling instead of interrupts, so it
is quite slow.
This driver also suppports the ethernet part of the NetUSBee ROM
port combined Ethernet/USB adapter.
To compile the actual ethernet driver, choose Y or M in for the NE2000
option in the network device section; the module will be called ne.
endmenu endmenu
menu "Character devices" menu "Character devices"
......
...@@ -49,6 +49,7 @@ ...@@ -49,6 +49,7 @@
#include <asm/atari_stdma.h> #include <asm/atari_stdma.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/entry.h> #include <asm/entry.h>
#include <asm/io.h>
/* /*
...@@ -121,6 +122,136 @@ static struct irq_chip atari_irq_chip = { ...@@ -121,6 +122,136 @@ static struct irq_chip atari_irq_chip = {
.irq_disable = atari_irq_disable, .irq_disable = atari_irq_disable,
}; };
/*
* ST-MFP timer D chained interrupts - each driver gets its own timer
* interrupt instance.
*/
struct mfptimerbase {
volatile struct MFP *mfp;
unsigned char mfp_mask, mfp_data;
unsigned short int_mask;
int handler_irq, mfptimer_irq, server_irq;
char *name;
} stmfp_base = {
.mfp = &st_mfp,
.int_mask = 0x0,
.handler_irq = IRQ_MFP_TIMD,
.mfptimer_irq = IRQ_MFP_TIMER1,
.name = "MFP Timer D"
};
static irqreturn_t mfptimer_handler(int irq, void *dev_id)
{
struct mfptimerbase *base = dev_id;
int mach_irq;
unsigned char ints;
mach_irq = base->mfptimer_irq;
ints = base->int_mask;
for (; ints; mach_irq++, ints >>= 1) {
if (ints & 1)
generic_handle_irq(mach_irq);
}
return IRQ_HANDLED;
}
static void atari_mfptimer_enable(struct irq_data *data)
{
int mfp_num = data->irq - IRQ_MFP_TIMER1;
stmfp_base.int_mask |= 1 << mfp_num;
atari_enable_irq(IRQ_MFP_TIMD);
}
static void atari_mfptimer_disable(struct irq_data *data)
{
int mfp_num = data->irq - IRQ_MFP_TIMER1;
stmfp_base.int_mask &= ~(1 << mfp_num);
if (!stmfp_base.int_mask)
atari_disable_irq(IRQ_MFP_TIMD);
}
static struct irq_chip atari_mfptimer_chip = {
.name = "timer_d",
.irq_enable = atari_mfptimer_enable,
.irq_disable = atari_mfptimer_disable,
};
/*
* EtherNAT CPLD interrupt handling
* CPLD interrupt register is at phys. 0x80000023
* Need this mapped in at interrupt startup time
* Possibly need this mapped on demand anyway -
* EtherNAT USB driver needs to disable IRQ before
* startup!
*/
static unsigned char *enat_cpld;
static unsigned int atari_ethernat_startup(struct irq_data *data)
{
int enat_num = 140 - data->irq + 1;
m68k_irq_startup(data);
/*
* map CPLD interrupt register
*/
if (!enat_cpld)
enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
/*
* do _not_ enable the USB chip interrupt here - causes interrupt storm
* and triggers dead interrupt watchdog
* Need to reset the USB chip to a sane state in early startup before
* removing this hack
*/
if (enat_num == 1)
*enat_cpld |= 1 << enat_num;
return 0;
}
static void atari_ethernat_enable(struct irq_data *data)
{
int enat_num = 140 - data->irq + 1;
/*
* map CPLD interrupt register
*/
if (!enat_cpld)
enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
*enat_cpld |= 1 << enat_num;
}
static void atari_ethernat_disable(struct irq_data *data)
{
int enat_num = 140 - data->irq + 1;
/*
* map CPLD interrupt register
*/
if (!enat_cpld)
enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
*enat_cpld &= ~(1 << enat_num);
}
static void atari_ethernat_shutdown(struct irq_data *data)
{
int enat_num = 140 - data->irq + 1;
if (enat_cpld) {
*enat_cpld &= ~(1 << enat_num);
iounmap(enat_cpld);
enat_cpld = NULL;
}
}
static struct irq_chip atari_ethernat_chip = {
.name = "ethernat",
.irq_startup = atari_ethernat_startup,
.irq_shutdown = atari_ethernat_shutdown,
.irq_enable = atari_ethernat_enable,
.irq_disable = atari_ethernat_disable,
};
/* /*
* void atari_init_IRQ (void) * void atari_init_IRQ (void)
* *
...@@ -198,6 +329,27 @@ void __init atari_init_IRQ(void) ...@@ -198,6 +329,27 @@ void __init atari_init_IRQ(void)
/* Initialize the PSG: all sounds off, both ports output */ /* Initialize the PSG: all sounds off, both ports output */
sound_ym.rd_data_reg_sel = 7; sound_ym.rd_data_reg_sel = 7;
sound_ym.wd_data = 0xff; sound_ym.wd_data = 0xff;
m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq,
IRQ_MFP_TIMER1, 8);
/* prepare timer D data for use as poll interrupt */
/* set Timer D data Register - needs to be > 0 */
st_mfp.tim_dt_d = 254; /* < 100 Hz */
/* start timer D, div = 1:100 */
st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6;
/* request timer D dispatch handler */
if (request_irq(IRQ_MFP_TIMD, mfptimer_handler, IRQF_SHARED,
stmfp_base.name, &stmfp_base))
pr_err("Couldn't register %s interrupt\n", stmfp_base.name);
/*
* EtherNAT ethernet / USB interrupt handlers
*/
m68k_setup_irq_controller(&atari_ethernat_chip, handle_simple_irq,
139, 2);
} }
......
...@@ -31,6 +31,8 @@ ...@@ -31,6 +31,8 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/usb/isp116x.h>
#include <linux/vt_kern.h> #include <linux/vt_kern.h>
#include <linux/module.h> #include <linux/module.h>
...@@ -655,3 +657,240 @@ static void atari_get_hardware_list(struct seq_file *m) ...@@ -655,3 +657,240 @@ static void atari_get_hardware_list(struct seq_file *m)
ATARIHW_ANNOUNCE(VME, "VME Bus"); ATARIHW_ANNOUNCE(VME, "VME Bus");
ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor"); ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
} }
/*
* MSch: initial platform device support for Atari,
* required for EtherNAT/EtherNEC/NetUSBee drivers
*/
#if defined(CONFIG_ATARI_ETHERNAT) || defined(CONFIG_ATARI_ETHERNEC)
static void isp1160_delay(struct device *dev, int delay)
{
ndelay(delay);
}
#endif
#ifdef CONFIG_ATARI_ETHERNAT
/*
* EtherNAT: SMC91C111 Ethernet chipset, handled by smc91x driver
*/
#define ATARI_ETHERNAT_IRQ 140
static struct resource smc91x_resources[] = {
[0] = {
.name = "smc91x-regs",
.start = ATARI_ETHERNAT_PHYS_ADDR,
.end = ATARI_ETHERNAT_PHYS_ADDR + 0xfffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "smc91x-irq",
.start = ATARI_ETHERNAT_IRQ,
.end = ATARI_ETHERNAT_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
/*
* ISP 1160 - using the isp116x-hcd module
*/
#define ATARI_USB_PHYS_ADDR 0x80000012
#define ATARI_USB_IRQ 139
static struct resource isp1160_resources[] = {
[0] = {
.name = "isp1160-data",
.start = ATARI_USB_PHYS_ADDR,
.end = ATARI_USB_PHYS_ADDR + 0x1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "isp1160-regs",
.start = ATARI_USB_PHYS_ADDR + 0x4,
.end = ATARI_USB_PHYS_ADDR + 0x5,
.flags = IORESOURCE_MEM,
},
[2] = {
.name = "isp1160-irq",
.start = ATARI_USB_IRQ,
.end = ATARI_USB_IRQ,
.flags = IORESOURCE_IRQ,
},
};
/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
static struct isp116x_platform_data isp1160_platform_data = {
/* Enable internal resistors on downstream ports */
.sel15Kres = 1,
/* On-chip overcurrent protection */
.oc_enable = 1,
/* INT output polarity */
.int_act_high = 1,
/* INT edge or level triggered */
.int_edge_triggered = 0,
/* WAKEUP pin connected - NOT SUPPORTED */
/* .remote_wakeup_connected = 0, */
/* Wakeup by devices on usb bus enabled */
.remote_wakeup_enable = 0,
.delay = isp1160_delay,
};
static struct platform_device isp1160_device = {
.name = "isp116x-hcd",
.id = 0,
.num_resources = ARRAY_SIZE(isp1160_resources),
.resource = isp1160_resources,
.dev = {
.platform_data = &isp1160_platform_data,
},
};
static struct platform_device *atari_ethernat_devices[] __initdata = {
&smc91x_device,
&isp1160_device
};
#endif /* CONFIG_ATARI_ETHERNAT */
#ifdef CONFIG_ATARI_ETHERNEC
/*
* EtherNEC: RTL8019 (NE2000 compatible) Ethernet chipset,
* handled by ne.c driver
*/
#define ATARI_ETHERNEC_PHYS_ADDR 0xfffa0000
#define ATARI_ETHERNEC_BASE 0x300
#define ATARI_ETHERNEC_IRQ IRQ_MFP_TIMER1
static struct resource rtl8019_resources[] = {
[0] = {
.name = "rtl8019-regs",
.start = ATARI_ETHERNEC_BASE,
.end = ATARI_ETHERNEC_BASE + 0x20 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
.name = "rtl8019-irq",
.start = ATARI_ETHERNEC_IRQ,
.end = ATARI_ETHERNEC_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtl8019_device = {
.name = "ne",
.id = -1,
.num_resources = ARRAY_SIZE(rtl8019_resources),
.resource = rtl8019_resources,
};
/*
* NetUSBee: ISP1160 USB host adapter via ROM-port adapter
*/
#define ATARI_NETUSBEE_PHYS_ADDR 0xfffa8000
#define ATARI_NETUSBEE_BASE 0x340
#define ATARI_NETUSBEE_IRQ IRQ_MFP_TIMER2
static struct resource netusbee_resources[] = {
[0] = {
.name = "isp1160-data",
.start = ATARI_NETUSBEE_BASE,
.end = ATARI_NETUSBEE_BASE + 0x1,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "isp1160-regs",
.start = ATARI_NETUSBEE_BASE + 0x20,
.end = ATARI_NETUSBEE_BASE + 0x21,
.flags = IORESOURCE_MEM,
},
[2] = {
.name = "isp1160-irq",
.start = ATARI_NETUSBEE_IRQ,
.end = ATARI_NETUSBEE_IRQ,
.flags = IORESOURCE_IRQ,
},
};
/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
static struct isp116x_platform_data netusbee_platform_data = {
/* Enable internal resistors on downstream ports */
.sel15Kres = 1,
/* On-chip overcurrent protection */
.oc_enable = 1,
/* INT output polarity */
.int_act_high = 1,
/* INT edge or level triggered */
.int_edge_triggered = 0,
/* WAKEUP pin connected - NOT SUPPORTED */
/* .remote_wakeup_connected = 0, */
/* Wakeup by devices on usb bus enabled */
.remote_wakeup_enable = 0,
.delay = isp1160_delay,
};
static struct platform_device netusbee_device = {
.name = "isp116x-hcd",
.id = 1,
.num_resources = ARRAY_SIZE(netusbee_resources),
.resource = netusbee_resources,
.dev = {
.platform_data = &netusbee_platform_data,
},
};
static struct platform_device *atari_netusbee_devices[] __initdata = {
&rtl8019_device,
&netusbee_device
};
#endif /* CONFIG_ATARI_ETHERNEC */
int __init atari_platform_init(void)
{
int rv = 0;
if (!MACH_IS_ATARI)
return -ENODEV;
#ifdef CONFIG_ATARI_ETHERNAT
{
unsigned char *enatc_virt;
enatc_virt = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0xf);
if (hwreg_present(enatc_virt)) {
rv = platform_add_devices(atari_ethernat_devices,
ARRAY_SIZE(atari_ethernat_devices));
}
iounmap(enatc_virt);
}
#endif
#ifdef CONFIG_ATARI_ETHERNEC
{
int error;
unsigned char *enec_virt;
enec_virt = (unsigned char *)ioremap((ATARI_ETHERNEC_PHYS_ADDR), 0xf);
if (hwreg_present(enec_virt)) {
error = platform_add_devices(atari_netusbee_devices,
ARRAY_SIZE(atari_netusbee_devices));
if (error && !rv)
rv = error;
}
iounmap(enec_virt);
}
#endif
return rv;
}
arch_initcall(atari_platform_init);
...@@ -805,5 +805,11 @@ struct MSTE_RTC { ...@@ -805,5 +805,11 @@ struct MSTE_RTC {
#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS)) #define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
/*
** EtherNAT add-on card for Falcon - combined ethernet and USB adapter
*/
#define ATARI_ETHERNAT_PHYS_ADDR 0x80000000
#endif /* linux/atarihw.h */ #endif /* linux/atarihw.h */
...@@ -32,7 +32,7 @@ ...@@ -32,7 +32,7 @@
#define VME_SOURCE_BASE 56 #define VME_SOURCE_BASE 56
#define VME_MAX_SOURCES 16 #define VME_MAX_SOURCES 16
#define NUM_ATARI_SOURCES (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE) #define NUM_ATARI_SOURCES 141
/* convert vector number to int source number */ /* convert vector number to int source number */
#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8))) #define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
...@@ -94,6 +94,15 @@ ...@@ -94,6 +94,15 @@
#define IRQ_SCCA_RX (52) #define IRQ_SCCA_RX (52)
#define IRQ_SCCA_SPCOND (54) #define IRQ_SCCA_SPCOND (54)
/* shared MFP timer D interrupts - hires timer for EtherNEC et al. */
#define IRQ_MFP_TIMER1 (64)
#define IRQ_MFP_TIMER2 (65)
#define IRQ_MFP_TIMER3 (66)
#define IRQ_MFP_TIMER4 (67)
#define IRQ_MFP_TIMER5 (68)
#define IRQ_MFP_TIMER6 (69)
#define IRQ_MFP_TIMER7 (70)
#define IRQ_MFP_TIMER8 (71)
#define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */ #define INT_CLK 24576 /* CLK while int_clk =2.456MHz and divide = 100 */
#define INT_TICKS 246 /* to make sched_time = 99.902... HZ */ #define INT_TICKS 246 /* to make sched_time = 99.902... HZ */
......
...@@ -124,6 +124,9 @@ static inline unsigned long __cmpxchg(volatile void *p, unsigned long old, ...@@ -124,6 +124,9 @@ static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
#define cmpxchg_local(ptr, o, n) \ #define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
(unsigned long)(n), sizeof(*(ptr)))) (unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
#else #else
/* /*
......
...@@ -92,5 +92,28 @@ static inline void __udelay(unsigned long usecs) ...@@ -92,5 +92,28 @@ static inline void __udelay(unsigned long usecs)
#define udelay(n) (__builtin_constant_p(n) ? \ #define udelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_udelay() : __const_udelay(n)) : __udelay(n)) ((n) > 20000 ? __bad_udelay() : __const_udelay(n)) : __udelay(n))
/*
* nanosecond delay:
*
* ((((HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6) is the number of loops
* per microsecond
*
* 1000 / ((((HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6) is the number of
* nanoseconds per loop
*
* So n / ( 1000 / ((((HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6) ) would
* be the number of loops for n nanoseconds
*/
/*
* The simpler m68k and ColdFire processors do not have a 32*32->64
* multiply instruction. So we need to handle them a little differently.
* We use a bit of shifting and a single 32*32->32 multiply to get close.
* This is a macro so that the const version can factor out the first
* multiply and shift.
*/
#define HZSCALE (268435456 / (1000000 / HZ))
#define ndelay(n) __delay(DIV_ROUND_UP((n) * ((((HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6), 1000));
#endif /* defined(_M68K_DELAY_H) */ #endif /* defined(_M68K_DELAY_H) */
...@@ -63,6 +63,23 @@ ...@@ -63,6 +63,23 @@
#endif #endif
#endif /* AMIGA_PCMCIA */ #endif /* AMIGA_PCMCIA */
#ifdef CONFIG_ATARI_ROM_ISA
#define enec_isa_read_base 0xfffa0000
#define enec_isa_write_base 0xfffb0000
#define ENEC_ISA_IO_B(ioaddr) (enec_isa_read_base+((((unsigned long)(ioaddr))&0x7F)<<9))
#define ENEC_ISA_IO_W(ioaddr) (enec_isa_read_base+((((unsigned long)(ioaddr))&0x7F)<<9))
#define ENEC_ISA_MEM_B(madr) (enec_isa_read_base+((((unsigned long)(madr))&0x7F)<<9))
#define ENEC_ISA_MEM_W(madr) (enec_isa_read_base+((((unsigned long)(madr))&0x7F)<<9))
#ifndef MULTI_ISA
#define MULTI_ISA 0
#else
#undef MULTI_ISA
#define MULTI_ISA 1
#endif
#endif /* ATARI_ROM_ISA */
#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE) #if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE)
...@@ -111,14 +128,15 @@ void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len); ...@@ -111,14 +128,15 @@ void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len);
#define readw(addr) in_le16(addr) #define readw(addr) in_le16(addr)
#define writew(v, addr) out_le16((addr), (v)) #define writew(v, addr) out_le16((addr), (v))
#elif defined(CONFIG_ISA) #elif defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA)
#if MULTI_ISA == 0 #if MULTI_ISA == 0
#undef MULTI_ISA #undef MULTI_ISA
#endif #endif
#define ISA_TYPE_Q40 (1) #define ISA_TYPE_Q40 (1)
#define ISA_TYPE_AG (2) #define ISA_TYPE_AG (2)
#define ISA_TYPE_ENEC (3)
#if defined(CONFIG_Q40) && !defined(MULTI_ISA) #if defined(CONFIG_Q40) && !defined(MULTI_ISA)
#define ISA_TYPE ISA_TYPE_Q40 #define ISA_TYPE ISA_TYPE_Q40
...@@ -128,6 +146,10 @@ void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len); ...@@ -128,6 +146,10 @@ void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len);
#define ISA_TYPE ISA_TYPE_AG #define ISA_TYPE ISA_TYPE_AG
#define ISA_SEX 1 #define ISA_SEX 1
#endif #endif
#if defined(CONFIG_ATARI_ROM_ISA) && !defined(MULTI_ISA)
#define ISA_TYPE ISA_TYPE_ENEC
#define ISA_SEX 0
#endif
#ifdef MULTI_ISA #ifdef MULTI_ISA
extern int isa_type; extern int isa_type;
...@@ -151,6 +173,9 @@ static inline u8 __iomem *isa_itb(unsigned long addr) ...@@ -151,6 +173,9 @@ static inline u8 __iomem *isa_itb(unsigned long addr)
#endif #endif
#ifdef CONFIG_AMIGA_PCMCIA #ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr); case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
#endif
#ifdef CONFIG_ATARI_ROM_ISA
case ISA_TYPE_ENEC: return (u8 __iomem *)ENEC_ISA_IO_B(addr);
#endif #endif
default: return NULL; /* avoid warnings, just in case */ default: return NULL; /* avoid warnings, just in case */
} }
...@@ -164,6 +189,9 @@ static inline u16 __iomem *isa_itw(unsigned long addr) ...@@ -164,6 +189,9 @@ static inline u16 __iomem *isa_itw(unsigned long addr)
#endif #endif
#ifdef CONFIG_AMIGA_PCMCIA #ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr); case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
#endif
#ifdef CONFIG_ATARI_ROM_ISA
case ISA_TYPE_ENEC: return (u16 __iomem *)ENEC_ISA_IO_W(addr);
#endif #endif
default: return NULL; /* avoid warnings, just in case */ default: return NULL; /* avoid warnings, just in case */
} }
...@@ -187,6 +215,9 @@ static inline u8 __iomem *isa_mtb(unsigned long addr) ...@@ -187,6 +215,9 @@ static inline u8 __iomem *isa_mtb(unsigned long addr)
#endif #endif
#ifdef CONFIG_AMIGA_PCMCIA #ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u8 __iomem *)addr; case ISA_TYPE_AG: return (u8 __iomem *)addr;
#endif
#ifdef CONFIG_ATARI_ROM_ISA
case ISA_TYPE_ENEC: return (u8 __iomem *)ENEC_ISA_MEM_B(addr);
#endif #endif
default: return NULL; /* avoid warnings, just in case */ default: return NULL; /* avoid warnings, just in case */
} }
...@@ -200,6 +231,9 @@ static inline u16 __iomem *isa_mtw(unsigned long addr) ...@@ -200,6 +231,9 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
#endif #endif
#ifdef CONFIG_AMIGA_PCMCIA #ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: return (u16 __iomem *)addr; case ISA_TYPE_AG: return (u16 __iomem *)addr;
#endif
#ifdef CONFIG_ATARI_ROM_ISA
case ISA_TYPE_ENEC: return (u16 __iomem *)ENEC_ISA_MEM_W(addr);
#endif #endif
default: return NULL; /* avoid warnings, just in case */ default: return NULL; /* avoid warnings, just in case */
} }
...@@ -222,6 +256,36 @@ static inline u16 __iomem *isa_mtw(unsigned long addr) ...@@ -222,6 +256,36 @@ static inline u16 __iomem *isa_mtw(unsigned long addr)
(ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \ (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val)) \
: out_le16(isa_mtw((unsigned long)(p)),(val))) : out_le16(isa_mtw((unsigned long)(p)),(val)))
#ifdef CONFIG_ATARI_ROM_ISA
#define isa_rom_inb(port) rom_in_8(isa_itb(port))
#define isa_rom_inw(port) \
(ISA_SEX ? rom_in_be16(isa_itw(port)) \
: rom_in_le16(isa_itw(port)))
#define isa_rom_outb(val, port) rom_out_8(isa_itb(port), (val))
#define isa_rom_outw(val, port) \
(ISA_SEX ? rom_out_be16(isa_itw(port), (val)) \
: rom_out_le16(isa_itw(port), (val)))
#define isa_rom_readb(p) rom_in_8(isa_mtb((unsigned long)(p)))
#define isa_rom_readw(p) \
(ISA_SEX ? rom_in_be16(isa_mtw((unsigned long)(p))) \
: rom_in_le16(isa_mtw((unsigned long)(p))))
#define isa_rom_readw_swap(p) \
(ISA_SEX ? rom_in_le16(isa_mtw((unsigned long)(p))) \
: rom_in_be16(isa_mtw((unsigned long)(p))))
#define isa_rom_readw_raw(p) rom_in_be16(isa_mtw((unsigned long)(p)))
#define isa_rom_writeb(val, p) rom_out_8(isa_mtb((unsigned long)(p)), (val))
#define isa_rom_writew(val, p) \
(ISA_SEX ? rom_out_be16(isa_mtw((unsigned long)(p)), (val)) \
: rom_out_le16(isa_mtw((unsigned long)(p)), (val)))
#define isa_rom_writew_swap(val, p) \
(ISA_SEX ? rom_out_le16(isa_mtw((unsigned long)(p)), (val)) \
: rom_out_be16(isa_mtw((unsigned long)(p)), (val)))
#define isa_rom_writew_raw(val, p) rom_out_be16(isa_mtw((unsigned long)(p)), (val))
#endif /* CONFIG_ATARI_ROM_ISA */
static inline void isa_delay(void) static inline void isa_delay(void)
{ {
switch(ISA_TYPE) switch(ISA_TYPE)
...@@ -231,6 +295,9 @@ static inline void isa_delay(void) ...@@ -231,6 +295,9 @@ static inline void isa_delay(void)
#endif #endif
#ifdef CONFIG_AMIGA_PCMCIA #ifdef CONFIG_AMIGA_PCMCIA
case ISA_TYPE_AG: break; case ISA_TYPE_AG: break;
#endif
#ifdef CONFIG_ATARI_ROM_ISA
case ISA_TYPE_ENEC: break;
#endif #endif
default: break; /* avoid warnings */ default: break; /* avoid warnings */
} }
...@@ -263,6 +330,29 @@ static inline void isa_delay(void) ...@@ -263,6 +330,29 @@ static inline void isa_delay(void)
raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1)) raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
#ifdef CONFIG_ATARI_ROM_ISA
#define isa_rom_inb_p(p) ({ u8 _v = isa_rom_inb(p); isa_delay(); _v; })
#define isa_rom_inw_p(p) ({ u16 _v = isa_rom_inw(p); isa_delay(); _v; })
#define isa_rom_outb_p(v, p) ({ isa_rom_outb((v), (p)); isa_delay(); })
#define isa_rom_outw_p(v, p) ({ isa_rom_outw((v), (p)); isa_delay(); })
#define isa_rom_insb(port, buf, nr) raw_rom_insb(isa_itb(port), (u8 *)(buf), (nr))
#define isa_rom_insw(port, buf, nr) \
(ISA_SEX ? raw_rom_insw(isa_itw(port), (u16 *)(buf), (nr)) : \
raw_rom_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
#define isa_rom_outsb(port, buf, nr) raw_rom_outsb(isa_itb(port), (u8 *)(buf), (nr))
#define isa_rom_outsw(port, buf, nr) \
(ISA_SEX ? raw_rom_outsw(isa_itw(port), (u16 *)(buf), (nr)) : \
raw_rom_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
#endif /* CONFIG_ATARI_ROM_ISA */
#endif /* CONFIG_ISA || CONFIG_ATARI_ROM_ISA */
#if defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
#define inb isa_inb #define inb isa_inb
#define inb_p isa_inb_p #define inb_p isa_inb_p
#define outb isa_outb #define outb isa_outb
...@@ -285,9 +375,43 @@ static inline void isa_delay(void) ...@@ -285,9 +375,43 @@ static inline void isa_delay(void)
#define readw isa_readw #define readw isa_readw
#define writeb isa_writeb #define writeb isa_writeb
#define writew isa_writew #define writew isa_writew
#endif /* CONFIG_ISA && !CONFIG_ATARI_ROM_ISA */
#else /* CONFIG_ISA */ #ifdef CONFIG_ATARI_ROM_ISA
/*
* kernel with both ROM port ISA and IDE compiled in, those have
* conflicting defs for in/out. Simply consider port < 1024
* ROM port ISA and everything else regular ISA for IDE. read,write defined
* below.
*/
#define inb(port) ((port) < 1024 ? isa_rom_inb(port) : in_8(port))
#define inb_p(port) ((port) < 1024 ? isa_rom_inb_p(port) : in_8(port))
#define inw(port) ((port) < 1024 ? isa_rom_inw(port) : in_le16(port))
#define inw_p(port) ((port) < 1024 ? isa_rom_inw_p(port) : in_le16(port))
#define inl isa_inl
#define inl_p isa_inl_p
#define outb(val, port) ((port) < 1024 ? isa_rom_outb((val), (port)) : out_8((port), (val)))
#define outb_p(val, port) ((port) < 1024 ? isa_rom_outb_p((val), (port)) : out_8((port), (val)))
#define outw(val, port) ((port) < 1024 ? isa_rom_outw((val), (port)) : out_le16((port), (val)))
#define outw_p(val, port) ((port) < 1024 ? isa_rom_outw_p((val), (port)) : out_le16((port), (val)))
#define outl isa_outl
#define outl_p isa_outl_p
#define insb(port, buf, nr) ((port) < 1024 ? isa_rom_insb((port), (buf), (nr)) : isa_insb((port), (buf), (nr)))
#define insw(port, buf, nr) ((port) < 1024 ? isa_rom_insw((port), (buf), (nr)) : isa_insw((port), (buf), (nr)))
#define insl isa_insl
#define outsb(port, buf, nr) ((port) < 1024 ? isa_rom_outsb((port), (buf), (nr)) : isa_outsb((port), (buf), (nr)))
#define outsw(port, buf, nr) ((port) < 1024 ? isa_rom_outsw((port), (buf), (nr)) : isa_outsw((port), (buf), (nr)))
#define outsl isa_outsl
#define readb(addr) in_8(addr)
#define writeb(val, addr) out_8((addr), (val))
#define readw(addr) in_le16(addr)
#define writew(val, addr) out_le16((addr), (val))
#endif /* CONFIG_ATARI_ROM_ISA */
#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
/* /*
* We need to define dummy functions for GENERIC_IOMAP support. * We need to define dummy functions for GENERIC_IOMAP support.
*/ */
...@@ -319,7 +443,7 @@ static inline void isa_delay(void) ...@@ -319,7 +443,7 @@ static inline void isa_delay(void)
#define readw(addr) in_le16(addr) #define readw(addr) in_le16(addr)
#define writew(val,addr) out_le16((addr),(val)) #define writew(val,addr) out_le16((addr),(val))
#endif /* CONFIG_ISA */ #endif /* !CONFIG_ISA && !CONFIG_ATARI_ROM_ISA */
#define readl(addr) in_le32(addr) #define readl(addr) in_le32(addr)
#define writel(val,addr) out_le32((addr),(val)) #define writel(val,addr) out_le32((addr),(val))
......
...@@ -6,12 +6,16 @@ ...@@ -6,12 +6,16 @@
* different m68k hosts compiled into the kernel. * different m68k hosts compiled into the kernel.
* Currently the Atari has 72 and the Amiga 24, but if both are * Currently the Atari has 72 and the Amiga 24, but if both are
* supported in the kernel it is better to make room for 72. * supported in the kernel it is better to make room for 72.
* With EtherNAT add-on card on Atari, the highest interrupt
* number is 140 so NR_IRQS needs to be 141.
*/ */
#if defined(CONFIG_COLDFIRE) #if defined(CONFIG_COLDFIRE)
#define NR_IRQS 256 #define NR_IRQS 256
#elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X) #elif defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
#define NR_IRQS 200 #define NR_IRQS 200
#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) #elif defined(CONFIG_ATARI)
#define NR_IRQS 141
#elif defined(CONFIG_MAC)
#define NR_IRQS 72 #define NR_IRQS 72
#elif defined(CONFIG_Q40) #elif defined(CONFIG_Q40)
#define NR_IRQS 43 #define NR_IRQS 43
......
...@@ -10,7 +10,7 @@ ...@@ -10,7 +10,7 @@
#ifdef __KERNEL__ #ifdef __KERNEL__
#include <asm/types.h> #include <asm/byteorder.h>
/* Values for nocacheflag and cmode */ /* Values for nocacheflag and cmode */
...@@ -60,6 +60,57 @@ extern void __iounmap(void *addr, unsigned long size); ...@@ -60,6 +60,57 @@ extern void __iounmap(void *addr, unsigned long size);
#define __raw_writew(val,addr) out_be16((addr),(val)) #define __raw_writew(val,addr) out_be16((addr),(val))
#define __raw_writel(val,addr) out_be32((addr),(val)) #define __raw_writel(val,addr) out_be32((addr),(val))
/*
* Atari ROM port (cartridge port) ISA adapter, used for the EtherNEC NE2000
* network card driver.
* The ISA adapter connects address lines A9-A13 to ISA address lines A0-A4,
* and hardwires the rest of the ISA addresses for a base address of 0x300.
*
* Data lines D8-D15 are connected to ISA data lines D0-D7 for reading.
* For writes, address lines A1-A8 are latched to ISA data lines D0-D7
* (meaning the bit pattern on A1-A8 can be read back as byte).
*
* Read and write operations are distinguished by the base address used:
* reads are from the ROM A side range, writes are through the B side range
* addresses (A side base + 0x10000).
*
* Reads and writes are byte only.
*
* 16 bit reads and writes are necessary for the NetUSBee adapter's USB
* chipset - 16 bit words are read straight off the ROM port while 16 bit
* reads are split into two byte writes. The low byte is latched to the
* NetUSBee buffer by a read from the _read_ window (with the data pattern
* asserted as A1-A8 address pattern). The high byte is then written to the
* write range as usual, completing the write cycle.
*/
#if defined(CONFIG_ATARI_ROM_ISA)
#define rom_in_8(addr) \
({ u16 __v = (*(__force volatile u16 *) (addr)); __v >>= 8; __v; })
#define rom_in_be16(addr) \
({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
#define rom_in_le16(addr) \
({ u16 __v = le16_to_cpu(*(__force volatile u16 *) (addr)); __v; })
#define rom_out_8(addr, b) \
({u8 __w, __v = (b); u32 _addr = ((u32) (addr)); \
__w = ((*(__force volatile u8 *) ((_addr | 0x10000) + (__v<<1)))); })
#define rom_out_be16(addr, w) \
({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
__w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v & 0xFF)<<1)))); \
__w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v >> 8)<<1)))); })
#define rom_out_le16(addr, w) \
({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
__w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v >> 8)<<1)))); \
__w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v & 0xFF)<<1)))); })
#define raw_rom_inb rom_in_8
#define raw_rom_inw rom_in_be16
#define raw_rom_outb(val, port) rom_out_8((port), (val))
#define raw_rom_outw(val, port) rom_out_be16((port), (val))
#endif /* CONFIG_ATARI_ROM_ISA */
static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len) static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
{ {
unsigned int i; unsigned int i;
...@@ -342,6 +393,62 @@ static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf, ...@@ -342,6 +393,62 @@ static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
: "d0", "a0", "a1", "d6"); : "d0", "a0", "a1", "d6");
} }
#if defined(CONFIG_ATARI_ROM_ISA)
static inline void raw_rom_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
{
unsigned int i;
for (i = 0; i < len; i++)
*buf++ = rom_in_8(port);
}
static inline void raw_rom_outsb(volatile u8 __iomem *port, const u8 *buf,
unsigned int len)
{
unsigned int i;
for (i = 0; i < len; i++)
rom_out_8(port, *buf++);
}
static inline void raw_rom_insw(volatile u16 __iomem *port, u16 *buf,
unsigned int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
*buf++ = rom_in_be16(port);
}
static inline void raw_rom_outsw(volatile u16 __iomem *port, const u16 *buf,
unsigned int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
rom_out_be16(port, *buf++);
}
static inline void raw_rom_insw_swapw(volatile u16 __iomem *port, u16 *buf,
unsigned int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
*buf++ = rom_in_le16(port);
}
static inline void raw_rom_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
unsigned int nr)
{
unsigned int i;
for (i = 0; i < nr; i++)
rom_out_le16(port, *buf++);
}
#endif /* CONFIG_ATARI_ROM_ISA */
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#endif /* _RAW_IO_H */ #endif /* _RAW_IO_H */
...@@ -4,15 +4,6 @@ ...@@ -4,15 +4,6 @@
#include <linux/types.h> #include <linux/types.h>
#include <linux/compiler.h> #include <linux/compiler.h>
static inline size_t __kernel_strlen(const char *s)
{
const char *sc;
for (sc = s; *sc++; )
;
return sc - s - 1;
}
static inline char *__kernel_strcpy(char *dest, const char *src) static inline char *__kernel_strcpy(char *dest, const char *src)
{ {
char *xdest = dest; char *xdest = dest;
...@@ -27,11 +18,6 @@ static inline char *__kernel_strcpy(char *dest, const char *src) ...@@ -27,11 +18,6 @@ static inline char *__kernel_strcpy(char *dest, const char *src)
#ifndef __IN_STRING_C #ifndef __IN_STRING_C
#define __HAVE_ARCH_STRLEN
#define strlen(s) (__builtin_constant_p(s) ? \
__builtin_strlen(s) : \
__kernel_strlen(s))
#define __HAVE_ARCH_STRNLEN #define __HAVE_ARCH_STRNLEN
static inline size_t strnlen(const char *s, size_t count) static inline size_t strnlen(const char *s, size_t count)
{ {
......
...@@ -381,6 +381,12 @@ void __init setup_arch(char **cmdline_p) ...@@ -381,6 +381,12 @@ void __init setup_arch(char **cmdline_p)
isa_sex = 1; isa_sex = 1;
} }
#endif #endif
#ifdef CONFIG_ATARI_ROM_ISA
if (MACH_IS_ATARI) {
isa_type = ISA_TYPE_ENEC;
isa_sex = 0;
}
#endif
#endif #endif
} }
......
...@@ -17,6 +17,6 @@ EXPORT_SYMBOL(strcpy); ...@@ -17,6 +17,6 @@ EXPORT_SYMBOL(strcpy);
char *strcat(char *dest, const char *src) char *strcat(char *dest, const char *src)
{ {
return __kernel_strcpy(dest + __kernel_strlen(dest), src); return __kernel_strcpy(dest + strlen(dest), src);
} }
EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strcat);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment