Merge tag 'renesas-backlight-for-v3.12' of...

Merge tag 'renesas-backlight-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM and SH based SoC backlight drivers for v3.12

Backlight drivers used by SH and ARM SH-Mobile boards.

* tag 'renesas-backlight-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: mach-shmobile: ag5evm: Use bd6107 backlight driver
  sh: kfr2r09: Use lv5207lp backlight
  sh: ecovec24: Use gpio-backlight
  ARM: mach-shmobile: mackerel: Use gpio-backlight
  backlight: Add ROHM BD6107 backlight driver
  backlight: Add Sanyo LV5207LP backlight driver
  backlight: Add GPIO-based backlight driver
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-shmobile/board-ag5evm.c

@@ -41,6 +41,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
+#include <linux/platform_data/bd6107.h>
 #include <linux/sh_clk.h>
 #include <linux/irqchip/arm-gic.h>
 #include <video/sh_mobile_lcdc.h>
@@ -291,47 +292,7 @@ static struct platform_device mipidsi0_device = {
 	},
 };
 
-static unsigned char lcd_backlight_seq[3][2] = {
-	{ 0x04, 0x07 },
-	{ 0x23, 0x80 },
-	{ 0x03, 0x01 },
-};
-
-static int lcd_backlight_set_brightness(int brightness)
-{
-	struct i2c_adapter *adap;
-	struct i2c_msg msg;
-	unsigned int i;
-	int ret;
-
-	if (brightness == 0) {
-		/* Reset the chip */
-		gpio_set_value(235, 0);
-		mdelay(24);
-		gpio_set_value(235, 1);
-		return 0;
-	}
-
-	adap = i2c_get_adapter(1);
-	if (adap == NULL)
-		return -ENODEV;
-
-	for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) {
-		msg.addr = 0x6d;
-		msg.buf = &lcd_backlight_seq[i][0];
-		msg.len = 2;
-		msg.flags = 0;
-
-		ret = i2c_transfer(adap, &msg, 1);
-		if (ret < 0)
-			break;
-	}
-
-	i2c_put_adapter(adap);
-	return ret < 0 ? ret : 0;
-}
-
-/* LCDC0 */
+/* LCDC0 and backlight */
 static const struct fb_videomode lcdc0_modes[] = {
 	{
 		.name		= "R63302(QHD)",
@@ -361,11 +322,6 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
 			.width = 44,
 			.height = 79,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = lcd_backlight_set_brightness,
-		},
 		.tx_dev = &mipidsi0_device,
 	}
 };
@@ -394,6 +350,17 @@ static struct platform_device lcdc0_device = {
 	},
 };
 
+static struct bd6107_platform_data backlight_data = {
+	.fbdev = &lcdc0_device.dev,
+	.reset = 235,
+	.def_value = 0,
+};
+
+static struct i2c_board_info backlight_board_info = {
+	I2C_BOARD_INFO("bd6107", 0x6d),
+	.platform_data = &backlight_data,
+};
+
 /* Fixed 2.8V regulators to be used by SDHI0 */
 static struct regulator_consumer_supply fixed2v8_power_consumers[] =
 {
@@ -648,15 +615,15 @@ static void __init ag5evm_init(void)
 	gpio_set_value(217, 1);
 	mdelay(100);
 
-	/* LCD backlight controller */
-	gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	lcd_backlight_set_brightness(0);
 
 #ifdef CONFIG_CACHE_L2X0
 	/* Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
 #endif
 	sh73a0_add_standard_devices();
+
+	i2c_register_board_info(1, &backlight_board_info, 1);
+
 	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
 }
 

arch/arm/mach-shmobile/board-mackerel.c

@@ -41,6 +41,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/sh_flctl.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/pm_clock.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -49,7 +50,6 @@
 #include <linux/tca6416_keypad.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
-
 #include <video/sh_mobile_hdmi.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
@@ -346,7 +346,7 @@ static struct platform_device meram_device = {
 	},
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static struct fb_videomode mackerel_lcdc_modes[] = {
 	{
 		.name		= "WVGA Panel",
@@ -362,13 +362,6 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
 	},
 };
 
-static int mackerel_set_brightness(int brightness)
-{
-	gpio_set_value(31, brightness);
-
-	return 0;
-}
-
 static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
 	.icb[0] = {
 		.meram_size     = 0x40,
@@ -393,11 +386,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width		= 152,
 			.height		= 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = mackerel_set_brightness,
-		},
 		.meram_cfg = &lcd_meram_cfg,
 	}
 };
@@ -425,6 +413,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = 31,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* HDMI */
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.flags		= HDMI_SND_SRC_SPDIF,
@@ -1231,6 +1233,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&usbhs0_device,
 	&usbhs1_device,
 	&leds_device,
@@ -1441,9 +1444,6 @@ static void __init mackerel_init(void)
 				  ARRAY_SIZE(mackerel_pinctrl_map));
 	sh7372_pinmux_init();
 
-	/* backlight, off by default */
-	gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
-
 	gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
 
 	/* USBHS0 */

arch/sh/boards/mach-ecovec24/setup.c

@@ -30,6 +30,7 @@
 #include <linux/spi/mmc_spi.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
+#include <linux/platform_data/gpio_backlight.h>
 #include <linux/sh_eth.h>
 #include <linux/sh_intc.h>
 #include <linux/videodev2.h>
@@ -303,7 +304,7 @@ static struct platform_device usbhs_device = {
 	.resource	= usbhs_resources,
 };
 
-/* LCDC */
+/* LCDC and backlight */
 static const struct fb_videomode ecovec_lcd_modes[] = {
 	{
 		.name		= "Panel",
@@ -334,13 +335,6 @@ static const struct fb_videomode ecovec_dvi_modes[] = {
 	},
 };
 
-static int ecovec24_set_brightness(int brightness)
-{
-	gpio_set_value(GPIO_PTR1, brightness);
-
-	return 0;
-}
-
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.ch[0] = {
 		.interface_type = RGB18,
@@ -350,11 +344,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.width = 152,
 			.height = 91,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = ecovec24_set_brightness,
-		},
 	}
 };
 
@@ -380,6 +369,20 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = GPIO_PTR1,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
 /* CEU0 */
 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
 	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
@@ -1049,6 +1052,7 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&usb1_common_device,
 	&usbhs_device,
 	&lcdc_device,
+	&gpio_backlight_device,
 	&ceu0_device,
 	&ceu1_device,
 	&keysc_device,
@@ -1239,11 +1243,9 @@ static int __init arch_setup(void)
 
 	gpio_request(GPIO_PTE6, NULL);
 	gpio_request(GPIO_PTU1, NULL);
-	gpio_request(GPIO_PTR1, NULL);
 	gpio_request(GPIO_PTA2, NULL);
 	gpio_direction_input(GPIO_PTE6);
 	gpio_direction_output(GPIO_PTU1, 0);
-	gpio_direction_output(GPIO_PTR1, 0);
 	gpio_direction_output(GPIO_PTA2, 0);
 
 	/* I/O buffer drive ability is high */
@@ -1256,6 +1258,9 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
 
+		/* No backlight */
+		gpio_backlight_data.fbdev = NULL;
+
 		gpio_set_value(GPIO_PTA2, 1);
 		gpio_set_value(GPIO_PTU1, 1);
 	} else {
@@ -1265,8 +1270,6 @@ static int __init arch_setup(void)
 		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
 		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
 
-		gpio_set_value(GPIO_PTR1, 1);
-
 		/* FIXME
 		 *
 		 * LCDDON control is needed for Panel,

arch/sh/boards/mach-kfr2r09/lcd_wqvga.c

@@ -276,51 +276,3 @@ void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
 {
 	write_memory_start(sohandle, so);
 }
-
-#define CTRL_CKSW       0x10
-#define CTRL_C10        0x20
-#define CTRL_CPSW       0x80
-#define MAIN_MLED4      0x40
-#define MAIN_MSW        0x80
-
-int kfr2r09_lcd_set_brightness(int brightness)
-{
-	struct i2c_adapter *a;
-	struct i2c_msg msg;
-	unsigned char buf[2];
-	int ret;
-
-	a = i2c_get_adapter(0);
-	if (!a)
-		return -ENODEV;
-
-	buf[0] = 0x00;
-	if (brightness)
-		buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW;
-	else
-		buf[1] = 0;
-
-	msg.addr = 0x75;
-	msg.buf = buf;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	if (ret != 1)
-		return -ENODEV;
-
-	buf[0] = 0x01;
-	if (brightness)
-		buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c;
-	else
-		buf[1] = 0;
-
-	msg.addr = 0x75;
-	msg.buf = buf;
-	msg.len = 2;
-	msg.flags = 0;
-	ret = i2c_transfer(a, &msg, 1);
-	if (ret != 1)
-		return -ENODEV;
-
-	return 0;
-}

arch/sh/boards/mach-kfr2r09/setup.c

@@ -21,6 +21,7 @@
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/i2c.h>
+#include <linux/platform_data/lv5207lp.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/usb/r8a66597.h>
@@ -159,11 +160,6 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
 			.setup_sys = kfr2r09_lcd_setup,
 			.start_transfer = kfr2r09_lcd_start,
 		},
-		.bl_info = {
-			.name = "sh_mobile_lcdc_bl",
-			.max_brightness = 1,
-			.set_brightness = kfr2r09_lcd_set_brightness,
-		},
 		.sys_bus_cfg = {
 			.ldmt2r = 0x07010904,
 			.ldmt3r = 0x14012914,
@@ -195,6 +191,17 @@ static struct platform_device kfr2r09_sh_lcdc_device = {
 	},
 };
 
+static struct lv5207lp_platform_data kfr2r09_backlight_data = {
+	.fbdev = &kfr2r09_sh_lcdc_device.dev,
+	.def_value = 13,
+	.max_value = 13,
+};
+
+static struct i2c_board_info kfr2r09_backlight_board_info = {
+	I2C_BOARD_INFO("lv5207lp", 0x75),
+	.platform_data = &kfr2r09_backlight_data,
+};
+
 static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
 	.on_chip = 1,
 };
@@ -627,6 +634,8 @@ static int __init kfr2r09_devices_setup(void)
 	gpio_request(GPIO_FN_SDHI0CMD, NULL);
 	gpio_request(GPIO_FN_SDHI0CLK, NULL);
 
+	i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
+
 	return platform_add_devices(kfr2r09_devices,
 				    ARRAY_SIZE(kfr2r09_devices));
 }

arch/sh/include/mach-kfr2r09/mach/kfr2r09.h

@@ -4,13 +4,11 @@
 #include <video/sh_mobile_lcdc.h>
 
 #if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
-int kfr2r09_lcd_set_brightness(int brightness);
 int kfr2r09_lcd_setup(void *sys_ops_handle,
 		      struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 void kfr2r09_lcd_start(void *sys_ops_handle,
 		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
 #else
-static int kfr2r09_lcd_set_brightness(int brightness) {}
 static int kfr2r09_lcd_setup(void *sys_ops_handle,
 				struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
 {

drivers/video/backlight/Kconfig

@@ -425,6 +425,25 @@ config BACKLIGHT_AS3711
 	  If you have an Austrian Microsystems AS3711 say Y to enable the
 	  backlight driver.
 
+config BACKLIGHT_GPIO
+	tristate "Generic GPIO based Backlight Driver"
+	depends on GPIOLIB
+	help
+	  If you have a LCD backlight adjustable by GPIO, say Y to enable
+	  this driver.
+
+config BACKLIGHT_LV5207LP
+	tristate "Sanyo LV5207LP Backlight"
+	depends on I2C
+	help
+	  If you have a Sanyo LV5207LP say Y to enable the backlight driver.
+
+config BACKLIGHT_BD6107
+	tristate "Rohm BD6107 Backlight"
+	depends on I2C
+	help
+	  If you have a Rohm BD6107 say Y to enable the backlight driver.
+
 endif # BACKLIGHT_CLASS_DEVICE
 
 endif # BACKLIGHT_LCD_SUPPORT

drivers/video/backlight/Makefile

@@ -26,12 +26,14 @@ obj-$(CONFIG_BACKLIGHT_ADP8870)		+= adp8870_bl.o
 obj-$(CONFIG_BACKLIGHT_APPLE)		+= apple_bl.o
 obj-$(CONFIG_BACKLIGHT_AS3711)		+= as3711_bl.o
 obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)	+= atmel-pwm-bl.o
+obj-$(CONFIG_BACKLIGHT_BD6107)		+= bd6107.o
 obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH)	+= cr_bllcd.o
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE)	+= backlight.o
 obj-$(CONFIG_BACKLIGHT_DA903X)		+= da903x_bl.o
 obj-$(CONFIG_BACKLIGHT_DA9052)		+= da9052_bl.o
 obj-$(CONFIG_BACKLIGHT_EP93XX)		+= ep93xx_bl.o
 obj-$(CONFIG_BACKLIGHT_GENERIC)		+= generic_bl.o
+obj-$(CONFIG_BACKLIGHT_GPIO)		+= gpio_backlight.o
 obj-$(CONFIG_BACKLIGHT_HP680)		+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_HP700)		+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
@@ -40,6 +42,7 @@ obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
 obj-$(CONFIG_BACKLIGHT_LOCOMO)		+= locomolcd.o
 obj-$(CONFIG_BACKLIGHT_LP855X)		+= lp855x_bl.o
 obj-$(CONFIG_BACKLIGHT_LP8788)		+= lp8788_bl.o
+obj-$(CONFIG_BACKLIGHT_LV5207LP)	+= lv5207lp.o
 obj-$(CONFIG_BACKLIGHT_MAX8925)		+= max8925_bl.o
 obj-$(CONFIG_BACKLIGHT_OMAP1)		+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_OT200)		+= ot200_bl.o

drivers/video/backlight/bd6107.c

+/*
+ * ROHM Semiconductor BD6107 LED Driver
+ *
+ * Copyright (C) 2013 Ideas on board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_data/bd6107.h>
+#include <linux/slab.h>
+
+#define BD6107_PSCNT1				0x00
+#define BD6107_PSCNT1_PSCNTREG2			(1 << 2)
+#define BD6107_PSCNT1_PSCNTREG1			(1 << 0)
+#define BD6107_REGVSET				0x02
+#define BD6107_REGVSET_REG1VSET_2_85V		(1 << 2)
+#define BD6107_REGVSET_REG1VSET_2_80V		(0 << 2)
+#define BD6107_LEDCNT1				0x03
+#define BD6107_LEDCNT1_LEDONOFF2		(1 << 1)
+#define BD6107_LEDCNT1_LEDONOFF1		(1 << 0)
+#define BD6107_PORTSEL				0x04
+#define BD6107_PORTSEL_LEDM(n)			(1 << (n))
+#define BD6107_RGB1CNT1				0x05
+#define BD6107_RGB1CNT2				0x06
+#define BD6107_RGB1CNT3				0x07
+#define BD6107_RGB1CNT4				0x08
+#define BD6107_RGB1CNT5				0x09
+#define BD6107_RGB1FLM				0x0a
+#define BD6107_RGB2CNT1				0x0b
+#define BD6107_RGB2CNT2				0x0c
+#define BD6107_RGB2CNT3				0x0d
+#define BD6107_RGB2CNT4				0x0e
+#define BD6107_RGB2CNT5				0x0f
+#define BD6107_RGB2FLM				0x10
+#define BD6107_PSCONT3				0x11
+#define BD6107_SMMONCNT				0x12
+#define BD6107_DCDCCNT				0x13
+#define BD6107_IOSEL				0x14
+#define BD6107_OUT1				0x15
+#define BD6107_OUT2				0x16
+#define BD6107_MASK1				0x17
+#define BD6107_MASK2				0x18
+#define BD6107_FACTOR1				0x19
+#define BD6107_FACTOR2				0x1a
+#define BD6107_CLRFACT1				0x1b
+#define BD6107_CLRFACT2				0x1c
+#define BD6107_STATE1				0x1d
+#define BD6107_LSIVER				0x1e
+#define BD6107_GRPSEL				0x1f
+#define BD6107_LEDCNT2				0x20
+#define BD6107_LEDCNT3				0x21
+#define BD6107_MCURRENT				0x22
+#define BD6107_MAINCNT1				0x23
+#define BD6107_MAINCNT2				0x24
+#define BD6107_SLOPECNT				0x25
+#define BD6107_MSLOPE				0x26
+#define BD6107_RGBSLOPE				0x27
+#define BD6107_TEST				0x29
+#define BD6107_SFTRST				0x2a
+#define BD6107_SFTRSTGD				0x2b
+
+struct bd6107 {
+	struct i2c_client *client;
+	struct backlight_device *backlight;
+	struct bd6107_platform_data *pdata;
+};
+
+static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data)
+{
+	return i2c_smbus_write_byte_data(bd->client, reg, data);
+}
+
+static int bd6107_backlight_update_status(struct backlight_device *backlight)
+{
+	struct bd6107 *bd = bl_get_data(backlight);
+	int brightness = backlight->props.brightness;
+
+	if (backlight->props.power != FB_BLANK_UNBLANK ||
+	    backlight->props.fb_blank != FB_BLANK_UNBLANK ||
+	    backlight->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
+		brightness = 0;
+
+	if (brightness) {
+		bd6107_write(bd, BD6107_PORTSEL, BD6107_PORTSEL_LEDM(2) |
+			     BD6107_PORTSEL_LEDM(1) | BD6107_PORTSEL_LEDM(0));
+		bd6107_write(bd, BD6107_MAINCNT1, brightness);
+		bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1);
+	} else {
+		gpio_set_value(bd->pdata->reset, 0);
+		msleep(24);
+		gpio_set_value(bd->pdata->reset, 1);
+	}
+
+	return 0;
+}
+
+static int bd6107_backlight_get_brightness(struct backlight_device *backlight)
+{
+	return backlight->props.brightness;
+}
+
+static int bd6107_backlight_check_fb(struct backlight_device *backlight,
+				       struct fb_info *info)
+{
+	struct bd6107 *bd = bl_get_data(backlight);
+
+	return bd->pdata->fbdev == NULL || bd->pdata->fbdev == info->dev;
+}
+
+static const struct backlight_ops bd6107_backlight_ops = {
+	.options	= BL_CORE_SUSPENDRESUME,
+	.update_status	= bd6107_backlight_update_status,
+	.get_brightness	= bd6107_backlight_get_brightness,
+	.check_fb	= bd6107_backlight_check_fb,
+};
+
+static int bd6107_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct bd6107_platform_data *pdata = client->dev.platform_data;
+	struct backlight_device *backlight;
+	struct backlight_properties props;
+	struct bd6107 *bd;
+	int ret;
+
+	if (pdata == NULL || !pdata->reset) {
+		dev_err(&client->dev, "No reset GPIO in platform data\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_warn(&client->dev,
+			 "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
+		return -EIO;
+	}
+
+	bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
+	if (!bd)
+		return -ENOMEM;
+
+	bd->client = client;
+	bd->pdata = pdata;
+
+	ret = devm_gpio_request_one(&client->dev, pdata->reset,
+				    GPIOF_DIR_OUT | GPIOF_INIT_LOW, "reset");
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to request reset GPIO\n");
+		return ret;
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 128;
+	props.brightness = clamp_t(unsigned int, pdata->def_value, 0,
+				   props.max_brightness);
+
+	backlight = backlight_device_register(dev_name(&client->dev),
+					      &bd->client->dev, bd,
+					      &bd6107_backlight_ops, &props);
+	if (IS_ERR(backlight)) {
+		dev_err(&client->dev, "failed to register backlight\n");
+		return PTR_ERR(backlight);
+	}
+
+	backlight_update_status(backlight);
+	i2c_set_clientdata(client, backlight);
+
+	return 0;
+}
+
+static int bd6107_remove(struct i2c_client *client)
+{
+	struct backlight_device *backlight = i2c_get_clientdata(client);
+
+	backlight->props.brightness = 0;
+	backlight_update_status(backlight);
+	backlight_device_unregister(backlight);
+
+	return 0;
+}
+
+static const struct i2c_device_id bd6107_ids[] = {
+	{ "bd6107", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bd6107_ids);
+
+static struct i2c_driver bd6107_driver = {
+	.driver = {
+		.name = "bd6107",
+	},
+	.probe = bd6107_probe,
+	.remove = bd6107_remove,
+	.id_table = bd6107_ids,
+};
+
+module_i2c_driver(bd6107_driver);
+
+MODULE_DESCRIPTION("Rohm BD6107 Backlight Driver");
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_LICENSE("GPL");

drivers/video/backlight/gpio_backlight.c

+/*
+ * gpio_backlight.c - Simple GPIO-controlled backlight
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/gpio_backlight.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct gpio_backlight {
+	struct device *dev;
+	struct device *fbdev;
+
+	int gpio;
+	int active;
+};
+
+static int gpio_backlight_update_status(struct backlight_device *bl)
+{
+	struct gpio_backlight *gbl = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
+	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
+		brightness = 0;
+
+	gpio_set_value(gbl->gpio, brightness ? gbl->active : !gbl->active);
+
+	return 0;
+}
+
+static int gpio_backlight_get_brightness(struct backlight_device *bl)
+{
+	return bl->props.brightness;
+}
+
+static int gpio_backlight_check_fb(struct backlight_device *bl,
+				   struct fb_info *info)
+{
+	struct gpio_backlight *gbl = bl_get_data(bl);
+
+	return gbl->fbdev == NULL || gbl->fbdev == info->dev;
+}
+
+static const struct backlight_ops gpio_backlight_ops = {
+	.options	= BL_CORE_SUSPENDRESUME,
+	.update_status	= gpio_backlight_update_status,
+	.get_brightness	= gpio_backlight_get_brightness,
+	.check_fb	= gpio_backlight_check_fb,
+};
+
+static int gpio_backlight_probe(struct platform_device *pdev)
+{
+	struct gpio_backlight_platform_data *pdata = pdev->dev.platform_data;
+	struct backlight_properties props;
+	struct backlight_device *bl;
+	struct gpio_backlight *gbl;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "failed to find platform data\n");
+		return -ENODEV;
+	}
+
+	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
+	if (gbl == NULL)
+		return -ENOMEM;
+
+	gbl->dev = &pdev->dev;
+	gbl->fbdev = pdata->fbdev;
+	gbl->gpio = pdata->gpio;
+	gbl->active = pdata->active_low ? 0 : 1;
+
+	ret = devm_gpio_request_one(gbl->dev, gbl->gpio, GPIOF_DIR_OUT |
+				    (gbl->active ? GPIOF_INIT_LOW
+						 : GPIOF_INIT_HIGH),
+				    pdata->name);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to request GPIO\n");
+		return ret;
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 1;
+	bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, gbl,
+				       &gpio_backlight_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		return PTR_ERR(bl);
+	}
+
+	bl->props.brightness = pdata->def_value;
+	backlight_update_status(bl);
+
+	platform_set_drvdata(pdev, bl);
+	return 0;
+}
+
+static int gpio_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+
+	backlight_device_unregister(bl);
+	return 0;
+}
+
+static struct platform_driver gpio_backlight_driver = {
+	.driver		= {
+		.name		= "gpio-backlight",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= gpio_backlight_probe,
+	.remove		= gpio_backlight_remove,
+};
+
+module_platform_driver(gpio_backlight_driver);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_DESCRIPTION("GPIO-based Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-backlight");

drivers/video/backlight/lv5207lp.c

+/*
+ * Sanyo LV5207LP LED Driver
+ *
+ * Copyright (C) 2013 Ideas on board SPRL
+ *
+ * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_data/lv5207lp.h>
+#include <linux/slab.h>
+
+#define LV5207LP_CTRL1			0x00
+#define LV5207LP_CPSW			(1 << 7)
+#define LV5207LP_SCTEN			(1 << 6)
+#define LV5207LP_C10			(1 << 5)
+#define LV5207LP_CKSW			(1 << 4)
+#define LV5207LP_RSW			(1 << 3)
+#define LV5207LP_GSW			(1 << 2)
+#define LV5207LP_BSW			(1 << 1)
+#define LV5207LP_CTRL2			0x01
+#define LV5207LP_MSW			(1 << 7)
+#define LV5207LP_MLED4			(1 << 6)
+#define LV5207LP_RED			0x02
+#define LV5207LP_GREEN			0x03
+#define LV5207LP_BLUE			0x04
+
+#define LV5207LP_MAX_BRIGHTNESS		32
+
+struct lv5207lp {
+	struct i2c_client *client;
+	struct backlight_device *backlight;
+	struct lv5207lp_platform_data *pdata;
+};
+
+static int lv5207lp_write(struct lv5207lp *lv, u8 reg, u8 data)
+{
+	return i2c_smbus_write_byte_data(lv->client, reg, data);
+}
+
+static int lv5207lp_backlight_update_status(struct backlight_device *backlight)
+{
+	struct lv5207lp *lv = bl_get_data(backlight);
+	int brightness = backlight->props.brightness;
+
+	if (backlight->props.power != FB_BLANK_UNBLANK ||
+	    backlight->props.fb_blank != FB_BLANK_UNBLANK ||
+	    backlight->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
+		brightness = 0;
+
+	if (brightness) {
+		lv5207lp_write(lv, LV5207LP_CTRL1,
+			       LV5207LP_CPSW | LV5207LP_C10 | LV5207LP_CKSW);
+		lv5207lp_write(lv, LV5207LP_CTRL2,
+			       LV5207LP_MSW | LV5207LP_MLED4 |
+			       (brightness - 1));
+	} else {
+		lv5207lp_write(lv, LV5207LP_CTRL1, 0);
+		lv5207lp_write(lv, LV5207LP_CTRL2, 0);
+	}
+
+	return 0;
+}
+
+static int lv5207lp_backlight_get_brightness(struct backlight_device *backlight)
+{
+	return backlight->props.brightness;
+}
+
+static int lv5207lp_backlight_check_fb(struct backlight_device *backlight,
+				       struct fb_info *info)
+{
+	struct lv5207lp *lv = bl_get_data(backlight);
+
+	return lv->pdata->fbdev == NULL || lv->pdata->fbdev == info->dev;
+}
+
+static const struct backlight_ops lv5207lp_backlight_ops = {
+	.options	= BL_CORE_SUSPENDRESUME,
+	.update_status	= lv5207lp_backlight_update_status,
+	.get_brightness	= lv5207lp_backlight_get_brightness,
+	.check_fb	= lv5207lp_backlight_check_fb,
+};
+
+static int lv5207lp_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct lv5207lp_platform_data *pdata = client->dev.platform_data;
+	struct backlight_device *backlight;
+	struct backlight_properties props;
+	struct lv5207lp *lv;
+
+	if (pdata == NULL) {
+		dev_err(&client->dev, "No platform data supplied\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_warn(&client->dev,
+			 "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
+		return -EIO;
+	}
+
+	lv = devm_kzalloc(&client->dev, sizeof(*lv), GFP_KERNEL);
+	if (!lv)
+		return -ENOMEM;
+
+	lv->client = client;
+	lv->pdata = pdata;
+
+	memset(&props, 0, sizeof(props));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = min_t(unsigned int, pdata->max_value,
+				     LV5207LP_MAX_BRIGHTNESS);
+	props.brightness = clamp_t(unsigned int, pdata->def_value, 0,
+				   props.max_brightness);
+
+	backlight = backlight_device_register(dev_name(&client->dev),
+					      &lv->client->dev, lv,
+					      &lv5207lp_backlight_ops, &props);
+	if (IS_ERR(backlight)) {
+		dev_err(&client->dev, "failed to register backlight\n");
+		return PTR_ERR(backlight);
+	}
+
+	backlight_update_status(backlight);
+	i2c_set_clientdata(client, backlight);
+
+	return 0;
+}
+
+static int lv5207lp_remove(struct i2c_client *client)
+{
+	struct backlight_device *backlight = i2c_get_clientdata(client);
+
+	backlight->props.brightness = 0;
+	backlight_update_status(backlight);
+	backlight_device_unregister(backlight);
+
+	return 0;
+}
+
+static const struct i2c_device_id lv5207lp_ids[] = {
+	{ "lv5207lp", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lv5207lp_ids);
+
+static struct i2c_driver lv5207lp_driver = {
+	.driver = {
+		.name = "lv5207lp",
+	},
+	.probe = lv5207lp_probe,
+	.remove = lv5207lp_remove,
+	.id_table = lv5207lp_ids,
+};
+
+module_i2c_driver(lv5207lp_driver);
+
+MODULE_DESCRIPTION("Sanyo LV5207LP Backlight Driver");
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
+MODULE_LICENSE("GPL");

include/linux/platform_data/bd6107.h

+/*
+ * bd6107.h - Rohm BD6107 LEDs Driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __BD6107_H__
+#define __BD6107_H__
+
+struct device;
+
+struct bd6107_platform_data {
+	struct device *fbdev;
+	int reset;			/* Reset GPIO */
+	unsigned int def_value;
+};
+
+#endif

include/linux/platform_data/gpio_backlight.h

+/*
+ * gpio_backlight.h - Simple GPIO-controlled backlight
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __GPIO_BACKLIGHT_H__
+#define __GPIO_BACKLIGHT_H__
+
+struct device;
+
+struct gpio_backlight_platform_data {
+	struct device *fbdev;
+	int gpio;
+	int def_value;
+	bool active_low;
+	const char *name;
+};
+
+#endif

include/linux/platform_data/lv5207lp.h

+/*
+ * lv5207lp.h - Sanyo LV5207LP LEDs Driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LV5207LP_H__
+#define __LV5207LP_H__
+
+struct device;
+
+struct lv5207lp_platform_data {
+	struct device *fbdev;
+	unsigned int max_value;
+	unsigned int def_value;
+};
+
+#endif