Commit 169c474f authored by William Breathitt Gray's avatar William Breathitt Gray Committed by Linus Torvalds

bitops: introduce the for_each_set_clump8 macro

Pach series "Introduce the for_each_set_clump8 macro", v18.

While adding GPIO get_multiple/set_multiple callback support for various
drivers, I noticed a pattern of looping manifesting that would be useful
standardized as a macro.

This patchset introduces the for_each_set_clump8 macro and utilizes it
in several GPIO drivers.  The for_each_set_clump macro8 facilitates a
for-loop syntax that iterates over a memory region entire groups of set
bits at a time.

For example, suppose you would like to iterate over a 32-bit integer 8
bits at a time, skipping over 8-bit groups with no set bit, where
XXXXXXXX represents the current 8-bit group:

    Example:        10111110 00000000 11111111 00110011
    First loop:     10111110 00000000 11111111 XXXXXXXX
    Second loop:    10111110 00000000 XXXXXXXX 00110011
    Third loop:     XXXXXXXX 00000000 11111111 00110011

Each iteration of the loop returns the next 8-bit group that has at
least one set bit.

The for_each_set_clump8 macro has four parameters:

    * start: set to the bit offset of the current clump
    * clump: set to the current clump value
    * bits: bitmap to search within
    * size: bitmap size in number of bits

In this version of the patchset, the for_each_set_clump macro has been
reimplemented and simplified based on the suggestions provided by Rasmus
Villemoes and Andy Shevchenko in the version 4 submission.

In particular, the function of the for_each_set_clump macro has been
restricted to handle only 8-bit clumps; the drivers that use the
for_each_set_clump macro only handle 8-bit ports so a generic
for_each_set_clump implementation is not necessary.  Thus, a solution
for large clumps (i.e.  those larger than the width of a bitmap word)
can be postponed until a driver appears that actually requires such a
generic for_each_set_clump implementation.

For what it's worth, a semi-generic for_each_set_clump (i.e.  for clumps
smaller than the width of a bitmap word) can be implemented by simply
replacing the hardcoded '8' and '0xFF' instances with respective
variables.  I have not yet had a need for such an implementation, and
since it falls short of a true generic for_each_set_clump function, I
have decided to forgo such an implementation for now.

In addition, the bitmap_get_value8 and bitmap_set_value8 functions are
introduced to get and set 8-bit values respectively.  Their use is based
on the behavior suggested in the patchset version 4 review.

This patch (of 14):

This macro iterates for each 8-bit group of bits (clump) with set bits,
within a bitmap memory region.  For each iteration, "start" is set to
the bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump".  Additionally, the
bitmap_get_value8 and bitmap_set_value8 functions are introduced to
respectively get and set an 8-bit value in a bitmap memory region.

[gustavo@embeddedor.com: fix potential sign-extension overflow]
  Link: http://lkml.kernel.org/r/20191015184657.GA26541@embeddedor
[akpm@linux-foundation.org: s/ULL/UL/, per Joe]
[vilhelm.gray@gmail.com: add for_each_set_clump8 documentation]
  Link: http://lkml.kernel.org/r/20191016161825.301082-1-vilhelm.gray@gmail.com
Link: http://lkml.kernel.org/r/893c3b4f03266c9496137cc98ac2b1bd27f92c73.1570641097.git.vilhelm.gray@gmail.comSigned-off-by: default avatarWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
Suggested-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: default avatarRasmus Villemoes <linux@rasmusvillemoes.dk>
Suggested-by: default avatarLukas Wunner <lukas@wunner.de>
Tested-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 5e1aada0
......@@ -80,4 +80,21 @@ extern unsigned long find_first_zero_bit(const unsigned long *addr,
#endif /* CONFIG_GENERIC_FIND_FIRST_BIT */
/**
* find_next_clump8 - find next 8-bit clump with set bits in a memory region
* @clump: location to store copy of found clump
* @addr: address to base the search on
* @size: bitmap size in number of bits
* @offset: bit offset at which to start searching
*
* Returns the bit offset for the next set clump; the found clump value is
* copied to the location pointed by @clump. If no bits are set, returns @size.
*/
extern unsigned long find_next_clump8(unsigned long *clump,
const unsigned long *addr,
unsigned long size, unsigned long offset);
#define find_first_clump8(clump, bits, size) \
find_next_clump8((clump), (bits), (size), 0)
#endif /*_ASM_GENERIC_BITOPS_FIND_H_ */
......@@ -66,6 +66,8 @@
* bitmap_allocate_region(bitmap, pos, order) Allocate specified bit region
* bitmap_from_arr32(dst, buf, nbits) Copy nbits from u32[] buf to dst
* bitmap_to_arr32(buf, src, nbits) Copy nbits from buf to u32[] dst
* bitmap_get_value8(map, start) Get 8bit value from map at start
* bitmap_set_value8(map, value, start) Set 8bit value to map at start
*
* Note, bitmap_zero() and bitmap_fill() operate over the region of
* unsigned longs, that is, bits behind bitmap till the unsigned long
......@@ -489,6 +491,39 @@ static inline void bitmap_from_u64(unsigned long *dst, u64 mask)
dst[1] = mask >> 32;
}
/**
* bitmap_get_value8 - get an 8-bit value within a memory region
* @map: address to the bitmap memory region
* @start: bit offset of the 8-bit value; must be a multiple of 8
*
* Returns the 8-bit value located at the @start bit offset within the @src
* memory region.
*/
static inline unsigned long bitmap_get_value8(const unsigned long *map,
unsigned long start)
{
const size_t index = BIT_WORD(start);
const unsigned long offset = start % BITS_PER_LONG;
return (map[index] >> offset) & 0xFF;
}
/**
* bitmap_set_value8 - set an 8-bit value within a memory region
* @map: address to the bitmap memory region
* @value: the 8-bit value; values wider than 8 bits may clobber bitmap
* @start: bit offset of the 8-bit value; must be a multiple of 8
*/
static inline void bitmap_set_value8(unsigned long *map, unsigned long value,
unsigned long start)
{
const size_t index = BIT_WORD(start);
const unsigned long offset = start % BITS_PER_LONG;
map[index] &= ~(0xFFUL << offset);
map[index] |= value << offset;
}
#endif /* __ASSEMBLY__ */
#endif /* __LINUX_BITMAP_H */
......@@ -47,6 +47,18 @@ extern unsigned long __sw_hweight64(__u64 w);
(bit) < (size); \
(bit) = find_next_zero_bit((addr), (size), (bit) + 1))
/**
* for_each_set_clump8 - iterate over bitmap for each 8-bit clump with set bits
* @start: bit offset to start search and to store the current iteration offset
* @clump: location to store copy of current 8-bit clump
* @bits: bitmap address to base the search on
* @size: bitmap size in number of bits
*/
#define for_each_set_clump8(start, clump, bits, size) \
for ((start) = find_first_clump8(&(clump), (bits), (size)); \
(start) < (size); \
(start) = find_next_clump8(&(clump), (bits), (size), (start) + 8))
static inline int get_bitmask_order(unsigned int count)
{
int order;
......
......@@ -214,3 +214,17 @@ EXPORT_SYMBOL(find_next_bit_le);
#endif
#endif /* __BIG_ENDIAN */
unsigned long find_next_clump8(unsigned long *clump, const unsigned long *addr,
unsigned long size, unsigned long offset)
{
offset = find_next_bit(addr, size, offset);
if (offset == size)
return size;
offset = round_down(offset, 8);
*clump = bitmap_get_value8(addr, offset);
return offset;
}
EXPORT_SYMBOL(find_next_clump8);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment