Commit 174e7796 authored by Linus Walleij's avatar Linus Walleij

ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>

This removes <mach/hardware.h> and <mach/db8500-regs.h>
from the Ux500, merging them into the local include
"db8500-regs.h" in mach-ux500. There is some impact
outside the ux500 machine, but most of it is dealt with
in earlier patches.

Contains portions of a clean-up patch from Arnd Bergmann.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: default avatarMike Turquette <mturquette@linaro.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e5a1f682
......@@ -11,7 +11,6 @@
#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <linux/platform_data/asoc-ux500-msp.h>
......
......@@ -13,8 +13,6 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include "pins-db8500.h"
#include "board-mop500.h"
......
......@@ -15,8 +15,8 @@
#include <asm/mach-types.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include "db8500-regs.h"
#include "devices-db8500.h"
#include "board-mop500.h"
#include "ste-dma40-db8500.h"
......
......@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <mach/hardware.h>
#include "board-mop500.h"
#include "id.h"
......
......@@ -41,13 +41,13 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
#include <linux/platform_data/crypto-ux500.h>
#include "ste-dma40-db8500.h"
#include "db8500-regs.h"
#include "devices-db8500.h"
#include "board-mop500.h"
#include "board-mop500-regulators.h"
......
......@@ -9,8 +9,8 @@
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/hardware.h>
#include "db8500-regs.h"
#include "id.h"
static void __iomem *l2x0_base;
......
......@@ -28,15 +28,13 @@
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/db8500-regs.h>
#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
#include "db8500-regs.h"
#include "board-mop500.h"
#include "id.h"
......
......@@ -24,11 +24,11 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include "board-mop500.h"
#include "db8500-regs.h"
#include "id.h"
/*
......
......@@ -21,6 +21,8 @@
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
#include "db8500-regs.h"
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device);
......
......@@ -170,4 +170,32 @@
/* SoC identification number information */
#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0)
/* Offsets to specific addresses in some IP blocks for DMA */
#define MSP_TX_RX_REG_OFFSET 0
#define CRYP1_RX_REG_OFFSET 0x10
#define CRYP1_TX_REG_OFFSET 0x8
#define HASH1_TX_REG_OFFSET 0x4
/*
* Macros to get at IO space when running virtually
* We dont map all the peripherals, let ioremap do
* this for us. We map only very basic peripherals here.
*/
#define U8500_IO_VIRTUAL 0xf0000000
#define U8500_IO_PHYSICAL 0xa0000000
/* This is where we map in the ROM to check ASIC IDs */
#define UX500_VIRT_ROM 0xf0000000
/* This macro is used in assembly, so no cast */
#define IO_ADDRESS(x) \
(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
/* typesafe io address */
#define __io_address(n) IOMEM(IO_ADDRESS(n))
/* Used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif
......@@ -13,7 +13,6 @@
#include <linux/platform_device.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "devices-common.h"
......
......@@ -15,10 +15,10 @@
#include <linux/platform_data/dma-ste-dma40.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/irqs.h>
#include "db8500-regs.h"
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
......
......@@ -10,6 +10,7 @@
#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/irqs.h>
#include "db8500-regs.h"
#include "devices-common.h"
struct ske_keypad_platform_data;
......
......@@ -11,9 +11,10 @@
#include <linux/io.h>
#include <linux/amba/bus.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include "db8500-regs.h"
void __init amba_add_devices(struct amba_device *devs[], int num)
{
int i;
......
......@@ -14,9 +14,9 @@
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include "db8500-regs.h"
#include "id.h"
struct dbx500_asic_id dbx500_id;
......
/*
* Copyright (C) 2009 ST-Ericsson.
*
* U8500 hardware definitions
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
/*
* Macros to get at IO space when running virtually
* We dont map all the peripherals, let ioremap do
* this for us. We map only very basic peripherals here.
*/
#define U8500_IO_VIRTUAL 0xf0000000
#define U8500_IO_PHYSICAL 0xa0000000
/* This is where we map in the ROM to check ASIC IDs */
#define UX500_VIRT_ROM 0xf0000000
/* This macro is used in assembly, so no cast */
#define IO_ADDRESS(x) \
(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
/* typesafe io address */
#define __io_address(n) IOMEM(IO_ADDRESS(n))
/* Used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
#include <mach/db8500-regs.h>
#define MSP_TX_RX_REG_OFFSET 0
#define CRYP1_RX_REG_OFFSET 0x10
#define CRYP1_TX_REG_OFFSET 0x8
#define HASH1_TX_REG_OFFSET 0x4
#ifndef __ASSEMBLY__
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif /* __ASSEMBLY__ */
#endif /* __MACH_HARDWARE_H */
......@@ -10,8 +10,6 @@
#ifndef ASM_ARCH_IRQS_H
#define ASM_ARCH_IRQS_H
#include <mach/hardware.h>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
......
......@@ -22,7 +22,8 @@
#include <asm/mach-types.h>
#include <linux/io.h>
#include <linux/amba/serial.h>
#include <mach/hardware.h>
/* TODO: This goes away in multiplatform boot, this file gets deleted */
#include "../../db8500-regs.h"
void __iomem *ux500_uart_base;
......
......@@ -22,9 +22,9 @@
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include "db8500-regs.h"
#include "id.h"
/* This is called from headsmp.S to wakeup the secondary core */
......
......@@ -13,7 +13,7 @@
#include <linux/io.h>
#include <linux/platform_data/arm-ux500-pm.h>
#include <mach/hardware.h>
#include "db8500-regs.h"
/* ARM WFI Standby signal register */
#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
......
......@@ -14,9 +14,9 @@
#include <asm/smp_twd.h>
#include <mach/setup.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "db8500-regs.h"
#include "id.h"
#ifdef CONFIG_HAVE_ARM_TWD
......
......@@ -10,7 +10,7 @@
#include <linux/platform_data/usb-musb-ux500.h>
#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/hardware.h>
#include "db8500-regs.h"
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
......
......@@ -13,7 +13,6 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/types.h>
#include <mach/hardware.h>
#include "clk.h"
......
......@@ -18,7 +18,6 @@
#include <asm/sched_clock.h>
#include <mach/setup.h>
#include <mach/hardware.h>
#define RATE_32K 32768
......
......@@ -12,8 +12,6 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <mach/hardware.h>
#include "cryp_p.h"
#include "cryp.h"
......
......@@ -32,7 +32,6 @@
#include <crypto/scatterwalk.h>
#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include "cryp_p.h"
#include "cryp.h"
......
......@@ -32,7 +32,6 @@
#include <crypto/algapi.h>
#include <linux/platform_data/crypto-ux500.h>
#include <mach/hardware.h>
#include "hash_alg.h"
......
......@@ -17,8 +17,6 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <mach/hardware.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/pcm.h>
......
......@@ -21,8 +21,6 @@
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/asoc-ux500-msp.h>
#include <mach/hardware.h>
#include <sound/soc.h>
#include <sound/soc-dai.h>
......
......@@ -22,8 +22,6 @@
#include <linux/of.h>
#include <linux/platform_data/asoc-ux500-msp.h>
#include <mach/hardware.h>
#include <sound/soc.h>
#include "ux500_msp_i2s.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment