Commit 1777ddb8 authored by Ondrej Zary's avatar Ondrej Zary Committed by David S. Miller

dl2k: Implement suspend

Add suspend/resume support to dl2k driver.
This requires RX/TX rings to be reset so split out the required
functionality from alloc_list() into new rio_reset_ring().

Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000).
Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 966e07f4
......@@ -464,36 +464,40 @@ static void free_list(struct net_device *dev)
}
}
static void rio_reset_ring(struct netdev_private *np)
{
int i;
np->cur_rx = 0;
np->cur_tx = 0;
np->old_rx = 0;
np->old_tx = 0;
for (i = 0; i < TX_RING_SIZE; i++)
np->tx_ring[i].status = cpu_to_le64(TFDDone);
for (i = 0; i < RX_RING_SIZE; i++)
np->rx_ring[i].status = 0;
}
/* allocate and initialize Tx and Rx descriptors */
static int alloc_list(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
int i;
np->cur_rx = np->cur_tx = 0;
np->old_rx = np->old_tx = 0;
rio_reset_ring(np);
np->rx_buf_sz = (dev->mtu <= 1500 ? PACKET_SIZE : dev->mtu + 32);
/* Initialize Tx descriptors, TFDListPtr leaves in start_xmit(). */
for (i = 0; i < TX_RING_SIZE; i++) {
np->tx_skbuff[i] = NULL;
np->tx_ring[i].status = cpu_to_le64(TFDDone);
np->tx_ring[i].next_desc = cpu_to_le64(np->tx_ring_dma +
((i + 1) % TX_RING_SIZE) *
sizeof(struct netdev_desc));
}
/* Initialize Rx descriptors */
for (i = 0; i < RX_RING_SIZE; i++) {
np->rx_ring[i].next_desc = cpu_to_le64(np->rx_ring_dma +
((i + 1) % RX_RING_SIZE) *
sizeof(struct netdev_desc));
np->rx_ring[i].status = 0;
np->rx_ring[i].fraginfo = 0;
np->rx_skbuff[i] = NULL;
}
/* Allocate the rx buffers */
/* Initialize Rx descriptors & allocate buffers */
for (i = 0; i < RX_RING_SIZE; i++) {
/* Allocated fixed size of skbuff */
struct sk_buff *skb;
......@@ -505,6 +509,9 @@ static int alloc_list(struct net_device *dev)
return -ENOMEM;
}
np->rx_ring[i].next_desc = cpu_to_le64(np->rx_ring_dma +
((i + 1) % RX_RING_SIZE) *
sizeof(struct netdev_desc));
/* Rubicon now supports 40 bits of addressing space. */
np->rx_ring[i].fraginfo =
cpu_to_le64(pci_map_single(
......@@ -1824,11 +1831,55 @@ rio_remove1 (struct pci_dev *pdev)
}
}
#ifdef CONFIG_PM_SLEEP
static int rio_suspend(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
struct netdev_private *np = netdev_priv(dev);
if (!netif_running(dev))
return 0;
netif_device_detach(dev);
del_timer_sync(&np->timer);
rio_hw_stop(dev);
return 0;
}
static int rio_resume(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
struct netdev_private *np = netdev_priv(dev);
if (!netif_running(dev))
return 0;
rio_reset_ring(np);
rio_hw_init(dev);
np->timer.expires = jiffies + 1 * HZ;
add_timer(&np->timer);
netif_device_attach(dev);
dl2k_enable_int(np);
return 0;
}
static SIMPLE_DEV_PM_OPS(rio_pm_ops, rio_suspend, rio_resume);
#define RIO_PM_OPS (&rio_pm_ops)
#else
#define RIO_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
static struct pci_driver rio_driver = {
.name = "dl2k",
.id_table = rio_pci_tbl,
.probe = rio_probe1,
.remove = rio_remove1,
.driver.pm = RIO_PM_OPS,
};
module_pci_driver(rio_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment