Commit 17ce039b authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

[media] cxusb: don't do DMA on stack

The USB control messages require DMA to work. We cannot pass
a stack-allocated buffer, as it is not warranted that the
stack would be into a DMA enabled area.
Reviewed-by: default avatarPatrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 0d43c0ff
......@@ -45,9 +45,6 @@
#include "si2168.h"
#include "si2157.h"
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 80
/* debug */
static int dvb_usb_cxusb_debug;
module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
......@@ -61,23 +58,27 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
static int cxusb_ctrl_msg(struct dvb_usb_device *d,
u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
{
int wo = (rbuf == NULL || rlen == 0); /* write-only */
u8 sndbuf[MAX_XFER_SIZE];
struct cxusb_state *st = d->priv;
int ret, wo;
if (1 + wlen > sizeof(sndbuf)) {
warn("i2c wr: len=%d is too big!\n",
wlen);
if (1 + wlen > MAX_XFER_SIZE) {
warn("i2c wr: len=%d is too big!\n", wlen);
return -EOPNOTSUPP;
}
memset(sndbuf, 0, 1+wlen);
wo = (rbuf == NULL || rlen == 0); /* write-only */
sndbuf[0] = cmd;
memcpy(&sndbuf[1], wbuf, wlen);
mutex_lock(&st->data_mutex);
st->data[0] = cmd;
memcpy(&st->data[1], wbuf, wlen);
if (wo)
return dvb_usb_generic_write(d, sndbuf, 1+wlen);
ret = dvb_usb_generic_write(d, st->data, 1 + wlen);
else
return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
ret = dvb_usb_generic_rw(d, st->data, 1 + wlen,
rbuf, rlen, 0);
mutex_unlock(&st->data_mutex);
return ret;
}
/* GPIO */
......@@ -1460,36 +1461,43 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties;
static int cxusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dvb_usb_device *d;
struct cxusb_state *st;
if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf,
&cxusb_bluebird_nano2_needsfirmware_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf,
&cxusb_bluebird_dualdig4_rev2_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
THIS_MODULE, NULL, adapter_nr) ||
THIS_MODULE, &d, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties,
THIS_MODULE, NULL, adapter_nr) ||
0)
THIS_MODULE, &d, adapter_nr) ||
0) {
st = d->priv;
mutex_init(&st->data_mutex);
return 0;
}
return -EINVAL;
}
......
......@@ -28,10 +28,16 @@
#define CMD_ANALOG 0x50
#define CMD_DIGITAL 0x51
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 80
struct cxusb_state {
u8 gpio_write_state[3];
struct i2c_client *i2c_client_demod;
struct i2c_client *i2c_client_tuner;
unsigned char data[MAX_XFER_SIZE];
struct mutex data_mutex;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment