timers, sched/clock: Avoid deadlock during read from NMI

Currently it is possible for an NMI (or FIQ on ARM) to come in
and read sched_clock() whilst update_sched_clock() has locked
the seqcount for writing. This results in the NMI handler
locking up when it calls raw_read_seqcount_begin().

This patch fixes the NMI safety issues by providing banked clock
data. This is a similar approach to the one used in Thomas
Gleixner's 4396e058("timekeeping: Provide fast and NMI safe
access to CLOCK_MONOTONIC").
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1427397806-20889-6-git-send-email-john.stultz@linaro.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

kernel/time/sched_clock.c

@@ -47,19 +47,20 @@ struct clock_read_data {
  * struct clock_data - all data needed for sched_clock (including
  *                     registration of a new clock source)
  *
- * @seq:		Sequence counter for protecting updates.
+ * @seq:		Sequence counter for protecting updates. The lowest
+ *			bit is the index for @read_data.
  * @read_data:		Data required to read from sched_clock.
  * @wrap_kt:		Duration for which clock can run before wrapping
  * @rate:		Tick rate of the registered clock
  * @actual_read_sched_clock: Registered clock read function
  *
  * The ordering of this structure has been chosen to optimize cache
- * performance. In particular seq and read_data (combined) should fit
+ * performance. In particular seq and read_data[0] (combined) should fit
  * into a single 64 byte cache line.
  */
 struct clock_data {
 	seqcount_t seq;
-	struct clock_read_data read_data;
+	struct clock_read_data read_data[2];
 	ktime_t wrap_kt;
 	unsigned long rate;
 	u64 (*actual_read_sched_clock)(void);
@@ -80,10 +81,9 @@ static u64 notrace jiffy_sched_clock_read(void)
 }
 
 static struct clock_data cd ____cacheline_aligned = {
-	.read_data = { .mult = NSEC_PER_SEC / HZ,
-		       .read_sched_clock = jiffy_sched_clock_read, },
+	.read_data[0] = { .mult = NSEC_PER_SEC / HZ,
+			  .read_sched_clock = jiffy_sched_clock_read, },
 	.actual_read_sched_clock = jiffy_sched_clock_read,
-
 };
 
 static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
@@ -95,10 +95,11 @@ unsigned long long notrace sched_clock(void)
 {
 	u64 cyc, res;
 	unsigned long seq;
-	struct clock_read_data *rd = &cd.read_data;
+	struct clock_read_data *rd;
 
 	do {
-		seq = raw_read_seqcount_begin(&cd.seq);
+		seq = raw_read_seqcount(&cd.seq);
+		rd = cd.read_data + (seq & 1);
 
 		cyc = (rd->read_sched_clock() - rd->epoch_cyc) &
 		      rd->sched_clock_mask;
@@ -108,27 +109,51 @@ unsigned long long notrace sched_clock(void)
 	return res;
 }
 
+/*
+ * Updating the data required to read the clock.
+ *
+ * sched_clock will never observe mis-matched data even if called from
+ * an NMI. We do this by maintaining an odd/even copy of the data and
+ * steering sched_clock to one or the other using a sequence counter.
+ * In order to preserve the data cache profile of sched_clock as much
+ * as possible the system reverts back to the even copy when the update
+ * completes; the odd copy is used *only* during an update.
+ */
+static void update_clock_read_data(struct clock_read_data *rd)
+{
+	/* update the backup (odd) copy with the new data */
+	cd.read_data[1] = *rd;
+
+	/* steer readers towards the odd copy */
+	raw_write_seqcount_latch(&cd.seq);
+
+	/* now its safe for us to update the normal (even) copy */
+	cd.read_data[0] = *rd;
+
+	/* switch readers back to the even copy */
+	raw_write_seqcount_latch(&cd.seq);
+}
+
 /*
  * Atomically update the sched_clock epoch.
  */
 static void update_sched_clock(void)
 {
-	unsigned long flags;
 	u64 cyc;
 	u64 ns;
-	struct clock_read_data *rd = &cd.read_data;
+	struct clock_read_data rd;
+
+	rd = cd.read_data[0];
 
 	cyc = cd.actual_read_sched_clock();
-	ns = rd->epoch_ns +
-	     cyc_to_ns((cyc - rd->epoch_cyc) & rd->sched_clock_mask,
-		       rd->mult, rd->shift);
-
-	raw_local_irq_save(flags);
-	raw_write_seqcount_begin(&cd.seq);
-	rd->epoch_ns = ns;
-	rd->epoch_cyc = cyc;
-	raw_write_seqcount_end(&cd.seq);
-	raw_local_irq_restore(flags);
+	ns = rd.epoch_ns +
+	     cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask,
+		       rd.mult, rd.shift);
+
+	rd.epoch_ns = ns;
+	rd.epoch_cyc = cyc;
+
+	update_clock_read_data(&rd);
 }
 
 static enum hrtimer_restart sched_clock_poll(struct hrtimer *hrt)
@@ -145,7 +170,7 @@ void __init sched_clock_register(u64 (*read)(void), int bits,
 	u32 new_mult, new_shift;
 	unsigned long r;
 	char r_unit;
-	struct clock_read_data *rd = &cd.read_data;
+	struct clock_read_data rd;
 
 	if (cd.rate > rate)
 		return;
@@ -162,22 +187,23 @@ void __init sched_clock_register(u64 (*read)(void), int bits,
 	wrap = clocks_calc_max_nsecs(new_mult, new_shift, 0, new_mask, NULL);
 	cd.wrap_kt = ns_to_ktime(wrap);
 
+	rd = cd.read_data[0];
+
 	/* update epoch for new counter and update epoch_ns from old counter*/
 	new_epoch = read();
 	cyc = cd.actual_read_sched_clock();
-	ns = rd->epoch_ns +
-	     cyc_to_ns((cyc - rd->epoch_cyc) & rd->sched_clock_mask,
-		       rd->mult, rd->shift);
+	ns = rd.epoch_ns +
+	     cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask,
+		       rd.mult, rd.shift);
 	cd.actual_read_sched_clock = read;
 
-	raw_write_seqcount_begin(&cd.seq);
-	rd->read_sched_clock = read;
-	rd->sched_clock_mask = new_mask;
-	rd->mult = new_mult;
-	rd->shift = new_shift;
-	rd->epoch_cyc = new_epoch;
-	rd->epoch_ns = ns;
-	raw_write_seqcount_end(&cd.seq);
+	rd.read_sched_clock = read;
+	rd.sched_clock_mask = new_mask;
+	rd.mult = new_mult;
+	rd.shift = new_shift;
+	rd.epoch_cyc = new_epoch;
+	rd.epoch_ns = ns;
+	update_clock_read_data(&rd);
 
 	r = rate;
 	if (r >= 4000000) {
@@ -227,15 +253,22 @@ void __init sched_clock_postinit(void)
  *
  * This function makes it appear to sched_clock() as if the clock
  * stopped counting at its last update.
+ *
+ * This function must only be called from the critical
+ * section in sched_clock(). It relies on the read_seqcount_retry()
+ * at the end of the critical section to be sure we observe the
+ * correct copy of epoch_cyc.
  */
 static u64 notrace suspended_sched_clock_read(void)
 {
-	return cd.read_data.epoch_cyc;
+	unsigned long seq = raw_read_seqcount(&cd.seq);
+
+	return cd.read_data[seq & 1].epoch_cyc;
 }
 
 static int sched_clock_suspend(void)
 {
-	struct clock_read_data *rd = &cd.read_data;
+	struct clock_read_data *rd = &cd.read_data[0];
 
 	update_sched_clock();
 	hrtimer_cancel(&sched_clock_timer);
@@ -245,7 +278,7 @@ static int sched_clock_suspend(void)
 
 static void sched_clock_resume(void)
 {
-	struct clock_read_data *rd = &cd.read_data;
+	struct clock_read_data *rd = &cd.read_data[0];
 
 	rd->epoch_cyc = cd.actual_read_sched_clock();
 	hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL);