Commit 184123db authored by Al Viro's avatar Al Viro Committed by Linus Torvalds

[PATCH] pc300too annotation fixes

Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 68f50e52
......@@ -101,8 +101,8 @@ typedef struct port_s {
typedef struct card_s {
int type; /* RSV, X21, etc. */
int n_ports; /* 1 or 2 ports */
u8* __iomem rambase; /* buffer memory base (virtual) */
u8* __iomem scabase; /* SCA memory base (virtual) */
u8 __iomem *rambase; /* buffer memory base (virtual) */
u8 __iomem *scabase; /* SCA memory base (virtual) */
plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
u32 init_ctrl_value; /* Saved value - 9050 bug workaround */
u16 rx_ring_buffers; /* number of buffers in a ring */
......@@ -134,7 +134,7 @@ typedef struct card_s {
static void pc300_set_iface(port_t *port)
{
card_t *card = port->card;
u32* init_ctrl = &card->plxbase->init_ctrl;
u32 __iomem * init_ctrl = &card->plxbase->init_ctrl;
u16 msci = get_msci(port);
u8 rxs = port->rxs & CLK_BRG_MASK;
u8 txs = port->txs & CLK_BRG_MASK;
......@@ -393,7 +393,7 @@ static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
/* PLX PCI 9050 workaround for local configuration register read bug */
pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
card->init_ctrl_value = readl(&((plx9050*)card->scabase)->init_ctrl);
card->init_ctrl_value = readl(&((plx9050 __iomem *)card->scabase)->init_ctrl);
pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
/* Reset PLX */
......@@ -519,10 +519,10 @@ static struct pci_device_id pc300_pci_tbl[] __devinitdata = {
static struct pci_driver pc300_pci_driver = {
name: "PC300",
id_table: pc300_pci_tbl,
probe: pc300_pci_init_one,
remove: pc300_pci_remove_one,
.name = "PC300",
.id_table = pc300_pci_tbl,
.probe = pc300_pci_init_one,
.remove = pc300_pci_remove_one,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment