drm/i915: Fix port_clock and adjusted_mode.clock readout all over

Now that adjusted_mode.clock no longer contains the pixel_multiplier, we
can kill the get_clock() callback and instead do the clock readout
in get_pipe_config().

Also i9xx_crtc_clock_get() can now extract the frequency of the PCH
DPLL, so use it to populate port_clock accurately for PCH encoders.
For DP in port A the encoder is still responsible for filling in
port_clock. The FDI adjusted_mode.clock extraction is kept in place
for some extra sanity checking, but we no longer need to pretend it's
also the port_clock.

In the encoder get_config() functions fill out adjusted_mode.clock
based on port_clock and other details such as the DP M/N values,
HDMI 12bpc and SDVO pixel_multiplier. For PCH encoders we will then
do an extra sanity check to make sure the dotclock we derived from
the FDI configuratiuon matches the one we derive from port_clock.

DVO doesn't exist on PCH platforms, so it doesn't need to anything
but assign adjusted_mode.clock=port_clock. And DDI is HSW only, so
none of the changes apply there.

v2: Use hdmi_reg color format to detect 12bpc HDMI case
v3: Set adjusted_mode.clock for LVDS too
v4: Rename ironlake_crtc_clock_get to ironlake_pch_clock_get,
    eliminate the useless link_freq variable.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -371,7 +371,6 @@ struct drm_i915_display_funcs {
 	 * fills out the pipe-config with the hw state. */
 	bool (*get_pipe_config)(struct intel_crtc *,
 				struct intel_crtc_config *);
-	void (*get_clock)(struct intel_crtc *, struct intel_crtc_config *);
 	int (*crtc_mode_set)(struct drm_crtc *crtc,
 			     int x, int y,
 			     struct drm_framebuffer *old_fb);

drivers/gpu/drm/i915/i915_reg.h

@@ -2071,6 +2071,7 @@
 
 /* Gen 4 SDVO/HDMI bits: */
 #define   SDVO_COLOR_FORMAT_8bpc		(0 << 26)
+#define   SDVO_COLOR_FORMAT_MASK		(7 << 26)
 #define   SDVO_ENCODING_SDVO			(0 << 10)
 #define   SDVO_ENCODING_HDMI			(2 << 10)
 #define   HDMI_MODE_SELECT_HDMI			(1 << 9) /* HDMI only */

drivers/gpu/drm/i915/intel_crt.c

@@ -89,6 +89,7 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
 	u32 tmp, flags = 0;
+	int dotclock;
 
 	tmp = I915_READ(crt->adpa_reg);
 
@@ -103,6 +104,13 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	dotclock = pipe_config->port_clock;
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
+
+	pipe_config->adjusted_mode.clock = dotclock;
 }
 
 /* Note: The caller is required to filter out dpms modes not supported by the

drivers/gpu/drm/i915/intel_display.c

@@ -47,8 +47,8 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
 
 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 				struct intel_crtc_config *pipe_config);
-static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
-				    struct intel_crtc_config *pipe_config);
+static void ironlake_pch_clock_get(struct intel_crtc *crtc,
+				   struct intel_crtc_config *pipe_config);
 
 static int intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode,
 			  int x, int y, struct drm_framebuffer *old_fb);
@@ -5068,6 +5068,8 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 						     DPLL_PORTB_READY_MASK);
 	}
 
+	i9xx_crtc_clock_get(crtc, pipe_config);
+
 	return true;
 }
 
@@ -6026,6 +6028,8 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 		pipe_config->pixel_multiplier =
 			((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
 			 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
+
+		ironlake_pch_clock_get(crtc, pipe_config);
 	} else {
 		pipe_config->pixel_multiplier = 1;
 	}
@@ -7433,7 +7437,12 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
 		i9xx_clock(refclk, &clock);
 	}
 
-	pipe_config->adjusted_mode.clock = clock.dot;
+	/*
+	 * This value includes pixel_multiplier. We will use
+	 * port_clock to compute adjusted_mode.clock in the
+	 * encoder's get_config() function.
+	 */
+	pipe_config->port_clock = clock.dot;
 }
 
 int intel_dotclock_calculate(int link_freq,
@@ -7455,31 +7464,23 @@ int intel_dotclock_calculate(int link_freq,
 	return div_u64((u64)m_n->link_m * link_freq, m_n->link_n);
 }
 
-static void ironlake_crtc_clock_get(struct intel_crtc *crtc,
-				    struct intel_crtc_config *pipe_config)
+static void ironlake_pch_clock_get(struct intel_crtc *crtc,
+				   struct intel_crtc_config *pipe_config)
 {
 	struct drm_device *dev = crtc->base.dev;
-	int link_freq;
+
+	/* read out port_clock from the DPLL */
+	i9xx_crtc_clock_get(crtc, pipe_config);
 
 	/*
-	 * We need to get the FDI or DP link clock here to derive
-	 * the M/N dividers.
-	 *
-	 * For FDI, we read it from the BIOS or use a fixed 2.7GHz.
-	 * For DP, it's either 1.62GHz or 2.7GHz.
-	 * We do our calculations in 10*MHz since we don't need much precison.
+	 * This value does not include pixel_multiplier.
+	 * We will check that port_clock and adjusted_mode.clock
+	 * agree once we know their relationship in the encoder's
+	 * get_config() function.
 	 */
-	if (pipe_config->has_pch_encoder) {
-		link_freq = intel_fdi_link_freq(dev) * 10000;
-
-		pipe_config->adjusted_mode.clock =
-			intel_dotclock_calculate(link_freq, &pipe_config->fdi_m_n);
-	} else {
-		link_freq = pipe_config->port_clock;
-
-		pipe_config->adjusted_mode.clock =
-			intel_dotclock_calculate(link_freq, &pipe_config->dp_m_n);
-	}
+	pipe_config->adjusted_mode.clock =
+		intel_dotclock_calculate(intel_fdi_link_freq(dev) * 10000,
+					 &pipe_config->fdi_m_n);
 }
 
 /** Returns the currently programmed mode of the given pipe. */
@@ -8895,9 +8896,6 @@ check_crtc_state(struct drm_device *dev)
 				encoder->get_config(encoder, &pipe_config);
 		}
 
-		if (dev_priv->display.get_clock)
-			dev_priv->display.get_clock(crtc, &pipe_config);
-
 		WARN(crtc->active != active,
 		     "crtc active state doesn't match with hw state "
 		     "(expected %i, found %i)\n", crtc->active, active);
@@ -8972,6 +8970,18 @@ intel_modeset_check_state(struct drm_device *dev)
 	check_shared_dpll_state(dev);
 }
 
+void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
+				     int dotclock)
+{
+	/*
+	 * FDI already provided one idea for the dotclock.
+	 * Yell if the encoder disagrees.
+	 */
+	WARN(!intel_fuzzy_clock_check(pipe_config->adjusted_mode.clock, dotclock),
+	     "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
+	     pipe_config->adjusted_mode.clock, dotclock);
+}
+
 static int __intel_set_mode(struct drm_crtc *crtc,
 			    struct drm_display_mode *mode,
 			    int x, int y, struct drm_framebuffer *fb)
@@ -9923,7 +9933,6 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.update_plane = ironlake_update_plane;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
-		dev_priv->display.get_clock = ironlake_crtc_clock_get;
 		dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
 		dev_priv->display.crtc_enable = ironlake_crtc_enable;
 		dev_priv->display.crtc_disable = ironlake_crtc_disable;
@@ -9931,7 +9940,6 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.update_plane = ironlake_update_plane;
 	} else if (IS_VALLEYVIEW(dev)) {
 		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_clock = i9xx_crtc_clock_get;
 		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
 		dev_priv->display.crtc_enable = valleyview_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
@@ -9939,7 +9947,6 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.update_plane = i9xx_update_plane;
 	} else {
 		dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
-		dev_priv->display.get_clock = i9xx_crtc_clock_get;
 		dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
 		dev_priv->display.crtc_enable = i9xx_crtc_enable;
 		dev_priv->display.crtc_disable = i9xx_crtc_disable;
@@ -10553,15 +10560,6 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 			      pipe);
 	}
 
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list,
-			    base.head) {
-		if (!crtc->active)
-			continue;
-		if (dev_priv->display.get_clock)
-			dev_priv->display.get_clock(crtc,
-						    &crtc->config);
-	}
-
 	list_for_each_entry(connector, &dev->mode_config.connector_list,
 			    base.head) {
 		if (connector->get_hw_state(connector)) {

drivers/gpu/drm/i915/intel_dp.c

@@ -1417,6 +1417,7 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = dp_to_dig_port(intel_dp)->port;
 	struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
+	int dotclock;
 
 	if ((port == PORT_A) || !HAS_PCH_CPT(dev)) {
 		tmp = I915_READ(intel_dp->output_reg);
@@ -1448,12 +1449,20 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 
 	intel_dp_get_m_n(crtc, pipe_config);
 
-	if (dp_to_dig_port(intel_dp)->port == PORT_A) {
+	if (port == PORT_A) {
 		if ((I915_READ(DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_160MHZ)
 			pipe_config->port_clock = 162000;
 		else
 			pipe_config->port_clock = 270000;
 	}
+
+	dotclock = intel_dotclock_calculate(pipe_config->port_clock,
+					    &pipe_config->dp_m_n);
+
+	if (HAS_PCH_SPLIT(dev_priv->dev) && port != PORT_A)
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
+
+	pipe_config->adjusted_mode.clock = dotclock;
 }
 
 static bool is_edp_psr(struct intel_dp *intel_dp)

drivers/gpu/drm/i915/intel_drv.h

@@ -805,5 +805,7 @@ extern void intel_dp_get_m_n(struct intel_crtc *crtc,
 			     struct intel_crtc_config *pipe_config);
 extern int intel_dotclock_calculate(int link_freq,
 				    const struct intel_link_m_n *m_n);
+extern void ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
+					    int dotclock);
 
 #endif /* __INTEL_DRV_H__ */

drivers/gpu/drm/i915/intel_dvo.c

@@ -153,6 +153,8 @@ static void intel_dvo_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	pipe_config->adjusted_mode.clock = pipe_config->port_clock;
 }
 
 static void intel_disable_dvo(struct intel_encoder *encoder)

drivers/gpu/drm/i915/intel_hdmi.c

@@ -713,6 +713,7 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder,
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base);
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	u32 tmp, flags = 0;
+	int dotclock;
 
 	tmp = I915_READ(intel_hdmi->hdmi_reg);
 
@@ -727,6 +728,16 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	if ((tmp & SDVO_COLOR_FORMAT_MASK) == HDMI_COLOR_FORMAT_12bpc)
+		dotclock = pipe_config->port_clock * 2 / 3;
+	else
+		dotclock = pipe_config->port_clock;
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
+
+	pipe_config->adjusted_mode.clock = dotclock;
 }
 
 static void intel_enable_hdmi(struct intel_encoder *encoder)

drivers/gpu/drm/i915/intel_lvds.c

@@ -92,6 +92,7 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 lvds_reg, tmp, flags = 0;
+	int dotclock;
 
 	if (HAS_PCH_SPLIT(dev))
 		lvds_reg = PCH_LVDS;
@@ -116,6 +117,13 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
 
 		pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE;
 	}
+
+	dotclock = pipe_config->port_clock;
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
+
+	pipe_config->adjusted_mode.clock = dotclock;
 }
 
 /* The LVDS pin pair needs to be on before the DPLLs are enabled.

drivers/gpu/drm/i915/intel_sdvo.c

@@ -1316,6 +1316,7 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 	struct intel_sdvo *intel_sdvo = to_sdvo(encoder);
 	struct intel_sdvo_dtd dtd;
 	int encoder_pixel_multiplier = 0;
+	int dotclock;
 	u32 flags = 0, sdvox;
 	u8 val;
 	bool ret;
@@ -1354,6 +1355,13 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 			 >> SDVO_PORT_MULTIPLY_SHIFT) + 1;
 	}
 
+	dotclock = pipe_config->port_clock / pipe_config->pixel_multiplier;
+
+	if (HAS_PCH_SPLIT(dev))
+		ironlake_check_encoder_dotclock(pipe_config, dotclock);
+
+	pipe_config->adjusted_mode.clock = dotclock;
+
 	/* Cross check the port pixel multiplier with the sdvo encoder state. */
 	if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT,
 				 &val, 1)) {