ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs

Add compatible values to Ethernet PHY subnodes representing Micrel
KSZ8041 PHYs on RZ/G1 and R-Car Gen2 boards.  This allows software to
identify the PHY model at any time, regardless of the state of the PHY
reset line.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/f9e26625924f90eff34fe6f6f02b15fa272c5d80.1631174218.git.geert+renesas@glider.be

arch/arm/boot/dts/r8a7743-sk-rzg1m.dts

@@ -69,6 +69,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7745-sk-rzg1e.dts

@@ -64,6 +64,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7790-lager.dts

@@ -678,6 +678,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7790-stout.dts

@@ -199,6 +199,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -637,6 +637,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7791-porter.dts

@@ -302,6 +302,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7793-gose.dts

@@ -595,6 +595,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7794-alt.dts

@@ -383,6 +383,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;

arch/arm/boot/dts/r8a7794-silk.dts

@@ -397,6 +397,8 @@ &ether {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0022.1537",
+			     "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&irqc0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;