Commit 185e98b3 authored by Maxime Ripard's avatar Maxime Ripard Committed by Maarten Lankhorst

drm/vc4: hdmi: Support BCM2711 CEC interrupt setup

The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.

Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Reviewed-by: default avatarDave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111142309.193441-11-maxime@cerno.tech
(cherry picked from commit ad6380e9)
Signed-off-by: default avatarMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
parent ed4a6bbd
......@@ -1606,9 +1606,11 @@ static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
((3600 / usecs) << VC4_HDMI_CEC_CNT_TO_3600_US_SHIFT) |
((3500 / usecs) << VC4_HDMI_CEC_CNT_TO_3500_US_SHIFT));
HDMI_WRITE(HDMI_CEC_CPU_MASK_CLEAR, VC4_HDMI_CPU_CEC);
if (!vc4_hdmi->variant->external_irq_controller)
HDMI_WRITE(HDMI_CEC_CPU_MASK_CLEAR, VC4_HDMI_CPU_CEC);
} else {
HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
if (!vc4_hdmi->variant->external_irq_controller)
HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
}
......@@ -1683,8 +1685,6 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector);
cec_s_conn_info(vc4_hdmi->cec_adap, &conn_info);
HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
value = HDMI_READ(HDMI_CEC_CNTRL_1);
/* Set the logical address to Unregistered */
value |= VC4_HDMI_CEC_ADDR_MASK;
......@@ -1692,12 +1692,32 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
vc4_hdmi_cec_update_clk_div(vc4_hdmi);
ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
vc4_cec_irq_handler,
vc4_cec_irq_handler_thread, 0,
"vc4 hdmi cec", vc4_hdmi);
if (ret)
goto err_delete_cec_adap;
if (vc4_hdmi->variant->external_irq_controller) {
ret = devm_request_threaded_irq(&pdev->dev,
platform_get_irq_byname(pdev, "cec-rx"),
vc4_cec_irq_handler_rx_bare,
vc4_cec_irq_handler_rx_thread, 0,
"vc4 hdmi cec rx", vc4_hdmi);
if (ret)
goto err_delete_cec_adap;
ret = devm_request_threaded_irq(&pdev->dev,
platform_get_irq_byname(pdev, "cec-tx"),
vc4_cec_irq_handler_tx_bare,
vc4_cec_irq_handler_tx_thread, 0,
"vc4 hdmi cec tx", vc4_hdmi);
if (ret)
goto err_delete_cec_adap;
} else {
HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
vc4_cec_irq_handler,
vc4_cec_irq_handler_thread, 0,
"vc4 hdmi cec", vc4_hdmi);
if (ret)
goto err_delete_cec_adap;
}
ret = cec_register_adapter(vc4_hdmi->cec_adap, &pdev->dev);
if (ret < 0)
......@@ -2096,6 +2116,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = {
PHY_LANE_CK,
},
.unsupported_odd_h_timings = true,
.external_irq_controller = true,
.init_resources = vc5_hdmi_init_resources,
.csc_setup = vc5_hdmi_csc_setup,
......@@ -2122,6 +2143,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = {
PHY_LANE_2,
},
.unsupported_odd_h_timings = true,
.external_irq_controller = true,
.init_resources = vc5_hdmi_init_resources,
.csc_setup = vc5_hdmi_csc_setup,
......
......@@ -64,6 +64,13 @@ struct vc4_hdmi_variant {
/* The BCM2711 cannot deal with odd horizontal pixel timings */
bool unsupported_odd_h_timings;
/*
* The BCM2711 CEC/hotplug IRQ controller is shared between the
* two HDMI controllers, and we have a proper irqchip driver for
* it.
*/
bool external_irq_controller;
/* Callback to get the resources (memory region, interrupts,
* clocks, etc) for that variant.
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment