[media] media: i2c: adv7343: add OF support

add OF support for the adv7343 driver.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Documentation/devicetree/bindings/media/i2c/adv7343.txt

+* Analog Devices adv7343 video encoder
+
+The ADV7343 are high speed, digital-to-analog video encoders in a 64-lead LQFP
+package. Six high speed, 3.3 V, 11-bit video DACs provide support for composite
+(CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard
+definition (SD), enhanced definition (ED), or high definition (HD) video
+formats.
+
+Required Properties :
+- compatible: Must be "adi,adv7343"
+
+Optional Properties :
+- adi,power-mode-sleep-mode: on enable the current consumption is reduced to
+			      micro ampere level. All DACs and the internal PLL
+			      circuit are disabled.
+- adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
+			   internal PLL 1 circuit to be powered down and the
+			   oversampling to be switched off.
+- ad,adv7343-power-mode-dac: array configuring the power on/off DAC's 1..6,
+			      0 = OFF and 1 = ON, Default value when this
+			      property is not specified is <0 0 0 0 0 0>.
+- ad,adv7343-sd-config-dac-out: array configure SD DAC Output's 1 and 2, 0 = OFF
+				 and 1 = ON, Default value when this property is
+				 not specified is <0 0>.
+
+Example:
+
+i2c0@1c22000 {
+	...
+	...
+
+	adv7343@2a {
+		compatible = "adi,adv7343";
+		reg = <0x2a>;
+
+		port {
+			adv7343_1: endpoint {
+					adi,power-mode-sleep-mode;
+					adi,power-mode-pll-ctrl;
+					/* Use DAC1..3, DAC6 */
+					adi,dac-enable = <1 1 1 0 0 1>;
+					/* Use SD DAC output 1 */
+					adi,sd-dac-enable = <1 0>;
+			};
+		};
+	};
+	...
+};

drivers/media/i2c/adv7343.c

@@ -30,6 +30,7 @@
 #include <media/v4l2-async.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
 
 #include "adv7343_regs.h"
 
@@ -399,6 +400,40 @@ static int adv7343_initialize(struct v4l2_subdev *sd)
 	return err;
 }
 
+static struct adv7343_platform_data *
+adv7343_get_pdata(struct i2c_client *client)
+{
+	struct adv7343_platform_data *pdata;
+	struct device_node *np;
+
+	if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+		return client->dev.platform_data;
+
+	np = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+	if (!np)
+		return NULL;
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto done;
+
+	pdata->mode_config.sleep_mode =
+			of_property_read_bool(np, "adi,power-mode-sleep-mode");
+
+	pdata->mode_config.pll_control =
+			of_property_read_bool(np, "adi,power-mode-pll-ctrl");
+
+	of_property_read_u32_array(np, "adi,dac-enable",
+				   pdata->mode_config.dac, 6);
+
+	of_property_read_u32_array(np, "adi,sd-dac-enable",
+				   pdata->sd_config.sd_dac_out, 2);
+
+done:
+	of_node_put(np);
+	return pdata;
+}
+
 static int adv7343_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
@@ -417,7 +452,7 @@ static int adv7343_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	/* Copy board specific information here */
-	state->pdata = client->dev.platform_data;
+	state->pdata = adv7343_get_pdata(client);
 
 	state->reg00	= 0x80;
 	state->reg01	= 0x00;
@@ -483,8 +518,17 @@ static const struct i2c_device_id adv7343_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, adv7343_id);
 
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id adv7343_of_match[] = {
+	{.compatible = "adi,adv7343", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, adv7343_of_match);
+#endif
+
 static struct i2c_driver adv7343_driver = {
 	.driver = {
+		.of_match_table = of_match_ptr(adv7343_of_match),
 		.owner	= THIS_MODULE,
 		.name	= "adv7343",
 	},