Commit 1887023a authored by Robert Hancock's avatar Robert Hancock Committed by Jakub Kicinski

net: phy: marvell: add special handling of Finisar modules with 88E1111

The Finisar FCLF8520P2BTL 1000BaseT SFP module uses a Marvel 88E1111 PHY
with a modified PHY ID. Add support for this ID using the 88E1111
methods.

By default these modules do not have 1000BaseX auto-negotiation enabled,
which is not generally desirable with Linux networking drivers. Add
handling to enable 1000BaseX auto-negotiation when these modules are
used in 1000BaseX mode. Also, some special handling is required to ensure
that 1000BaseT auto-negotiation is enabled properly when desired.

Based on existing handling in the AMD xgbe driver and the information in
the Finisar FAQ:
https://www.finisar.com/sites/default/files/resources/an-2036_1000base-t_sfp_faqreve1.pdfSigned-off-by: default avatarRobert Hancock <robert.hancock@calian.com>
Reviewed-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20201028171540.1700032-1-robert.hancock@calian.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent be25f43a
...@@ -80,8 +80,11 @@ ...@@ -80,8 +80,11 @@
#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3 #define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4 #define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1111_HWCFG_MODE_RTBI 0x7 #define MII_M1111_HWCFG_MODE_RTBI 0x7
#define MII_M1111_HWCFG_MODE_COPPER_1000X_AN 0x8
#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9 #define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb #define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
#define MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN 0xc
#define MII_M1111_HWCFG_SERIAL_AN_BYPASS BIT(12)
#define MII_M1111_HWCFG_FIBER_COPPER_RES BIT(13) #define MII_M1111_HWCFG_FIBER_COPPER_RES BIT(13)
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO BIT(15) #define MII_M1111_HWCFG_FIBER_COPPER_AUTO BIT(15)
...@@ -629,6 +632,51 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev) ...@@ -629,6 +632,51 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev)
return genphy_check_and_restart_aneg(phydev, changed); return genphy_check_and_restart_aneg(phydev, changed);
} }
static int m88e1111_config_aneg(struct phy_device *phydev)
{
int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
int err;
if (extsr < 0)
return extsr;
/* If not using SGMII or copper 1000BaseX modes, use normal process.
* Steps below are only required for these modes.
*/
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
(extsr & MII_M1111_HWCFG_MODE_MASK) !=
MII_M1111_HWCFG_MODE_COPPER_1000X_AN)
return marvell_config_aneg(phydev);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
/* Configure the copper link first */
err = marvell_config_aneg(phydev);
if (err < 0)
goto error;
/* Do not touch the fiber page if we're in copper->sgmii mode */
if (phydev->interface == PHY_INTERFACE_MODE_SGMII)
return 0;
/* Then the fiber link */
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
err = marvell_config_aneg_fiber(phydev);
if (err < 0)
goto error;
return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
error:
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
static int m88e1510_config_aneg(struct phy_device *phydev) static int m88e1510_config_aneg(struct phy_device *phydev)
{ {
int err; int err;
...@@ -814,6 +862,28 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev) ...@@ -814,6 +862,28 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev)
MII_M1111_HWCFG_FIBER_COPPER_AUTO); MII_M1111_HWCFG_FIBER_COPPER_AUTO);
} }
static int m88e1111_config_init_1000basex(struct phy_device *phydev)
{
int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
int err, mode;
if (extsr < 0)
return extsr;
/* If using copper mode, ensure 1000BaseX auto-negotiation is enabled */
mode = extsr & MII_M1111_HWCFG_MODE_MASK;
if (mode == MII_M1111_HWCFG_MODE_COPPER_1000X_NOAN) {
err = phy_modify(phydev, MII_M1111_PHY_EXT_SR,
MII_M1111_HWCFG_MODE_MASK |
MII_M1111_HWCFG_SERIAL_AN_BYPASS,
MII_M1111_HWCFG_MODE_COPPER_1000X_AN |
MII_M1111_HWCFG_SERIAL_AN_BYPASS);
if (err < 0)
return err;
}
return 0;
}
static int m88e1111_config_init(struct phy_device *phydev) static int m88e1111_config_init(struct phy_device *phydev)
{ {
int err; int err;
...@@ -836,6 +906,12 @@ static int m88e1111_config_init(struct phy_device *phydev) ...@@ -836,6 +906,12 @@ static int m88e1111_config_init(struct phy_device *phydev)
return err; return err;
} }
if (phydev->interface == PHY_INTERFACE_MODE_1000BASEX) {
err = m88e1111_config_init_1000basex(phydev);
if (err < 0)
return err;
}
err = marvell_of_reg_init(phydev); err = marvell_of_reg_init(phydev);
if (err < 0) if (err < 0)
return err; return err;
...@@ -2658,7 +2734,28 @@ static struct phy_driver marvell_drivers[] = { ...@@ -2658,7 +2734,28 @@ static struct phy_driver marvell_drivers[] = {
/* PHY_GBIT_FEATURES */ /* PHY_GBIT_FEATURES */
.probe = marvell_probe, .probe = marvell_probe,
.config_init = m88e1111_config_init, .config_init = m88e1111_config_init,
.config_aneg = marvell_config_aneg, .config_aneg = m88e1111_config_aneg,
.read_status = marvell_read_status,
.ack_interrupt = marvell_ack_interrupt,
.config_intr = marvell_config_intr,
.resume = genphy_resume,
.suspend = genphy_suspend,
.read_page = marvell_read_page,
.write_page = marvell_write_page,
.get_sset_count = marvell_get_sset_count,
.get_strings = marvell_get_strings,
.get_stats = marvell_get_stats,
.get_tunable = m88e1111_get_tunable,
.set_tunable = m88e1111_set_tunable,
},
{
.phy_id = MARVELL_PHY_ID_88E1111_FINISAR,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111 (Finisar)",
/* PHY_GBIT_FEATURES */
.probe = marvell_probe,
.config_init = m88e1111_config_init,
.config_aneg = m88e1111_config_aneg,
.read_status = marvell_read_status, .read_status = marvell_read_status,
.ack_interrupt = marvell_ack_interrupt, .ack_interrupt = marvell_ack_interrupt,
.config_intr = marvell_config_intr, .config_intr = marvell_config_intr,
...@@ -2989,6 +3086,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { ...@@ -2989,6 +3086,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
{ MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1111_FINISAR, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
......
...@@ -25,6 +25,9 @@ ...@@ -25,6 +25,9 @@
#define MARVELL_PHY_ID_88X3310 0x002b09a0 #define MARVELL_PHY_ID_88X3310 0x002b09a0
#define MARVELL_PHY_ID_88E2110 0x002b09b0 #define MARVELL_PHY_ID_88E2110 0x002b09b0
/* Marvel 88E1111 in Finisar SFP module with modified PHY ID */
#define MARVELL_PHY_ID_88E1111_FINISAR 0x01ff0cc0
/* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do /* The MV88e6390 Ethernet switch contains embedded PHYs. These PHYs do
* not have a model ID. So the switch driver traps reads to the ID2 * not have a model ID. So the switch driver traps reads to the ID2
* register and returns the switch family ID * register and returns the switch family ID
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment