ARM: dts: imx25-pinfunc: more defines

Add some defines currently missing, fix ordering to make the list
sorted by (mux_reg, mux_val), make sure pins are grouped by mux_reg.

The same definitions are missing from the old pinmux header
(arch/arm/mach-imx/iomux-mx25.h) but as only legacy machine support uses
that and therefor the existing list is obviously good enough I didn't
spend the effort to add the corresponding definitions there, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx25-pinfunc.h

@@ -17,48 +17,69 @@
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
 
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
 #define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
 #define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
 
 #define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
 #define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+#define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
 
 #define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
 #define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x16 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x17 0x000
 
 #define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
 #define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x16 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x17 0x000
 
 #define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
 #define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x16 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x17 0x000
 
 #define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
 #define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x16 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x17 0x000
 
 #define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
 #define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x16 0x000
 #define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
 
 #define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x17 0x000
 #define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x16 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x17 0x000
 
 #define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
 #define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x16 0x000
 #define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
 
 #define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
 #define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x16 0x000
 #define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
 
 #define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
 #define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x16 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
 
 #define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
 #define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x16 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x17 0x000
 
 #define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
 #define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x16 0x000
 #define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
 
 #define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
@@ -369,8 +390,8 @@
 #define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x13 0x000
 #define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x12 0x002
 #define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x12 0x002
 #define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
 
 #define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
@@ -471,20 +492,22 @@
 #define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
 #define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
 
-#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
-
 #define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
 #define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
 #define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
 
 #define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
 #define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
 
 #define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x11 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x12 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x13 0x001
 #define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
 
 #define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x12 0x001
 #define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
 
 #define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
@@ -505,6 +528,7 @@
 #define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
 #define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
+
 #define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
 #define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
 
@@ -517,6 +541,7 @@
 
 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+
 #define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000