Staging: sm750fb: Insert spaces after commas in two files.

Insert Spaces after commas to rectify the following
checkpatch errors in ddk750_help.c and ddk750_mode.c:
ERROR: space required after that ','
Signed-off-by: Isaac Assegai <isaac.a.travers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/sm750fb/ddk750_help.c

@@ -7,7 +7,7 @@ char revId750 = 0;
 unsigned short devId750 = 0;
 
 /* after driver mapped io registers, use this function first */
-void ddk750_set_mmio(void __iomem * addr,unsigned short devId,char revId)
+void ddk750_set_mmio(void __iomem * addr, unsigned short devId, char revId)
 {
 	mmio750 = addr;
 	devId750 = devId;

drivers/staging/sm750fb/ddk750_mode.c

@@ -75,15 +75,15 @@ static unsigned long displayControlAdjust_SM750LE(mode_parameter_t *pModeParam,
 
 
 /* only timing related registers will be  programed */
-static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll)
+static int programModeRegisters(mode_parameter_t * pModeParam, pll_value_t * pll)
 {
 	int ret = 0;
 	int cnt = 0;
-	unsigned int ulTmpValue,ulReg;
+	unsigned int ulTmpValue, ulReg;
 	if(pll->clockType == SECONDARY_PLL)
 	{
 		/* programe secondary pixel clock */
-		POKE32(CRT_PLL_CTRL,formatPllReg(pll));
+		POKE32(CRT_PLL_CTRL, formatPllReg(pll));
         POKE32(CRT_HORIZONTAL_TOTAL,
               FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
             | FIELD_VALUE(0, CRT_HORIZONTAL_TOTAL, DISPLAY_END, pModeParam->horizontal_display_end - 1));
@@ -101,29 +101,29 @@ static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll)
             | FIELD_VALUE(0, CRT_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
 
 
-		ulTmpValue = FIELD_VALUE(0,CRT_DISPLAY_CTRL,VSYNC_PHASE,pModeParam->vertical_sync_polarity)|
-					  FIELD_VALUE(0,CRT_DISPLAY_CTRL,HSYNC_PHASE,pModeParam->horizontal_sync_polarity)|
-					  FIELD_SET(0,CRT_DISPLAY_CTRL,TIMING,ENABLE)|
-					  FIELD_SET(0,CRT_DISPLAY_CTRL,PLANE,ENABLE);
+		ulTmpValue = FIELD_VALUE(0, CRT_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity)|
+					  FIELD_VALUE(0, CRT_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity)|
+					  FIELD_SET(0, CRT_DISPLAY_CTRL, TIMING, ENABLE)|
+					  FIELD_SET(0, CRT_DISPLAY_CTRL, PLANE, ENABLE);
 
 
 		if(getChipType() == SM750LE){
-			displayControlAdjust_SM750LE(pModeParam,ulTmpValue);
+			displayControlAdjust_SM750LE(pModeParam, ulTmpValue);
 		}else{
 			ulReg = PEEK32(CRT_DISPLAY_CTRL)
-					& FIELD_CLEAR(CRT_DISPLAY_CTRL,VSYNC_PHASE)
-					& FIELD_CLEAR(CRT_DISPLAY_CTRL,HSYNC_PHASE)
-					& FIELD_CLEAR(CRT_DISPLAY_CTRL,TIMING)
-					& FIELD_CLEAR(CRT_DISPLAY_CTRL,PLANE);
+					& FIELD_CLEAR(CRT_DISPLAY_CTRL, VSYNC_PHASE)
+					& FIELD_CLEAR(CRT_DISPLAY_CTRL, HSYNC_PHASE)
+					& FIELD_CLEAR(CRT_DISPLAY_CTRL, TIMING)
+					& FIELD_CLEAR(CRT_DISPLAY_CTRL, PLANE);
 
-			 POKE32(CRT_DISPLAY_CTRL,ulTmpValue|ulReg);
+			 POKE32(CRT_DISPLAY_CTRL, ulTmpValue|ulReg);
 		}
 
 	}
 	else if(pll->clockType == PRIMARY_PLL)
 	{
 		unsigned int ulReservedBits;
-		POKE32(PANEL_PLL_CTRL,formatPllReg(pll));
+		POKE32(PANEL_PLL_CTRL, formatPllReg(pll));
 
         POKE32(PANEL_HORIZONTAL_TOTAL,
               FIELD_VALUE(0, PANEL_HORIZONTAL_TOTAL, TOTAL, pModeParam->horizontal_total - 1)
@@ -141,16 +141,16 @@ static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll)
               FIELD_VALUE(0, PANEL_VERTICAL_SYNC, HEIGHT, pModeParam->vertical_sync_height)
             | FIELD_VALUE(0, PANEL_VERTICAL_SYNC, START, pModeParam->vertical_sync_start - 1));
 
-		ulTmpValue = FIELD_VALUE(0,PANEL_DISPLAY_CTRL,VSYNC_PHASE,pModeParam->vertical_sync_polarity)|
-					FIELD_VALUE(0,PANEL_DISPLAY_CTRL,HSYNC_PHASE,pModeParam->horizontal_sync_polarity)|
-					FIELD_VALUE(0,PANEL_DISPLAY_CTRL,CLOCK_PHASE,pModeParam->clock_phase_polarity)|
-					FIELD_SET(0,PANEL_DISPLAY_CTRL,TIMING,ENABLE)|
-					FIELD_SET(0,PANEL_DISPLAY_CTRL,PLANE,ENABLE);
+		ulTmpValue = FIELD_VALUE(0, PANEL_DISPLAY_CTRL, VSYNC_PHASE, pModeParam->vertical_sync_polarity)|
+					FIELD_VALUE(0, PANEL_DISPLAY_CTRL, HSYNC_PHASE, pModeParam->horizontal_sync_polarity)|
+					FIELD_VALUE(0, PANEL_DISPLAY_CTRL, CLOCK_PHASE, pModeParam->clock_phase_polarity)|
+					FIELD_SET(0, PANEL_DISPLAY_CTRL, TIMING, ENABLE)|
+					FIELD_SET(0, PANEL_DISPLAY_CTRL, PLANE, ENABLE);
 
         ulReservedBits = FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_1_MASK, ENABLE) |
                          FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_2_MASK, ENABLE) |
                          FIELD_SET(0, PANEL_DISPLAY_CTRL, RESERVED_3_MASK, ENABLE)|
-                         FIELD_SET(0,PANEL_DISPLAY_CTRL,VSYNC,ACTIVE_LOW);
+                         FIELD_SET(0, PANEL_DISPLAY_CTRL, VSYNC, ACTIVE_LOW);
 
         ulReg = (PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits)
               & FIELD_CLEAR(PANEL_DISPLAY_CTRL, CLOCK_PHASE)
@@ -168,14 +168,14 @@ static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll)
 		*       next vertical sync to turn on/off the plane.
 		*/
 
-		POKE32(PANEL_DISPLAY_CTRL,ulTmpValue|ulReg);
+		POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
 #if 1
 		while((PEEK32(PANEL_DISPLAY_CTRL) & ~ulReservedBits) != (ulTmpValue|ulReg))
 		{
 			cnt++;
 			if(cnt > 1000)
 				break;
-			POKE32(PANEL_DISPLAY_CTRL,ulTmpValue|ulReg);
+			POKE32(PANEL_DISPLAY_CTRL, ulTmpValue|ulReg);
 		}
 #endif
 	}
@@ -185,20 +185,20 @@ static int programModeRegisters(mode_parameter_t * pModeParam,pll_value_t * pll)
 	return ret;
 }
 
-int ddk750_setModeTiming(mode_parameter_t * parm,clock_type_t clock)
+int ddk750_setModeTiming(mode_parameter_t * parm, clock_type_t clock)
 {
 	pll_value_t pll;
 	unsigned int uiActualPixelClk;
 	pll.inputFreq = DEFAULT_INPUT_CLOCK;
 	pll.clockType = clock;
 
-	uiActualPixelClk = calcPllValue(parm->pixel_clock,&pll);
+	uiActualPixelClk = calcPllValue(parm->pixel_clock, &pll);
 	if(getChipType() == SM750LE){
 		/* set graphic mode via IO method */
-		outb_p(0x88,0x3d4);
-		outb_p(0x06,0x3d5);
+		outb_p(0x88, 0x3d4);
+		outb_p(0x06, 0x3d5);
 	}
-	programModeRegisters(parm,&pll);
+	programModeRegisters(parm, &pll);
 	return 0;
 }