Commit 196eec40 authored by Maxime Chevallier's avatar Maxime Chevallier Committed by David S. Miller

net: pcs: Drop the TSE PCS driver

Now that we can easily create a mdio-device that represents a
memory-mapped device that exposes an MDIO-like register layout, we don't
need the Altera TSE PCS anymore, since we can use the Lynx PCS instead.
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarMaxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent db48abba
......@@ -909,13 +909,6 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/altera/
ALTERA TSE PCS
M: Maxime Chevallier <maxime.chevallier@bootlin.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/pcs/pcs-altera-tse.c
F: include/linux/pcs-altera-tse.h
ALTERA UART/JTAG UART SERIAL DRIVERS
M: Tobias Klauser <tklauser@distanz.ch>
L: linux-serial@vger.kernel.org
......
......@@ -33,10 +33,4 @@ config PCS_RZN1_MIIC
on RZ/N1 SoCs. This PCS converts MII to RMII/RGMII or can be set in
pass-through mode for MII.
config PCS_ALTERA_TSE
tristate
help
This module provides helper functions for the Altera Triple Speed
Ethernet SGMII PCS, that can be found on the Intel Socfpga family.
endmenu
......@@ -7,4 +7,3 @@ obj-$(CONFIG_PCS_XPCS) += pcs_xpcs.o
obj-$(CONFIG_PCS_LYNX) += pcs-lynx.o
obj-$(CONFIG_PCS_MTK_LYNXI) += pcs-mtk-lynxi.o
obj-$(CONFIG_PCS_RZN1_MIIC) += pcs-rzn1-miic.o
obj-$(CONFIG_PCS_ALTERA_TSE) += pcs-altera-tse.o
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2022 Bootlin
*
* Maxime Chevallier <maxime.chevallier@bootlin.com>
*/
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/pcs-altera-tse.h>
/* SGMII PCS register addresses
*/
#define SGMII_PCS_LINK_TIMER_0 0x12
#define SGMII_PCS_LINK_TIMER_1 0x13
#define SGMII_PCS_IF_MODE 0x14
#define PCS_IF_MODE_SGMII_ENA BIT(0)
#define PCS_IF_MODE_USE_SGMII_AN BIT(1)
#define PCS_IF_MODE_SGMI_HALF_DUPLEX BIT(4)
#define PCS_IF_MODE_SGMI_PHY_AN BIT(5)
#define SGMII_PCS_SW_RESET_TIMEOUT 100 /* usecs */
struct altera_tse_pcs {
struct phylink_pcs pcs;
void __iomem *base;
int reg_width;
};
static struct altera_tse_pcs *phylink_pcs_to_tse_pcs(struct phylink_pcs *pcs)
{
return container_of(pcs, struct altera_tse_pcs, pcs);
}
static u16 tse_pcs_read(struct altera_tse_pcs *tse_pcs, int regnum)
{
if (tse_pcs->reg_width == 4)
return readl(tse_pcs->base + regnum * 4);
else
return readw(tse_pcs->base + regnum * 2);
}
static void tse_pcs_write(struct altera_tse_pcs *tse_pcs, int regnum,
u16 value)
{
if (tse_pcs->reg_width == 4)
writel(value, tse_pcs->base + regnum * 4);
else
writew(value, tse_pcs->base + regnum * 2);
}
static int tse_pcs_reset(struct altera_tse_pcs *tse_pcs)
{
u16 bmcr;
/* Reset PCS block */
bmcr = tse_pcs_read(tse_pcs, MII_BMCR);
bmcr |= BMCR_RESET;
tse_pcs_write(tse_pcs, MII_BMCR, bmcr);
return read_poll_timeout(tse_pcs_read, bmcr, (bmcr & BMCR_RESET),
10, SGMII_PCS_SW_RESET_TIMEOUT, 1,
tse_pcs, MII_BMCR);
}
static int alt_tse_pcs_validate(struct phylink_pcs *pcs,
unsigned long *supported,
const struct phylink_link_state *state)
{
if (state->interface == PHY_INTERFACE_MODE_SGMII ||
state->interface == PHY_INTERFACE_MODE_1000BASEX)
return 1;
return -EINVAL;
}
static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
u32 ctrl, if_mode;
ctrl = tse_pcs_read(tse_pcs, MII_BMCR);
if_mode = tse_pcs_read(tse_pcs, SGMII_PCS_IF_MODE);
/* Set link timer to 1.6ms, as per the MegaCore Function User Guide */
tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_0, 0x0D40);
tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_1, 0x03);
if (interface == PHY_INTERFACE_MODE_SGMII) {
if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
} else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
}
ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
tse_pcs_write(tse_pcs, MII_BMCR, ctrl);
tse_pcs_write(tse_pcs, SGMII_PCS_IF_MODE, if_mode);
return tse_pcs_reset(tse_pcs);
}
static void alt_tse_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
u16 bmsr, lpa;
bmsr = tse_pcs_read(tse_pcs, MII_BMSR);
lpa = tse_pcs_read(tse_pcs, MII_LPA);
phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
}
static void alt_tse_pcs_an_restart(struct phylink_pcs *pcs)
{
struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
u16 bmcr;
bmcr = tse_pcs_read(tse_pcs, MII_BMCR);
bmcr |= BMCR_ANRESTART;
tse_pcs_write(tse_pcs, MII_BMCR, bmcr);
/* This PCS seems to require a soft reset to re-sync the AN logic */
tse_pcs_reset(tse_pcs);
}
static const struct phylink_pcs_ops alt_tse_pcs_ops = {
.pcs_validate = alt_tse_pcs_validate,
.pcs_get_state = alt_tse_pcs_get_state,
.pcs_config = alt_tse_pcs_config,
.pcs_an_restart = alt_tse_pcs_an_restart,
};
struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev,
void __iomem *pcs_base, int reg_width)
{
struct altera_tse_pcs *tse_pcs;
if (reg_width != 4 && reg_width != 2)
return ERR_PTR(-EINVAL);
tse_pcs = devm_kzalloc(&ndev->dev, sizeof(*tse_pcs), GFP_KERNEL);
if (!tse_pcs)
return ERR_PTR(-ENOMEM);
tse_pcs->pcs.ops = &alt_tse_pcs_ops;
tse_pcs->base = pcs_base;
tse_pcs->reg_width = reg_width;
return &tse_pcs->pcs;
}
EXPORT_SYMBOL_GPL(alt_tse_pcs_create);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Altera TSE PCS driver");
MODULE_AUTHOR("Maxime Chevallier <maxime.chevallier@bootlin.com>");
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Bootlin
*
* Maxime Chevallier <maxime.chevallier@bootlin.com>
*/
#ifndef __LINUX_PCS_ALTERA_TSE_H
#define __LINUX_PCS_ALTERA_TSE_H
struct phylink_pcs;
struct net_device;
struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev,
void __iomem *pcs_base, int reg_width);
#endif /* __LINUX_PCS_ALTERA_TSE_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment